How to Replace Camshaft Angle Position Sensor 02-06 Nissan Altima L4 2.5L

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@Floornug]

Literally the easiest thing I’ve ever fixed! Don’t be discouraged and go to a shop, this took me a total of 3 minutes

[@1AAuto]

+Garrett Rowley Thanks for checking us out!

[@3bs1love]

Seems simple enough. Thanks for this video. 05 Altima 2.5S

[@roadstar499]

wow..i bought my car used just noticed oil leak where sensor is..... just ordered new part...it has been running pretty good,but glad i caught this issue.. update the senor had no 0-ring on it....so i found one that seems to work at stopping the leak. so far so good...

[@craigsizemore2289]

thank you , my car starts now

[@davidh4921]

Followed your steps and it worked great. Hopefully my P0340 Engine code will stay away now.

[@Ronin0179]

But there's 2 cam position sensors on that car??.... (seemed noteworthy)

[@marcoflagg6601]

Appreciate y'all 👏🏿👍🏿

[@user-jd4kp3lp9r]

Am workig on w006 altima.intially I had crank sensor code.i replaced crank sensor with after market one still car cranks but no start any help will be appreciated

[@IT-IT07]

Thank you, sir! This video is very helpful!

[@nizmo90]

Great video . Have a Altima 2.5l parts comes in tomorrow gonna change cam and crankshaft sensors . Love your Altima videos always watch them . Next I have to change my rotors and brake pads already watched the video and ready to tackle it lol .

[@1AAuto]

+isaiah orot Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@roadstar499]

this job is a lot easier removing air intake..it allow you to clean any oil leak mess better also... i also find it much easier to remove sensor than remove connector... i had a lot of oil leaking from mine...who ever removed it last time installed mine without O ring....i cleaned mess and found an o ring i had lieing around and it seems to have fixed leak... i will check again after i drive car 100 plus miles and see if it is still all good...

[@0Fresco7]

Hello. So what is the difference between the Camshaft position sensor and Crankshaft sensor?

[@1AAuto]

+0Fresco7 The camshaft position sensor will sense the position of the camshaft, and the crankshaft position sensor senses the position of the crankshaft to ensure the engine is running properly.

[@0Fresco7]

@@1AAuto So i have 1 code popping up and that is p0725. Would that be the camshaft or crankshaft sensor?

[@brandonbeavers4668]

For a 2005 nissan altima they are the same exact part, just in different locations.

[@Sarah-jz6qd]

@@0Fresco7 Any answer for this? I have the same code coming up, did it end up being the cam or crank sensor?

[@calixxlivin]

I have an 06 3.5 just bought it I have the code for camshaft sensor bank 2 is this the same one?

[@Wanderingviewer]

is there only one for this vehicle model?

[@salvadormoran8364]

Cam and a crank

[@timothytremblay7763]

Thanks for this video

[@glitterpixie1015]

Thank you so much!!✨💜wonderful video..so easy to follow!

[@Tzom]

Is this the same for Nissan maxima?

[@SeanA88]

No. Maxima has the v6 vq35de and this video's the 2.5 4 cylinder qr25de

[@EZFeTTy]

Is THERE A DIFFERENCE BETWEEN CAMSHAFT POSITION SENSOR AND CAMSHAFT ANGLE SENSOR AND CRANKSHAFT POSITION SENSOR?????

[@elijahjones8351]

They’re essentially the same part . But they are in different positions and do different things . The crankshaft sensor positions the crankshaft and is under the throttle body , the camshaft is near the top of the engine like in this video and positions the camshaft . Camshaft creates power , crankshaft delivers the power

[@orangelabella]

How do you know if you need to change it?

[@elmurr4822]

Orange Labella the car is hard to start or doesn't start sometimes.. The car will throw the cam shaft code when it gets really bad

[@josehumberto3954]

Eso es todo campeon justo lo que necesitaba gracias por compartir.

[@1AAuto]

+Jose Humberto Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@emilioarcosr2720]

Do you have the cam sensor of neon 1999

[@1AAuto]

+Gamma Izta Thanks for watching! Here is a link to the camshaft position sensors we carry for a 1999 Neon: www.1aauto.com/search?q=camshaft&year=1999&model=84

[@fernandomoreno3572]

I swapped it out but it still bring the code up for that sensor. Followed wiring all the way no exposed wires.

[@1AAuto]

+Fernando Moreno We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@doctorphil0078]

Much appreciated!

[@megaman2147]

You calling it a camshaft position angle sensor, is this still considered a camshaft sensor?

[@1AAuto]

+Saul Hernandez Yes, it is a camshaft position sensor.

[@megaman2147]

@@1AAuto thank you

[@MyThoughtzAndOpinionz]

I have 06’ Altima 3.5 SE-R. I’m having a hard time locating the darn thing. My engine is different

[@kamontjohnson3121]

Why won’t my car start after replacing the new one

[@eimblessed6012]

Ok I can do that. Thanks

[@damiansvlogs]

I replaced it and the car wouldn’t start. I put back the old ones and it start back up. What can be the reason for this?

[@bruhbruh5916]

I ripped the sensor out of rage

[@GloriaLopez-ug1bn]

Translate to Spanish