How to replace channel faders on an Allen and Heath Xone 62 DJ Mixer

[@Dav1072]

Changed mine today thanks to this video.

[@Emontop1]

Thank you so much for the tips and good luck for everything. Cheers.

[@Toshminosh]

Sorted mine out, thanks (just swapped a fader from channel 1 which I never use anyway)

[@felipergua]

thats a great idea!!!!!

[@user-uh2cr9so8l]

Thanks for the useful video! Can anyone recommend if I can use a xone 92 fader in a xone 62? The xone 62 fader caps are not 'dj' enough for me!

[@bradslawson6613]

Thanks for the info. How is the best way to hook up a powered subwoofer using this particular mixer. Is there a way to control the sub seperately using one of the knobs?

[@it123123123]

You could use the mono out to feed your subwoofer, which follows the volume of the main mix output - see the manual at www.allen-heath.com/media/1617.pdf for full details. For better audio quality, I'd recommend using an external crossover such as Behringer CX3400 Super X Pro V2 for more fine-grained control of the crossover frequency and gain.

[@simoncross40K]

I have a dead left channel, booth audio and main audio. very odd what do i need to replace? is it even possible? Thanks

[@jimcairns5733]

Struggling to remove top panel on xone32. I’ve remove same screws as come 62 but cover doesn’t want to lift off, any ideas?

[@robimess]

thanks a lot for this video. im using an xone 464 now with a broken fader. xone 464 and 62 are similar right? i mean, i will need the same tools (precision screwdrivers) to open my mixer?

[@it123123123]

+robimess I can't guarantee it but they are from the same family so I'd be surprised if they are different

[@casualfatality2964]

Can't seem to remove the top part when I undo the first 8 screws on my xone 42 (dark grey more recent model). The bottom half, e.g closest to faders comes up fine but the top closest to gains won't budge. Any tips?

[@arvidborgo1704]

Some models including the 42 also have five screws on the upper front plate, located between the channels' phono/line inputs, that need to be unscrewed in order to take it apart. Be careful not to hit the electrical components when doing so.

[@damighiaccio]

Is it possible to damage something in the on/off panel by just reconnecting those white striped with pins (the long one)? I followed these step and replaced the faders really easily, put everything back together and now the unit won't turn on....

[@etiennedreillard1633]

hey... same problem here. did you find the issue ?

[@damighiaccio]

@@etiennedreillard1633 mine turned out to be a stupid mistake, I had just attached it the other way round. Easy fix hope it's the same for you

[@Dav1072]

Thank you. What's the 2 screwdrivers we would require called?

[@fedek.a.]

do you know the resitence of these faders?

[@mchonnyable]

hello - I hope someone will see this - is it a reasonable idea to remove the mic faders (far left) to replace one of 4 main faders?

[@CosticaKristianDiVogli]

Hi! Can I replace the 62 faders with 92 xone faders?

[@it123123123]

I don't know, but if you find out, comment back here :)

[@cop6307]

Could you do it??

[@CosticaKristianDiVogli]

​@@it123123123 Didn't find any vid about it.

[@CosticaKristianDiVogli]

@@cop6307 Didn't find any vid about it.

[@rokagrooveradio8429]

Ive got the xone 92 and tried changing the upfader channel and when i screw the 2 screws back up whicever way i go the channel fader will not go full length and fall short at one end , total baffling as to why its doing it, has anyone got a 92 and know the answer, seems as you can only adjust it abit by the 2 screws its daft i cant simply get the fader right

[@bendybenbenderson]

Can you confirm if this is as simple to replace a fader on a Xone: 92 mixer?

[@it123123123]

It should be the same process, although the part number for the new fader may be different

[@caximbada69]

Hello, can replace the 62 channel buttons, by the xone 92 buttons?

[@it123123123]

Yes

[@omarr9091]

Does anybody know the Allen Heat code of this channel fader? Thanks in advance

[@powerboon2k]

awesome

[@donaldghazi2392]

Is this a common issue for Xone 62?

[@marcelloheico1]

thx :)

[@andreasmainzer7711]

😌 what a Challenge with Inox Srews and just two Hands to set the Screws .... if someone has a smart Hint, plz let me know .... today is October 23 2021 😂

[@karaokesontung7256]

iam Vietnamese. Please only place I sell fader qu16 :(

[@Dav1072]

Changed mine today thanks to this video.