How to replace Cherokee XJ rocker panels step by step

In this episode I show you how to replace the rockers on a Cherokee XJ with OE style replacement panels.
The paint was custom mixed by Upplands Bilfärg AB (www.ubf.se)

[@Ramblin80]

Wow. Thank you! This is the second video I've watched about replacing rocker panels. The first guy was long winded. You are straight to the point and have a good looking XJ. Thank you so much!

[@reconjeepmods3774]

@@Ramblin80 Thanks, happy you liked the video. Good luck with the rockers :)

[@projectbumblejeep4190]

Good job! If you want to do rock sliders later, you can always place them under your new rockers. I had to do this job on my Bumble Jeep. I cut mine differently and used panel adhesive with self tapping screws. At the time I did mine, I didn't have access to a good MIG welder. They are holding up well. I scuffed the new rockers with red scotch brite, wiped with thinner then painted them with POR 15 inside and out. Every spring I pressure wash and re-coat the underside to keep it fresh. This year, I got cavity spray and did the inside of the frame rails and inside of the rockers. With a 27 year old Jeep, rust is an ongoing battle. Hope yours hold up as well as mine are. God bless and stay well.

[@TheSuperduke08]

Good video, but I may have drilled out those spot welds on the a and b pillars and also along the bottom edge. Thanks for taking the time to make and share this video!

[@rocknhardspotcherokeexjres5959]

Nice work, very functional! Love that really clean XJ!

[@XSAILOR65]

Great! I hav the same ahead, green XJ 1997, but its a 2.5L gas. rockers totally toasted...The welding will be a challenge i don't weld :)

[@kennethtorreggiani3801]

Great instructional video.

[@reconjeepmods3774]

Thank you 🙏🏻

[@JadeSterling]

Great video, we'll done! I have to replace inner and outer rocker panels on mine. I used a spot weld cutter to take out the welds on the pillars and removed all of the old rocker underneath.

[@reconjeepmods3774]

Thats the best way to do it 👍🏻

[@108doublestitches]

Great video. Where did you buy the rockers? I would like to follow what you did with the same rockers but with so many sellers I don't know what I would be buying.

[@16guns]

Looks great!

[@LouieGiNYC]

Very impressive. Cheers. Also, nice shirt --- Heel Toe ---

[@reconjeepmods3774]

Thank you 😄😄

[@elgatol4203]

Awesome

[@reconjeepmods3774]

Thank you :)

[@hayzersolar]

wtf you hit me on my head be careful with that rocker

[@Gundog12]

Hej! Vart köpte du tröskeln? //Xjnoob..

[@reconjeepmods3774]

Tjena! Kommer inte riktigt ihåg men typ trodo eller AUTODOC. Rätt billiga, typ 4-500kr/st.

[@moejr14]

What welder did you use?

[@reconjeepmods3774]

Hi, I used an ESAB Rebel

[@dopeass791]

Om jeepen ska bli fin, täck för inredningen när du kapar och svetsar. Likaså fönster. Fråga mig hur jag vet.