How to Replace Accessory Drive Belt Tensioner 2006-2011 Honda Civic

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@tigersblood12212012]

I really feel that you give the most concise and accurate guide videos on the web. Very much appreciated!

[@TRQ]

+tigersblood12212012 Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@kryptik0]

The part you are showing at the beginning of the video is not a belt tensioner. In fact the part you show is not needed on the Civic, which has these pulleys: power steering, belt tensioner, crankshaft, coolant, a/c and alternator. There is no other pulley on this car. The part you are showing is actually an idler pulley which is not part of the civic drive belt system.

[@fakename3891]

Do you have any tips on removing the three bolts on the pulley ? Mine or torqued down so hard I cant get them off. Even putting a huge amount of force on the back side of the pulley I cant get them to budge.

[@larrygriffin7024]

I like this video you make it simple and the best part was no music thank you so much

[@MarkMyWordsXx]

What are the chances you can get to that pivot bolt without taking the pulley off?

[@shannonblair85]

So if you’re only needing to replace the belt and the pulley tensioner, then we don’t need to touch the alternator at all, right?

[@jaautoworks]

Luckily I was able to re-torque everything and replace just the belt, “rattling” noise coming from tensioner is gone. Very low cost if you can’t spend the money on replacing everything. Of course if the idler is some what still in good shape. Hope this helps

[@nicholasmazzone3386]

Please show the tool you use for every job thanks

[@xXDannySilvaXx]

Only thing about your videos I dont like is how easy you make this stuff look.

[@OctavioR_]

What can I do if my tensioner bolt is broken and I can’t loosen the tension off the belt

[@jefftheall5975]

Good video - very helpful

[@rodecodetv8025]

This is one of the best videos I ever watch you so accurate...

[@dinkwoodham80]

When you go th tight the bolts on water pump just put belt back on amd it will hold in place thank me later

[@lukegeekwalker2689]

Unfortunately my tensioner bolt was so tight started rounding the inside of it smh what a nightmare

[@ChickenNugger178]

Yup.. for some reasons those bolts are tight as f... How did you managed to solve it?

[@ikillzuepicly316]

I hate my Honda only because I have big hands and getting to some of the smaller spaces is painful😂

[@carlosbastos114]

Thanks a lot!

[@obee69242000]

what do you mean the backing of the belt against the pulley

[@DavidBenson-d7z]

What were those 10 mil bolts he loosened?

[@ralphianballezazarandin4527]

Whats the indicator that it needs to be replaced?