How to replace any iPhone logic board connector

Support our work by sending us a repair, buying supplies or coming for training. www.ipadrehab.com
All the tools and supplies we use in videos are available at www.ipadrehab.store
Jessa’s Equipment Links:
Our thermal camera recommendation:
Seek Compact Pro for Android amzn.to/2J5kkfA
Seek Compact Pro for iOS amzn.to/2RXrF4H
Macro Close Up Lens for SEEK COMPACT PRO THERMAL CAMERA tinyurl.com/5d5mbdmz
›Charging:
USB ammeter: amzn.to/2k2suZN
Bona fide MFI charging cables
Anker: amzn.to/3u3GqIG
Anker USB-C: amzn.to/3KIMbSm
›Microscopy:
Recommended microscope: amzn.to/3IyoBFT
Light ring for microscope: amzn.to/2iRRdOt
Barlow lens: tinyurl.com/4nz4j8x6
›Soldering:
My soldering station with standard iron: amzn.to/2hG656k
Primary soldering tool--mini hot tweezers amzn.to/2hY5DN5
Favorite tips for mini hot tweezer: amzn.to/2iSKF67
Favorite tip for standard iron: BC2 amzn.to/344iWZ2
›Ultrasonic cleaning:
Crest iphone sized cleaner: amzn.to/3qVxO52
Branson EC cleaning fluid: amzn.to/2iSVuFq
›Hot Air:
My hot air station: JBC TE-1QD not available on Amazon, $1500
Recommended station Quick :tinyurl.com/2p8b6487
›Small supplies:
My favorite tweezers--store.ipadrehab.com/Our-favor...
My favorite flux:amzn.to/2iCy5Vm
My favorite solder:amzn.to/2hY1gBA
Kapton tape: amzn.to/2iqxVAY
My blue mat: amzn.to/2jfAiKp
Cutting board I solder on: amzn.to/2kDO0XJ
Low melt alloy:amzn.to/2iqITGB
UV light: tinyurl.com/39kc3he7
›Diagnostic tools:
Tristar tester: tinyurl.com/3573s3yv
DC Power supply: amzn.to/2iRN9hj
Multimeter: Fluke 115 amzn.to/2iqMmou
Fine point tips for multimeter: amzn.to/2iRPjgP
Freeze spray:amzn.to/2iuNZnE
Zxwtool: tinyurl.com/2p86e33y
Storage Repair Case:
Christy’s Favorite for iPad Repair: amzn.to/3KIhQD6
Jessa’s Favorite for iPhone Repair: amzn.to/3qYTgGc
Large Size for iPhone Repair: amzn.to/35m1Gzh
iPad Rehab is a participant in the Amazon Affiliate marketing program and may receive commission for orders placed through above amazon affiliate product links.

[@nigelw598]

Brilliant instructional vid!! Very much appreciated. Thanks for taking the time. All the best to you, Cheers

[@colewalker9768]

Awesome video jessa, it's very much appreciated that you are making these. I am a tech at a small repair shop and I have plenty of problems where there is board level repair needed and we have to send it off for fixes. Cannot wait to be able to do these repairs myself as we have a whole solder station and noone to do the repairs!

[@relyksnunley]

I love your videos! Every time I have a repair question you have the answer and they are always fantastic videos!

[@repsolal]

excellent instructional video ! very detailed and well explained, tips.......... perfect. And NO annoying music ! someone actually talking

[@paulweston8184]

Detailed? How do you open it? haha

[@krzysztofstrehlau2759]

I had troubles soldering SODIMM connector to my prototype PCB - RPI CM3 carrier board. It looks like this technique (put tin on pcb first and then presolder with hot air) will solve my problem! Thank you for the video! Keep it up!

[@sharfazhameed6382]

Thx a million Jessy you are the best. I managed to replace one after watching your video

[@Cyclone1892]

lady, you have my respect

[@ponchortiz]

Great video! Congrats from QUERÉTARO, Mexico. Hope I can attend practical board repair some day.

