How to Replace Corsair HS65 Ear Pad Cushions | Remove | Install | Replacement | Part | Repair

Buy a pair of replacement ear pad cushions for Corsair HS65 Here centralsound.c...
Premium XL Ear Pad Upgrade for Corsair HS50 HS60 HS70 PRO (Cooling Gel, Hybrid and Protein Leather) Buy Here centralsound.c...
Video of demo and how to Install our Premium XL Ear Pads Here • CS Cooling Gel Ear Pad...
How to Install our Premium OEM Type Ear Pads Here : • How to Replace Earpads...
Order our Premium OEM Type Ear Pads Here: centralsound.c...
How to Replace Ear Pad Cushion on Corsair HS80 • How to Replace Corsair...
Buy our Upgraded Ear Pads for Corsair HS80 Here: centralsound.c...
Full Range of our Parts for Corsair Headsets Here : centralsound.c...

[@gibidroidz]

This headphone was designed by satan. I thought to myself why did they glued the earpads to the main headphone only to find out there's a plastic frame which it is attached to, that is LOCKED in the main headphone. You'd have to twist it like a madman. It's not just stubborn, it's fricking hardddd man. Tip to whoever will see this in the future, if you have rubber bands, put lots of them in the plastic area if you also pulled out the ear cushion and got left with the plastic frame. And no, it doesn't end there, locking up the replacement pads are frickin hard too altho easier than removing them.

[@tyfly86]

dropped a like, for the life of me couldnt figure this out lol

[@dank-dex5596]

I was looking like crazy for this tutorial, THANK YOU SO MUCH!!

[@CentralSound]

Glad I could help!

[@nightmisterio]

Thanks, I had to yank it into place, was almost thinking it was the wrong version.

[@WrathDrago]

The PU leather part came off the plastic part that you twist off of the headphones, for me. Is it possible to to glue it back onto the plastic frame that you twist off? What glue should I use?

[@TheChristianJohns]

this helped me with something else, I have a different model headset and couldn't quite figure out why my left earphone get falling off the band and I couldn't find out how to open up the headset which this showed me how and it turns out there was a loose screw that holds in on that need a good tighten.

[@srq_Tom]

The stock ear pads are glued to a plastic frame. In my case the adhesive was so worn down that the stock pads just separated from the frame. Took me a minute to figure out that I had to twist that frame off. The replacement pads weren't that hard to twist into place, but I am pretty strong. The left one was harder due to microphone being on that side, but i got it into place. It's a bit of work, but much better and cheaper than buying a whole new headset just because the pads wore out.

[@robinsonglen435]

I’m grateful for your help

[@thainghi6753]

Thank you very much!!! This video is extremely helpful!!

[@CentralSound]

Glad it was helpful!

[@mattpc]

Thanks, I almost break them.

[@albertoacinfalcon7126]

Muchas gracias por el video me acabas de salvar!❤

[@Greenalex89]

The leathery part completely came off (through totally normal use) while the panel it should be attached to stayed on the headset..I think they are glued to the plastic and if came off within only a few months. This is the most expensive headset I bought and it was the best I ever bought, but now its just another disappointment.. 😫

[@CentralSound]

Hmmm. The replacement ear pads are not glued in. The plastic mounting part of the replacement ear pad may still be attached to the ear cup. If that’s the case you can try to remove that part and install a fresh new set of ear pads. Watch the video 😃

[@ethan.9425]

i didnt want to buy a new ear cup so i hot glued the one I had that came off

[@petrovicsadrian3433]

Thank you, you godsent!

[@yuchinchen4395]

thanks for the video. pretty helpful

[@sarsuje]

my hs65 have been lying around for a couple months coming here just to fix it and ordering parts

[@N0rT3C]

God bless you dude ❤

[@CentralSound]

You too!

[@Eclipsedenoche]

thank u man

[@CentralSound]

Happy to help

[@naven7199]

why my headset is very difficult to rotate, is it have technical to remove them ?

[@CentralSound]

Hello and thanks for your question. These ear pads can be a bit difficult the first time removing them. You most likely need to apply more strength when turning them.

[@JatinPlaysYT]

I have hs55 surround Model is it works on those as well?

[@CentralSound]

Yes

[@morrisgibbs19]

does this also applies to corsair hs55?

[@CentralSound]

Yes it does!

[@tornadotaylor8956]

stubborn? mine just came off from use

[@superagentLe_vrai]

That help me a lote

[@CentralSound]

Glad it helped!

[@Kweenie-wz7fx]

Can you please do the headpad replacement as well?