How to Replace Blower Motor with Fan Cage 98-02 Honda Accord

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@jdghoude]

I heard a noise from the blower. I followed the step in this video and I found a dead leaf in the blower. I removed it and reinstalled. No more noise. Thanks a lot for videos. And dont forget to stretch before doing this!

[@1AAuto]

Thanks for watching. Have a great day! 1aauto.com 888-844-3393

[@xm1193]

LOL step 1...position yourself so your left leg is out the sunroof, as your right leg braces against the open passenger door.

[@PreppyGuy007]

I own a 1999 Honda Accord EX V6 since the day I pick it up from the dealership in July, 1999. Overtime, I have felt that motors begin to degrade and are need of a replacement. In short, I have removed my glove box and lower panel a few times within the twenty five year span. Well, after twenty five years, my blower now sounds like a motor boat. Being that I do not like tackling a job blindly, in this case, I would remove the lower panel. The panel directly below the glove box. This would improve your visibility when it comes to wire harnesses. Thanks to your video, I do not have to remove the glove box as well. I thank you for that. 🙂 Now my only discussion is whether to buy the OEM part from Honda or purchase the aftermarket from you. I see quite a few aftermarket fans are plastic. I believe the OEM is metal. Let's stay focused gentlemen. In reviewing the messages, I see we're steering way from the topic and talking about sub topics. Such as compressors, belts. condensers, dryers, upper and lower pressure hoses, etc.

[@1AAuto]

+@PreppyGuy007 Thanks for the feedback!

[@keepitsimple8]

THANK YOU FOR THE GREAT VIDEO!!! The video doesn't show it but remember to take the motor's heat shield cover off the old motor and put it on the new one. That shield has some insolation to protect a bare foot/leg from touching the motor as it does get warm! You can see at 2:10 the heat shield on the old motor and how the new motor has the holes for the shield to be attached to it. If it means anything to someone else, even when pushing in the tab on the clip for the wires to the resistor, I was unable to unplug it and was afraid to use any more force to pull it out. I WAS able to "weedle" the motors around the resistor wires by turning the motors left and right until I was able to get the "tabs" for the 8mm bolts around the wires to the resistor. It took some patience but I got it done that way as well.

[@FiercesomestDragon]

Exactly what I needed to see. My '99 Accord's AC started clicking after I heard what I thought was something fall in last week. Found 23 years' worth of junk in there, or else one very intrepid rat's nest. Thanks for the help!

[@3332301]

Thank you very much guys. All it took is about 10 minutes, and I saved $90 of labour cost.

[@1AAuto]

Thank you for watching. 1aauto.com 888-844-3393

[@1AAuto]

Thank you for visiting our channel. There are many components that are installed by the manufacturer to get an AC system to work. You may want to see if you could find a 99 Accord in the junk yard that would fit your vehicle, and then take pictures of where everything belongs on the vehicle. Hope this helps you out.

[@1AAuto]

@m5115m Thank you for visiting. We carry all of the parts in our video's on our main website 1aauto.com

[@reaph77]

really appreciate the video. was worried it was gonna be a challenge like my older 87 accord but appears to be 1000 times easier

[@1AAuto]

@Accord9206 If there's an automatic belt tensioner on it, it could have lost some of it's retension. I would have someone check the refrigerant level in the system to see if it's low. That would cause the system to blow warm air too.

[@ThomasKulaga]

Thanks! Used a light and mirror to help find the screws, which were easier to get at with a T25. Had to use pliers to pull out the stubborn back connector. All in all, not a bad job. Ordered my part from 1AAuto and it arrived quickly.

[@1AAuto]

Thank you for your order. Have a great day! 1aauto.com 866-403-3393

[@1AAuto]

If the blower motor is bad, you would not have any air coming out; hot or cold.

[@1AAuto]

Thanks for watching. 1aauto.com 888-844-3393

[@1AAuto]

@KungFuCactus9 More than likely. We sell them for many different types of vehicles on our website 1aauto.com

[@KungFuCactus9]

mine is making a rattling noise. I think that means I need to replace it right?

[@slimshady1541]

When I turn on my heat low or high, the higher speed the more apparent it becomes, it makes a aweful loud noise and vibrates me dash is a bad blower fan causing that possibly?

[@geraldrobinson8891]

Thanks for the video ,, someone was trying to charge me $80 to change this blower ...

[@m5115m]

keep up the good work it's really a nice channel i hope in the future it get alot of views and subscribers !

[@masonrhoades6520]

Thank you for this video. Just changed it on mine and man where those couplers stuck on

[@gracekelley2962]

My air recirculation is not working I’ve looked everywhere any help?

[@artiegray8195]

8mm or T25??? Which one is it??

[@handlehouseflamingknights6913]

Very good video. Thank u

[@bandit36goingon37]

Your description says T15 torx bit, but in the video, you said T25...Which is it?

[@imcalebfr]

go find out

[@MrJrocc09]

That cool now I know what to do thanks you help me a lot

[@Pizzo27]

Thanks for this, very helpful

[@nursesexi2012]

Thanks so much this video helped a lot.

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@jsollien127]

Thanks for the second time. The darn chipmunk built a nest in the fan...again.

[@repeatman]

im sitting in my car right now which the blower motor is dieing. thought i had more work to do. thanks for the video!

[@1AAuto]

+repeatman Thank you for watching. Please let us know how the repair comes out! For anyone else needing to replace the blower motor with fan cage, 1A Auto offers the part here: www.1aauto.com/1A/BlowerMotor/Honda/Accord/1AHCX00020?KZbin&CTA%20Comment&ATony

[@repeatman]

1A Auto Parts 8 months later i finally did it. lol! works perfect now!

[@italianozuzu1232]

Mine was full of leaves thanks I fix it ! I just cleaned and the sound went away

[@1AAuto]

+Gato Minino Thanks for checking us out! 1AAuto.com

[@dalecharlesphoto]

terrific, thanks

[@davidminer7388]

Thanks!

[@MrBellvsnaruto123]

Where is the heater core located on a 1997 Honda acord

[@MrToan001]

can you show me video how to put A/C into honda accord 1999? pleasee...

[@izacsanchez7695]

What do you do if those screws happen to be rounded out

[@1AAuto]

+Izac Sanchez If the screw is rounded out, any local auto part store would carry a specialty socket to remove. The other option you have is to take a pair of vice grips if there is enough room and lock them into place around the screw to start the removal. It is highly recommended to replace the screw once you take it out. 1aauto.com

[@rogermartinez9778]

Would this cause my climate controls to turn on heater after car is off?

[@daironification]

It shouldn't

[@sarmadgill1751]

Does anyone know where the blend door actuator is located on the 2002 Honda Accord?

[@xm1193]

Behind the glove box on top of the air filter housing. Recirc door is there too.

[@hayksamvelyan]

I can't thank you enough.

[@shawn08ize]

Would this blower make the ac nit blow cold???