How to Replace Blower Motor 92-96 GMC Sierra K1500

Buy Now!
New Heater Blower Motor with Fan Cage from 1AAuto.com 1aau.to/ic/1AHC...
1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor. This video is applicable to the 92, 93, 94, 95 96 GMC Sierra
🔧 List of tools used:
• 7mm Socket 1aau.to/oTg/1AX...
• Ratchet 1aau.to/oafx/1A...
• Socket Extensions 1aau.to/oZS/1AX...
• Hammer 1aau.to/okf/1AX...
For More Info visit us at 1aau.to/h/a8P/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@OtayBuckwheat]

Mine works on High only

[@nickdarling875]

Hey guys thank you . I was pretty sure on how to do it . Really I do know how but getting a Chance to see that you are going to do it right is awesome. Not something you do everyday. Thanks guys

[@Sheridantank]

I love how easy these trucks are to work on.

[@darkshadowsx5949]

its not that easy on a 94 2500k. there is a ton of things in the way that wasn't shown here.

[@garypugh8766]

My 97 Z71 4×4 wasn't like that.much harder.took a while to remove.7\32socket.9/32 socket.Removing glove box was different..hard to explain

[@archiebunker6059]

Thank you so much, gonna go fix my blower motor.

[@1AAuto]

You're welcome! +Archie Bunker

[@tomharmon9663]

Two little clips on the ecu. Tug your ecu towards drivers side and it will slip off of the bracket. Making life easier for those of you with that problem.

[@billydavenport8134]

thank you very much. saved me a couple hours

[@nhwilkinosn]

my 95 has the computer right to the right of the glove box, making it much more of a bear to get out than this video makes out.

[@cgonedfishing]

I had to remove the two 7mm holding the computer bracket down in order to remove the cover.

[@randyweflen4067]

How did you Navigate the computer

[@metalmikejr]

My 90 has the computer too. Gotta pull the computer out.

[@AlexPerez-jv3jg]

Thank you for this video it helped out tremendously! Middle of summer San Antonio Texas we are averaging a hundred degree weather and I have a 2 year old blower motor just went out maybe a couple of months ago, again thank you

[@1AAuto]

+Alex Perez Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@diegodavidsevilla7782]

Thanks for sharing bro!

[@rickyprince7281]

very very helpful. Thank you.

[@MakinEndsMeet69]

Well I hope the Sierra is like the Silverado model as you made that look extremely easy compared to a couple other videos I've watched I will give it a try cuz mine is starting to make noise and squeaking as easy as you made it looks I will try living it and cleaning it up first as as well as the Core 2 is I do not think it is ever been clean since 1996. Thank you for your video

[@juniorlugo2814]

Doing mine tomorrow thanks for the great video

[@1AAuto]

+Junior Lugo Thanks for checking us out. We hope this helps you get it done! 1aauto.com

[@nathanblackwell4597]

The new blower motor I ordered from y’all has a part glued in front of where the cooling tube is attached. I removed the tape that was there to keep things out during shipping and it looks like an internal ring is supposed to glue to the inside and have a spot that lines up with the holes, but it covers 1/3 of the hole and the cooling tube won’t attach to it

[@TrevortheBatman]

This video was helpful with the replacement, but my problem was that the new part from 1A Auto didn’t fit The new one was the same shape with all of the holes in the same place, but was like 1:.95 replica and the screws couldn’t line up

[@gmdubbya]

Ordered. Thanks for the video. Is there a video for the driver & passenger door window motor replacement?

[@shawnadams8381]

Excellent professional video. Thanks !

[@anthonydewayne712]

Do 93 Chevy...it’s not easy like u make it out to be

[@1AAuto]

+Anthony dewayne We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

[@TheShangralaaaa17]

They always make it look easy. If it was easy nobody would search for a video on how to do it lol

[@chevtruck1000]

With age comes brittleness. A shot of penetrating oil goes a long way to saving the fan. While it's off, cleaning the fan blades with soapy water and an old toothbrush will dramatically improve the airflow too.

[@jeffrrey6791]

Really?

[@oakvue45]

Great tutorial...I'm gonna do my 94 GMC Suburban real soon....it's chirping on high. Anyway, at 3:35 a little shot of WD-40 on the shaft would have made removal of fan easier....

[@waynemahaffey8220]

That's very helpful thank you very much

[@chrishuston8986]

Where’s your ecu and all the wiring

[@terryheisenberg1591]

Great video..Would this be a good time to clean the crud out of the evap?

