How to replace BMW's Old Rusty Brake Dust Shield without removing Hub/Bearing assembly on a car

How to replace old rusty brak dust shield on BMW e36
Wera Zyklop Ratchet Review: • Wera Zyklop speed rat...
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done at your own risk. I will not be held liable for any injury to yourself or others or damage to your firearms or any equipment resulting from attempting anything shown in any videos.

[@sotys7669]

Adjusting handbrake with drum off is the master genius

[@carrepairandtoolsvideos]

Not really bro 😃

[@clusternova6278]

Very nice. Saves me a buck, some pain and a lot of trouble Thank you sir!

[@carrepairandtoolsvideos]

I am glad it helped you and thanks for your feedback.

[@christiann7320]

Damn. I didnt think abojt modifying my stock part like in the video with a nut and bolt. Could have saved me buying the new dustshield. But it was 10€ so meh..

[@carrepairandtoolsvideos]

Lolzzz i could feel it

[@adnanfile]

Thanx for the video. keep up the good work.

[@carrepairandtoolsvideos]

Thanks yara

[@wilmaj01]

The title of this video should be "How to save effort and energy installing an automotive part, by using extra effort and energy in modifying said automotive part." 😂

[@carrepairandtoolsvideos]

I have to admit that I couldn't agree more 🤣

[@gamingandtech2834]

It helped me Thanks alot 👍

[@carrepairandtoolsvideos]

Glad it helped you.

[@Nico-bz6tg]

Thx for the help

[@carrepairandtoolsvideos]

You are welcome 👍

[@williamekman983]

Great video!

[@carrepairandtoolsvideos]

Tack

[@musiclyricsbyawa1s188]

Helpfull...tnkx

[@carrepairandtoolsvideos]

Thanks

[@radioactivepotato2068]

I watched the whole thing. Good video. Jumped up ready to steam into it and got stuck at 'locate wheel locking nut adapter'. Now sat down, eating a sandwich.

[@carrepairandtoolsvideos]

Hahhahaha. Things like this happen to alot too.

[@warangtipasci8983]

Thanks for the vdo,

[@carrepairandtoolsvideos]

Thanks bro!

[@Sokrates66]

You could avoid the hazzle by simply loosening the hub with a 30 socket.

[@carrepairandtoolsvideos]

Loosening the hub means changing to the new bearing. Thats hell of the job. Soon that video will come too with removing the hub.

[@Sokrates66]

@@carrepairandtoolsvideos No problem, i did it today, takes no time at all when you alredy loosening everything else to change the splash shield.

[@carrepairandtoolsvideos]

@@Sokrates66 Cheers :)

[@user-zi1sr7zc1p]

Hi I've the 2008 bmw 320d E91 and wonder if the dust shield is separate fron the e brake supporting ring? I bought a new dyst shield but there were no holes for the brake shoe pins?

[@carrepairandtoolsvideos]

There are 4 holes and small 2 holes will support the pin on the dust shield.

[@erikglasberg4581]

10/10!

[@carrepairandtoolsvideos]

Thanks

[@MadeInMinecraft]

Omg! I have the 166pcs Kamasa tools set! Not seen a Kamasa ratchet in a video before! I know you’ve had a lot of different ratchets, including Snap-On, Stahlwille, Hazet? How do you think the Kamasa tools stack up? I love the small foot print of the head and the narrow neck.

[@carrepairandtoolsvideos]

Actually, I am planning to make a review about Kamasa tools soon. I have the same 166pcs set and been using this set for many years. Never broke single socket or ratchet yet. Kamasa Ratchets have small heads and very strong. I would rate Kamasa ratchets in the same league as Hazet, Snap-on, Stahlwille etc. One of the best tool kits in my opinion.

[@MadeInMinecraft]

@@carrepairandtoolsvideos Thanks for your opinion! Would really like a review of your long term use of the Kamasa Tools set 👌🏻

[@jasulatvala9450]

Nice work!

[@carrepairandtoolsvideos]

Kiitos

[@DexStory04]

Thank You!

