How to Replace Engine Knock Sensor 2006-2009 Mercedes-Benz E350 (3.5L V6)

Рет қаралды 6,548

Күн бұрын

Buy Now!
New Engine Knock Sensor from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new knock sensor in your 2006-2009 Mercedes-Benz E350 (3.5L V6). A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.
This repair was done on a 2008 Mercedes-Benz E350 4Matic 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Mercedes-Benz E350
2007 Mercedes-Benz E350
2008 Mercedes-Benz E350
2009 Mercedes-Benz E350
Tools you will need:
• Flat Blade Screwdriver trq.video/obws...
• Pry Bar trq.video/o2V-...
• 10mm Wrench trq.video/o5p-...
• Needle nose pliers trq.video/oGr-...
• Needle nose pliers trq.video/oGr-...
• Wire Cutters
• E10 Socket
• T30 Socket
• Ratchet trq.video/obRA...
• Torque Wrench trq.video/oaU7...
• Brake Parts Cleaner
• Cloth Rags trq.video/oHU-...
• Gloves trq.video/oaA7...
• Safety Glasses
• Wire Ties
• Pick trq.video/oUU-...
Subscribe: / @trq
Check out our playlist:
Mercedes Benz E350 3rd Generation 2006-2009: • Mercedes Benz E350 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.