[@1AAuto]

+Terry Tripple You could while you were already working on the vehicle. If you need to replace the blower motor, we carry the one shown in this video on our website, Here is a link to them. Hope this helps you out. www.1aauto.com/?KZbin&CTA+Comment&Klw0fEAo

[@jrperrotta]

It doesn't look like the motor spun smoothly. It looked like it was dragging, not freely. That may be the reason a resistor would blow

[@TheBartman55]

Do you sell the blower cover ? Can’t find in your inventory. Help?

[@chopzrodriguez5851]

Thanks brother!!

[@1AAuto]

+Chopz Rodriguez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@OtayBuckwheat]

Mine squeals and it sounds like there are leaves or something obstructing it, and it only seems to blow on high, so I ordered one since there are 25% off sales happening due to Black Friday.

[@karlhungus545]

I'm pretty sure when it blows only on high it's the resistor, no? My son's 95 Chev has this issue right now.

[@yzmoto80]

One can purchase the actual GM blower motor and wheel (OEM), from Amazon for $56. Are you making a better mouse trap ? Or just a trap ?

[@doug995.]

Thanks

[@joegray6269]

Does this apply to 1990 Chevy as well

[@drifterawh]

My 1995 has coumpter in the way. Not so easy.96 changed coumpter under hood.

[@randyweflen4067]

How did you navigate the computer

[@johningalls2793]

@@randyweflen4067how can I remove the computer

[@dogslovefun]

I am assuming the two wires are negative and positive and that's all the wires to the motor Correct?

[@1AAuto]

+Kjw Kjw Yes

[@trentkeller1418]

Sucks, video isn't very useful on a 1994. I have a 96 with a new motor and needed to pull it & install in a 94. 96 on up 15min job. 94 is comparatively a nightmare! Remove ECU, kick plate in door to remove side panel, loosen dash enough to lift etc!

[@drifterawh]

Ya mine has trucks ecm in the way about 1000 wires going to it. Its in the way .This video does not apply to 95 silverado

[@michaeltreetop3748]

Want to know how to change the Resistor in the 1995 chevrolet V8

[@1AAuto]

+Michael Treetop We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

[@michaeltreetop3748]

Want to know how to replace the resistor on 1995 chevrolet V8 engine.

[@1AAuto]

+Michael Treetop We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@cleckler2935]

Is it possible to buy the black cover for the fan? Can't seem to find it. Mine is all cracked up and falling apart...

[@1AAuto]

Thanks for checking us out! We are only showing to offer the fan as shown in the video. We do not offer a black cover for this item. You may be able to locate something through eBay motors. +EC Truckin

[@cleckler2935]

@@1AAuto thank you

[@drifterawh]

Ck out LMC truck

[@david.manser234]

Is this the same for a 94 Silverado ext cab?

[@chevtruck1000]

Almost. You're going to have to remove the passenger side kick plate to access the dash mount bolt ( i3mm) behind it. You're also going to want to remove the speaker cover on that side and pull the hold down bolt (7mm) then pry the steel dash frame away from the door post and towards the seat to give yourself enough room to pull the motor. Also if you're running a 6.5l diesel the computer is tucked in behind the glove box . Two spring clips on the front will release the computer ( no need to disconnect it) and the mounting bracket has two screws in the rear that you need to remove as well as two in the front that just have to be loosened. There is no cab air filter in a 94 so a shop vac on the a/c evaporator pocket will probably pull a surprising amount of shmoo out. I know mine did.

[@GOD719]

I have a 1990 Silverado. I just got the AC working again. Well... I Installed the high pressure cut out switch in the back of the compressor. I wired it to the lead and grounded it to the engine. When I turn on the AC. It works for a little bit and sounds like the defroster fan kicks on. Then the hvac control display shuts off and the ac switches to the defroster vents. When i unplug the pressure switch. The fan doesn't kick on but it works. No clue what's going on

[@LordCornholio31]

GOD719 theres blend door actuators on these trucks I have a 98 Silverado and got 3 actuators that work all the vent doors, make sure yours are all working sometimes

[@LordCornholio31]

Also the whole heater ac module may be no good as well

[@sandradavila3936]

GOD719 show vent s as the air is pushed out into cab

[@sandradavila3936]

can you show me a diagram of the aucsur atrous 3doors total.

[@sandradavila3936]

show diagram of the 3 doors act sur ators where they are located?

[@TheShangralaaaa17]

This should say 96+ cause 95 and down are terrible to do and not this easy.....

[@BurgerBin]

My screws were 5.5mm and only 5 screws

[@crempidowo3061]

wish the diesels didn’t put the computer right on top seriously

[@thorwilkinson2565]

Who the hell puts in a used part? I watched this video because my new fan is deeper than the original so I have to change them out. This doesn’t help me one bit.