[@carrepairandtoolsvideos]

You are welcome

[@akashhussain4568]

Hi, I am wondering that if that plate is necessary, because I went to the mechanic as the car was making noises from the behind weels, he told me that it's because of these plates, they're broken, he said that those aren't necessary and he removed them. Now the car is making noises while driving, I don't know if it's becuse of them plate or it's something else. I also had to change the brake pads of the front tyres and brake hose from the back tyres, it might also be because the mechanic didn't do his job right, while removing and putting back the brake hose or the tyre... Does anybody know what it could be? The mechanic now is blaming me that the car was like this before he touched anything.

[@carrepairandtoolsvideos]

If the car was making noises before mechanic touched it then he should have fixed it and this what you wanted as per your comment. Now back to the noises, is hard to tell based on what you said but I try. there could be many reasons. First make sure if its coming from wheel or some other parts like exhaust etc. If its coming from the wheel, then check if it makes more noises when braking. if it is so, then it could be worn out brake pads or disc or rust is build up where brake pads are mounted. These sounds are like squeaking sound. if the noise is consistent braking or not, then it could wheel bearing. Now if there is no dust plate, then it could be that dust, dirt, or small stone stuck between brake pads and the disc. I would say those plates important. check the brake disc if these warped (shiny and circle marks on the disc). Check if brake caliper pins are moving freely and are not seized. check if some bolts are loosen. It could be the reason since dust shield (Plate) was rotten and some rusty metal part might get into Drum brake (Parking/E-brake). Depending on your DIY knowledge, you can diagnose yourself if you keep all these points in your mind. Try to remove the wheels check again let me know what you have observed then I will explain further based what you observed.

[@hitom43]

Doesn't the shoes rub on the disc? How did you adjust without the brake disc on?

[@carrepairandtoolsvideos]

I ajdusted later on after the disc insllation!

[@simonlm1117]

Great vid 😘

[@carrepairandtoolsvideos]

Thanks bro

[@ztechyoutuber2913]

Nice work 💥

[@carrepairandtoolsvideos]

Thanks

[@carrepairandtoolsvideos]

Thanks

[@robertwootton2161]

Why do people always use a claw hammer? That's a carpenters tool. An engineers ball pein would be more suitable preferably a bronze one for the impact driver

[@carrepairandtoolsvideos]

If I remember correctly, i did not had other hammer with me that moment. But you are right bronze hammer should be used with impact driver. Thanks for sharing your thoughts.

[@FaKaVJB]

Hell ye!

[@carrepairandtoolsvideos]

Tack

[@a1xsmoke]

i was quoted for a 5hour job to replace one rear dusk brake shield ,is that really how long it takes from a bmw specialist ?

[@carrepairandtoolsvideos]

In order to replace the dust shield in a proper way is to remove the wheel bearing assembly. In this case it might take 3 to 5 hours. They will charge you for bearing too. But this is not good idea since you can replace the dust shield same way as I did. Just cut the shield leaving screw holes and install it. It will take max 2 hours and you can do it yourself if you follow my video and save some bucks!

[@chowtrap934]

Should be almost the same for e46 2003 right ?

[@carrepairandtoolsvideos]

Yes, its almost the same

[@chowtrap934]

@@carrepairandtoolsvideos thanks dude.

[@carrepairandtoolsvideos]

@@chowtrap934 you are welcome

[@SERP92_]

what size was the bolt at 12:9?

[@carrepairandtoolsvideos]

I think it was 16 mm bolt if I remember correctly.

[@SERP92_]

@@carrepairandtoolsvideos thanks! I'm putting dual calipers on my car and that bolt is so rusty I don't know if it's 15mm or 16mm lol, I don't know what to do

[@noname-fw2jw]

Gg for cut 💪💪

[@carrepairandtoolsvideos]

Thanks bro

[@user-tx6ur8vp5x]

Wrong side :-) I did this mistake too .

[@carrepairandtoolsvideos]

Yeah, i think you are right it was wrong side. Thanks for your feed back.

[@sigge7727]

I cant stop watching this shit😍😍😍

[@carrepairandtoolsvideos]

Satana 😂

[@aqib2000]

You didn’t show how to cut the fucking disc shield which is the main part

[@Shvhxli]

its in the first 30 seconds of the video