[@katiedavidson8426]

I sent my son's ipad mini to your store on 12/14/18 to have the logic board connector replaced. Thank you for helping to repair it, you've made my son very happy. I will say for anyone hesitant on repairing their devices, iPad Rehab did a wonderful job, I had my device back in less than 10 days (and it was just before Christmas ) and the price was right. Thank you again!! I will absolutely use again and will recommend to others. Happy New Year from Chattanooga, Tennessee!

[@JessaJones]

Hey Katie--thanks! We'd love a copy/paste of your review on iPad Rehab Google page so that other folks can see it. We got a troll review today that it would be nice to bury :(

[@devinvance6441]

iPad Rehab i need help fixing my 2 iphones

[@tastytechaddictsmtb]

I do it exactly like you do apart from when iv re added solder I don't add any to the anchors. I only do that as iv found on some connectors the big anchor pads can take too much solder which stops the connector touching the regular pins properly. Il then go and solder the anchors after once the other pins are done. Your station is better than mine so prob removes the solder from the anchors a bit better than my cheap one :) , as I find it a ball ache to remove once added. Then I just do the same as you and go over each joint. Seems to do the job.

[@JessaJones]

I don't get ball aches, that's probably why it works for me.

[@UzunKamis]

This is a great video. Thank you. Do you mind letting us know how much heat in C did you apply?

[@neil8288]

Man you have skills, I ordered 5 - 6s connectors for a practice board and have used 4 up already. 1 left now I am gonna nail it lol....

[@steve0826]

Did you eventually buy Apple instead?

[@Zendarkos]

If you use a good quality soldering iron, with a fine tip, you can basically install the new connector using only the soldering iron. This way you are less likely to destroy it by excessive heat.

[@pr0xZen]

@@Zendarkos depends on your skill and steadiness with (regular) tweezers vs the iron. Some people are really steady, precise and swift with tweezers, but not with soldering iron or hot soldering tweezers. If you're one of those, using only hot air and regular tweezers, can yield just as good results. As Jessa points out here, if you're sensible about the temperature, you won't damage the plastic as long as you only touch and manipulate it by the beefy ground retaining tabs at each end.

[@nayynizz2660]

@Niel where did you buy the connectors from?

[@colinevans7134]

Your my favourite technician to watch anything to do and repair iphones, no messing, no time wasting and straight to the point , love you kind regards colin from croydon surrey England 👍👍👍👍👍❤

[@BICHPHUONGVO7475]

I am new to this - Start learning then I can spend my time - Thanks

[@danielkristensen5296]

Thank you so much for this!

[@SebastianGarcia-go4tx]

Love your vids Jessa :)

[@QuickStoprepair]

Your great thank you for your time!!!

[@manuelcamargo2682]

GREAT ! Excellent video lady . Thank You.

[@MicBergsma]

Fun to watch 😄 I need to replace that part on iPhone 6 and 8 🤯🤯

[@aland1618]

I watch you do the board repair and I miss working on those. I need a job fixing PCB's Nobody seems to fix electronics anymore except cell phones and tablets.

[@kaippanplakkal]

Good explain, and what temperature do you set?

[@kingyuxexes]

very good explanetion, thank you

[@stvgrz9394]

Such a professional.

[@stefanoprezzi9187]

BRAXISSIMA, ottimo anche il microscopio per vedere le saldature ! GOOD JOB !!!

[@LukeSky74b]

Great skills. Nice work!!

[@johnm4962]

Thank you for this video !!!

[@sharfazhameed6382]

You are a genius

[@satriorudi1979]

Please making videos about recovery data

[@micheasaldanadelangel194]

ipad rehab have you tried with the WD-40 I use it to desolder and solder the connector protects the plastic and does not burn the heat the best you do not need to use the captive to align it only aligns the new connector applies heat and ready the connector is accommodated alone and it is perfect alguin day test greetings

[@ajg2558]

You do nice work!

