How to Replace Blower Motor 96-04 Nissan Pathfinder

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@wattco007]

Would have been lost and taken advantage of by my local Mechanics if this video was not available, not a perfect Video instruction how ever it gave me the confidence to remove, replace with 100% result.

[@TruthSlayer11]

02 LE...just replaced resistor and blower motor ...both new... turned engine on and it started blowing hard and fast...BUT NOW IT WON'T TURN OFF?????

[@alexandroeugene4209]

I have a problem with my nissan pathfinder 2001 the passenger compartment fan only starts on the 3rd volume

[@1AAuto]

+Alexandro Eugène This is likely related to the blower motor resistor, not the blower motor. 1aauto.com

[@jayclark22]

2002 Pathfinder. The air will not blow all the time. It comes on and blows fine and then will stop and adjusting controls will not make it restart. Is this a normal symptom of a bad blower motor?

[@1AAuto]

+Jay Clark Yes this is a symptom of a bad blower motor. As we cannot properly diagnose vehicles online we suggest having this looked at by a professional. Thanks for watching.

[@Djdbot24]

My 01 pathfinder will work fine one day and then nothing the next. Yhe controls work fine but nothing is blowing. You think this is the blower or the resistor?

[@1AAuto]

+dbot 24 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

[@verlordsenpai]

does the 96 pathfinder have a cabin air filter ?

[@iarwainthabombadil7724]

got the blower motor from 1A a few days ago, about to install now. what is in the box to the left of the motor, and why would me smacking on it the past six months periodically cause the motor to start working again? i pray its just the filters. i though i was hitting the motor. oops.

[@1AAuto]

+Iarwain THA Bombadil Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@fernandoorellana1152]

My nissan frontier dont work when i put it on high level i changed the resistor its still not working could it be the blower motor?

[@1AAuto]

+fernando orellana If you have replaced the blower motor resistor and it still isn't working I would try the fuses. If they are fine try replacing the blower motor. Thanks for the question.

[@bipinsahani614]

Thanks brother for information

[@TruthSlayer11]

WHICH RELAYS RUN THE BLOWER MOTOR

[@OhItsCalvin]

great video

[@1AAuto]

+CALVIN Thanks for checking us out! 1AAuto.com

[@1AAuto]

+CALVIN Thanks for checking us out! 1AAuto.com

[@TheBsavage]

Yeah, except those "8 mm bolts" are really Phillip's head screws. And, disconnecting the power doesn't need a screwdriver. That's a trick by the maker of the video. If you try a screw driver to assist, you won't be successful. Use your finger instead. The clip is designed for that, not for a screwdriver. Wiggling the fan out can be a little tricky too, but is possible with enough finesse.