How to Replace Car Speakers (Toyota Sequoia)

[@jason01095]

Thanks for the video - learned a few things about removing that door panel and how "extra special" the speaker situation is in my '06 Tundra. It would be cool if you would list the information on the parts you ended up going with in this guide? Replacement speaker, adapter ring, etc. Many thanks for taking the time to put this together!

[@chrisday4434]

What a great video ! My daughter took one door and I took the other and we had a race. She beat me, but this video made it easy. Thanks !

[@martingoodman3300]

Thank you for a very helpful video. I'd say you covered about 87% to 93% of the things I needed to know to replace the speakers in my 2004 Toyota Sequoia, whose bass had been blowing me a raspberry for quite a wile. Really made the job a lot easier. A LOT. There were a few gotchas you didn't cover... like fishing a few errant push in secure red blobs out from the car door and re-installing them in the panel before re-attaching the panel. The electrical part has its own oddities depending on what speakers you use, but I'm a long time electronics and radio tinkerer, so that turned out to be no problem at all.. I cut out, then soldered to the new speaker, the old Toyota connector from the old speakers. Worked great. Ada;tors for any of zillions of coaxial 6.5 in speakers are inexpensively avialable on eBay, to fit the nastily weird "proprietary" Toyota mounting hold and screw positions. Again... THANK you... you gave me the confidence to attack the speakers and, dsspite some modest (expected) small number of gotchas, made things go quite smootly.

[@Tcivan]

This was great thanks! I definitely have to change out my blown Sequoia speakers....

[@crazygamer-qr1or]

Can plz put the link where u bought the speakers and information of the size ...

[@RooskiRooski0]

What a lovely 2007 Toyota Sequoia

[@dhandzlik]

Thanks for the video! Very informative and entertaining. Keep ‘em coming!

[@kevinzito3612]

The before is literally how my sequoia sounds right now that shit made me laugh 🤣 thanks for the tutorial bro

[@csmooney]

JBL system speakers in the 2007 Toyota Sequoia ave 2 ohms of impedance. Aftermarket speakers are typically 4 ohms. How did you address this?

[@FarAboveDaCloudz]

He didn't...because he has no concept of impedance, crossovers, or speaker mechanics.

[@csmooney]

@@FarAboveDaCloudz Turns out the cones of my speakers had simply separated and i was able to glue them back to the rim.

[@badboy8739]

installing a 4 ohm speaker will do no harm to the jbl amplifier, higher impedance less strain on the amp, so its completely fine

[@kieranc6008]

@@badboy8739 It will result in significantly lower volume though. Might be able to compensate with balance/fade from the head unit. But the speakers he used for replacement are 2ohm woofers.

[@Goosemanzero]

Disclaimers: simple if you have the right tools here how I did it. Take off speaker leave plastic housing on the door .. angle grind OFF the speaker basket. Your left with a round OEM adapter . Line up speaker to what you angle grinded off Drill holes for mounting, tighten with screw and nuts. Wire and You should end up with an OEM adapter that bolts up. Speakers I used $55 "Powerbass L2-700" on a 2004 JBL limited sequoia system

[@JonG-BVBIAGP]

What about the smaller speaker? Does that need to be replaced too, and if so which speaker did you use?

[@DirtyGreens]

Just get a set that has that installed in the speakers

[@Rick-ho2ci]

Why did you remove the 2.5 inch speaker next to the 7 inch woofer ! That speaker adds highs and is connected separately to the factory amp !

[@bryanbocanegra2968]

Where did you get the bracket adapter my 03 sequoia only had the mount for 7 speaker

[@outandabout1046]

Good stuff, i just upgraded my sequoia speakers looking at your video. 👍

[@jmartinson100]

So what wires from the old wiring set up are the positive and the ground? Looks like you are connecting to the red and yellow? Does anyone know exactly what wiring harness can be used? I've looked online and it seems like metra 72-9301 but I reviewer said it did not work on their 2002 toyota sequoia.

[@RalphMofoFreeman]

I have the same question so if you figured it out

[@DavionWitherspoon]

Are you able to tell me what metra speaker adapter you used ? There is alot of reviews that are saying the recommended fits in amazon and crutchfield are wrong thank you for any help

[@amanmalhotra4398]

Hi Do you know the location of the subwoofer of 2007 toyota sequioa. Thanks

[@a_aronhdtech]

Did you ever figure this out? I'd love to know.

[@kieranc6008]

@@a_aronhdtech the speaker he replaced IS the subwoofer. One in each door. Both are 7" woofers. I don't think there's a separate sub.

[@SirMixalot5000]

@@kieranc6008 That’s incorrect, the guy in the video replaced the mid-range side door speakers which range from 4-7 inches (7 inches in this sequoia). Speakers aren’t classified as subwoofers until they hit 8 inches and bigger. This sequoia has 4 mid-range speakers (1 on each door) and 4 tweeters (2 in the front of the car next to the window, 1 on each side, and there’s a 2.25 inch tweeter next to the side door speakers on each side). These Sequoias don’t have a stock subwoofer installed.

[@OZGuate]

You earn your like 👍; thank you!