[@technolucas3720]

I went through 5 connectors the first time I did one (ipad air 2 dig) but I am starting to get the hang of it. I only used 2 connectors last time....definitely a skill that has to be learned by doing it...Great video! Also can you guys please source some good iPad 3D BGA stencils? I would really like some especially for ipad air 2 and can't seem to find a good set anywhere...I will buy them as soon as you put them up in your store!

[@JessaJones]

+technolucas we have the 3D stencils that we use every day available at iPad rehab supply.

[@102MRG]

Добрый день! Подписался. Вы просто молодец!!! Умеете очень аккуратно и главное профессионално работать.

[@AppleBarbieri]

Idola!!! Gracias

[@HerbaL1st]

What lead wire should you use? Can you use the same one for all components on the Iphone/Ipad motherboard?

[@stanleyjoseph876]

Really Helpful

[@aland1618]

Question: I see both you and Louis Rossman use flux on connectors but there is rosin (flux) core solders so I wondering if you use flux by default because it aids in the soldering process or do you use rosin core solder on certain parts only? As an electronics tech I tend to use flux when I have more than one connection to work on. If it's a single side like a cap or resister I use rosin core solder to reduce the cleanup later.

[@MandangoGC]

Jessa, you don't think is easier with solder paste?

[@MiguelLopez-rh9mt]

Hi God bless you. Please which chips do I have to change from a damaged logic board to another logic board please? Thxs

[@AC_Milan1899]

Wow made that look so easy!

[@mostafahassan5021]

Wow. You are so intelligent and excellent as well.

[@davidvalens3337]

Can you put tools used in the description

[@trngw]

So, what temperature are you using? Where should I start testing?

[@suzuki1000fv]

Hi IPR ,what is the temperture that you use on hot air that it does not melt the conector plastic?

[@vidalcharide]

Thank you excellent video

[@CarlosRocker42]

Hello, would you help me to know the name of this equipment that you look through, to amplify the mainboard, like a microscope. I'd like to know the proper name. I thank you so much for the video and the answer.

[@CarlosRocker42]

Oh sorry, I found your video explaining it all! hehe. Thanks!

[@amirshakeel261]

Nice teacher.are you very helpful

[@supercrazymario404]

Since it’s leaded solder and stronger than unleaded, would it be adequate to simply add some solder to the corners once the new connector is put on rather than adding solder to each of the contact pads?

[@franckdavis7858]

Hi please how to regulate the hot air smd soldering station for a connector on the motherboard of a telephone please

[@AmongUs-mb4qx]

Few pins on my phone are missing, is there any easy way to replace them without pulling the connector off?

[@colinevans7134]

Love your videos, I've got to renew fpc connector never done this before but I have all the equipment to do this, I know you don't but can I put heat tape all around the connector so I don't get any other components dislodge kind regards colin from croydon surrey England, ps I have spair logic boards to practice on first

[@Benchandbeyond]

Hi Jessa, I cannot seem to get the solder to reflow no matter what I do. I am using sn62 tin/lead solder and a hot air temp of 380. Can you advise which solder is best to get reflow?

[@edmenji2834]

Good job

[@5222muthu]

I love u r work ❤️

[@ElAndresRodriguez]

I have an iPhone 6 plus that a repair shop messed up. I've been doing the simple LCD switch out that anyone can do but would like to try to learn how to solder. Should I learn on the motherboard of another spare device I have laying around and send this into you guys? Or learn and do this phone?

[@tanelv1909]

Where would it be possible to buy these connectors? I accidentally broke 3 pins off the volume and lightning connector. Its the 18pin one next to the lcd connectors.

[@pr0xZen]

What is a reasonably safe temperature range here for a capable unit (ie. the typical Quick, Atten etc) - are we talking 375'C, or more in the 250'C range?

[@Mobilerepairsolutions07]

You have very stable work. Very cool super women fan from india

[@alexkira5]

Beautiful

[@KG-Handy-Store]

Hi, can you tell me which solder does you use??

[@techoutpost2945]

What temperature do you use on your hot air, around 320?

