How to Replace Driver Side Door Lock Actuator And Latch 2006-2013 Chevrolet Impala

Buy Now!
New Door Lock Actuator & Integrated Latch from 1AAuto.com 1aau.to/ia/1ADLA00193
This video shows you how to replace the lock actuator and latch on your 2006-2013 Chevrolet Impala. Your vehicle door stuck and won’t open? Maybe it won’t close and stay shut? Either way, you’ve got an inconvenient or dangerous situation on hand.
This process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala
Tools you will need:
• Pocket Screwdriver
• 10mm Socket 1aau.to/oa/1AXAA00017
• 7mm Socket 1aau.to/oa/1AXAA00017
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Complete Torx Bit Set 1aau.to/oa/1AXAA00008
• 1/4 Inch Ratchet 1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Duct Tape
• Safety Glasses 1aau.to/oa/1AXAA00343
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@darrylsexton9062]

After watching about 10 videos for the impala, this is the only video that I have seen so far where the person actually shows you a view of the camera inside the door so that you can see what he is actually hooking things up to. All the other videos just showed someone reaching their arm in and we were left to imagine/guess what he was doing. Great video and Great work.

[@WhipzByBlue]

This video helped me cross reference on my 2010 Chevy Malibu, which had the same setup. Found out the hard way that the “mystery mechanism” one of the rods connects to is the door lock cylinder above. Thanks 🙏🏾

[@MichaelFleegal]

I’m glad Charlie Sheen did the voice overs in this video 👍🏼

[@animalhouse985]

Perfect to follow! I was able to change it so quickly thanks to your video! Thank you so much!

[@Gueros_Garage]

You just made my life a lot easier Thank you so much

[@MrBikedrummer]

Great video. I'll be doing this door next. I started with the rear driver's side door first. That's a nightmare because the latch assembly is located high inside the door opening. I struggled with the door lock rod on that one!

[@franciscomedina654]

Nice job and explained thanx love this video 👍✌️

[@petermartell1816]

I have to make a new connection from the harness to the motor, how do I know which pin goes to what wire? I don't have the old one for reference. It's an LTZ

[@dequantaehill7822]

What does the rod hook on to 😂

[@gunrunner6578]

This is totally fake. Not a single curse word.😂