[@windy619]

Love the ending

[@WOWDOWN]

Nice video! At 3:38 how can Idisconnect the electrical connector with out cutting it? I bought a repair kit from simply speakers that remedy’s the decaying foam to revitalize the stock jbl speakers but I can’t get that bloody clip off. Thanks

[@stevensurman6365]

There's a little spring loaded locking tab that you have to lift up slightly, then you pull the harness off the blades. Just did this yesterday. Good luck!

[@devonaj9473]

Dude you are the best!

[@dma654]

"Ask me how I know". Lol! Story of my life I tell you! What brand of speakers did you use and do I need to replace that little speaker next to it?

[@SamuelReece-i5g]

Nice

[@EliteNK]

Where would I buy the adapter for the stupid Toyota executive with at 3:49?

[@Erenaquino]

Love this vid!!!!

[@FantaconeBoxWorksCBG]

Huh, no links or even mention of what you used?

[@daviddru942]

Blown speakers? Do you know what that means? 99% of the time now that the speakers are 15 years old the surrounds foam has dried out and coming apart. The speaker isn't BLOWN! Now if you kept cranking up the volume once it started rattling maybe you did damage it beyond repair. But! but! These are easily fixed with a new surround foam. NO big deal. Just saying.

[@Nacturnal702]

this is a old video,, but i took entire jbl audio out to garbage,, replaced with hertz mids and tweeters , with skar audio subs and amplifiers, with and alpine ilx w650 sound amazing but 2 days of removing and figuring out wires

[@dawnabrownturris55]

How do you change the 2ohm crap stock to a 4ohm great The rear speakers were replaxed with 4ohm when i got it and they were so quiet and now im down to the last fraping drivers side speaker Do i need to change the speaker and my husband said theors a cannon some were in the truck he dosent know where Cant fined any thing on line even for rear speakers just fronts Ive rewired my hinda civic years ago before i fell il lust with my toyota sequioa buts its a 2001 and needs some help We've reaplaced the guts in the trunk hatch 2 wice and got a hole new door it always kinda works for a week or two then stuck shut Cant even replace my tail light as it dosent open But man driving with no tunes sucks Cant function i got 6 kids and 3 rows of seats now minni van for me i need 4x4 I need good music help a mom out !! I need dat bass!! 🔊

[@jaydepta5417]

You need to read more books with proper grammar -love Caden

[@troyladoux1953]

Cool intro.

[@RCRobi-fh4lw]

You didnt show us the wiring/adapter fitting dear😳

[@ihaulag]

The "before and after" demo probably would have been more dramatic "before" you put the door panel back on...just sayin'.

[@windy619]

Only tip for video don’t take 90 seconds to Get to the good stuff. I skipped the whole intro nobody cares. Otherwise thanks good video !

[@stateboy80892]

Took my door panel off to deal with the window squeaking when rolling it down and found my speaker torn lol yahh

[@2hunnedproof247]

I was thinking of doing this but that’s too much work lol

[@shaneevans1873]

Wow! Realllllllly!!! So apparently you don’t care how your Spkrs ( MIDS ) Sound. The MID isn’t completely sealed in the mounting hole ( A GAP OF OVER HALF OF THE SPKR ). Not to mention you have the tweeter mounted in the factory location ( The factory amp has a crossover in it, so you’ll be playing lower frequency’s to your new tweeter ) Meaning you’ll end up eventually having it go bad. My recommendation, take it to the professional car audio shop. Pay them to install the Spkrs correctly and stop posting videos on how to install spkrs.When you obviously have no understanding of how Spkrs are designed or how to install them. That is all.

[@rci30]

Settle down, Nerd. Folks can do whatever they want. Go watch another video and find happiness.

[@kellybrown8234]

Hey Shane. I just paid a lot of money to have my speakers replaced. They said they only had the bigger speaker and the tweeter up at the window in stock and that not installing that mid speaker should make that much of a difference. All I know is that it sure seems like the old stock stereo put out much more sound than this new Pioneer. You mentioned a "factory amp", could they have jacked with that? I just figured after $1000 it should sound markedly better and it doesn't. Just thought I'd ask you.

[@LukeAMcDowell]

@@kellybrown8234 there are 2 install kits that can be used. The cheap one bypasses the factory amp. The more expensive one uses the amp. I bet they saved $10 and bypassed your amp. Take it back. Make them do it right. You spent too much money for that.

[@FarAboveDaCloudz]

Hey Shane..I'm glad that you posted this. This guy has no concept of impedance, crossovers and sound dynamics. I'm a pro installer and this made my head 🤯

[@shaneevans1873]

@@FarAboveDaCloudz exactly!! I’ve been in the industry for over 20 yrs and when you get this kind videos posted. It makes you go 🤯 and when people go to KZbin and see these videos. They are like ( Oh that’s so easy. Why pay a professional installer ( a shop ) to do this. I can do a better job. The guys ( installer’s ) I work with feel the same way as you do. Keep up the Good Fight.

[@obguy99]

2.5 ohm woofer. Yuk. Uncommon. I'm replacing with 4 ohm speakers. Probably will need more volume etc. We'll see

[@marbinbarrios5866]

eeewww that gap bro wtf

[@CosmicMomentumX]

:)