[@pr0xZen]

Is there any tip adjustment to the hakko mini hot tweezers? The pivot screw seems, reasonably tight, but can't see any point of adjustments. I got a proper, matching T9-I set from official distributor (well over $100 around here), but the tips don't meet properly. Have to put significant sideways force at the same time as clamping them, otherwise the tips, are like at least 0.15-.2mmm off from meeting as intended. Making it really hard to get a grip on smds, and even worse keeping the grip. Because they slip off one end, and because the force exerted to push the yellow hinged portion sideways, induce small tremors, attenuated at the tweezer tips.

[@hariomdecor3969]

what is the procedure to use padsviewer ? its very necessary and i dont know where its available !

[@MuhammadYaseen-vx5hw]

Hi dear, i am very much impressed while watching this video. But, i have facing a problem while i connect lcd strip into strip connector in Projector (Epson ELP 7600), Connector locking pin has broken and miss led. Kindly suggest and oblige.

[@omgluckygaming7008]

i have a i phone 7plus display not showng lighting problom you can tell me sulution

[@tzuyuinternational679]

iPhone 7??? Nice hand work 👍👍

[@ashkira27]

good day ma'am... what's the name of the flat wire that you scratch to clean to connector...i hope, you will answer me ma'am... thank you very much ..God bless ang more power...☺️🤗🤗

[@baghdadiabdellatif1581]

thank you madam. From Algeria

[@loyalty786]

Hi, is that possible to have replaced at any repair shop?

[@hojam01]

what temperature you use on air hot gun

[@googacct]

If you have to adjust the temperature on your reflow station because the air termperature is not consistent, why not use a separate meter with a thermocouple probe to verify the air temperature instead of having to guess.

[@hardeephappy9738]

Verry good work mam

[@nadirsadiq6345]

I can not solder for nuts so wanted to know if you provide this service. I successfully damaged the LCD FPC connector on my moto Z4 and would like to get it replaced.

[@arifmohammed1330]

I am interested tring course

[@big_mo_the_handyman]

Can you replace few of those on my phone?

[@gotindani3478]

What do you put to remove the connector? please, help me

[@leopcnet]

inspirador para quem pretende iniciar na profissao de repador de telemovel

[@ourdevice3941]

FPC Conector charge iPhone7G is the same as iphone7plus?

[@arcostek9867]

How much would it cost for iPhone 11 repair? The lcd connector is damaged

[@Carolina.Martinez.Martinez]

What is that gel you use?

[@obinnakingsley8875]

The site recommended for buying spare parts are for university addimition advert

[@benmarou6394]

HI HOW ARE U§ great work can u list of tools and brand u use it ! and heat temperature !

[@JessaJones]

You can find links to all our recommended equipment by clicking the video description

[@mohamedmufthi4536]

How much heat & air connector removing plz tell

[@gajjargaurang5330]

Fast tining lcd connector afterwards aftur mounting pcb

[@rajeshdhanda6875]

I am new learned tacnician from where I can get apple phone schmaticdiagram

[@zx8401ztv]

Sounded like you were a bit flat jessa, that cold sapping the energy?

[@TechnoShahSuri]

nice video

[@KabeloMohohoma-ff5jp]

Hi how do you repair iphone xr lcd connector ?

[@nigusssemulat7356]

wow thank you

[@funnyMONKEY7970]

Can you help me ? My lg v521 fcp connector is tear down is it possible fixing it?

[@mantowijaya3953]

miss... tutorial menggunakan blower quick 2008

[@MostafaAli-ib5xh]

Very good

[@mosheurkazi]

Thanks

[@rameshbobby7]

Need to replace my Sony board connector..I was tried to fix it..but failed...plz reply mam

[@maymay799]

Nice informative.....

[@anthonyodda6563]

Use hot tweezer when using wick.

[@rajeshdhanda6875]

My eye weak .which lence you use

[@angryman9333]

The best teach

[@abdosy2020]

What if the connector stripped off ..how could we fix it?

[@luciocastro2973]

What type of solder? & Flux🤔