How to Replace Airbag Clock Spring 2007-2010 Chrysler Sebring

Buy Now!
New Airbag Clock Spring from 1AAuto.com 1aau.to/ia/MPSTC00007
This video shows you how to install an airbag clock spring on your 2007-2010 Chrysler Sebring. The clock spring is what connects the various electrical components in your steering wheel to the vehicle’s electrical systems. Things like the horn, airbag, and even media controls rely on it to work properly. If you face issues with any of those components, a new clock spring may be what you need.
This process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oP2/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oP2/1AXAA00013
• Pocket Screwdriver
• 10mm Socket 1aau.to/oIU/1AXAA00017
• 13mm Socket 1aau.to/oPr/1AXAA00015
• T20 Driver 1aau.to/oiY/1AXAA00008
• Socket Driver
• Socket Extensions 1aau.to/oPr/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/ozF/1AXAA00044
• Gloves 1aau.to/of6/1AXSS00048
• Magnet - Extendable
Subscribe: / @trq
Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation: • Chrysler Sebring 2007-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@LewKos553]

Thanks for this video

[@juanpb2010]

did you get code or how did you know this was the issue? i have the airbag light on and ive disconnected the harnesses in the bottom of the sits but its keep coming back

[@trucavalier]

What if you have the electronic board attached to the wheel? I can’t find any videos

[@Tank27169]

Can I just disconnect the cable from the top or does it have to be from the battery directly

[@estebanarmendariz2185]

Can I put aftermarket steering in.?

[@KeymeeKay]

Is this video for the airbag light being on? Also did you first just disconnect the power under the hood?

[@janeriaharris5028]

Having problems with steering wheel coming off