How to Replace EVAP Core 2007-2013 Chevrolet Silverado

Buy Now!
New A/C Evaporator from 1AAuto.com 1aau.to/ia/1AACC00495
This video shows you how to install an EVAP core on your 2007-2013 Chevrolet Silverado.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa6N/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa6N/1AXAA00013
• 10mm Wrench 1aau.to/oNr/1AXAA00010
• 13mm Wrench 1aau.to/oNr/1AXAA00010
• 15mm Wrench 1aau.to/oNr/1AXAA00010
• 10mm Socket 1aau.to/oaRq/1AXAA00017
• 13mm Socket 1aau.to/oa89/1AXAA00015
• 15mm Socket 1aau.to/oa89/1AXAA00015
• 5.5mm socket
• 7mm Socket 1aau.to/oaRq/1AXAA00017
• Heater Hose Removal Tool
• Trim Tool Set 1aau.to/oXS/1AXXX00006
• Side Cutters
• E14 Socket
• E18 Inverted Torx Socket
• T50 Socket 1aau.to/oBj/1AXAA00008
• Ratchet 1aau.to/objT/1AXAA00016
• Socket Extensions 1aau.to/oa89/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oapZ/1AXAA00044
• Drill
• Drill Bit Set 1aau.to/oaj/1AXAA00141
• Gloves 1aau.to/oEr/1AXSS00048
• Safety Glasses 1aau.to/ox8/1AXAA00343
• Wire Ties
• Magnet - Extendable
• Pick 1aau.to/oFN/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video

[@oldsharkbythesea3962]

Way too much work for something they could have provided an access panel for to allow for repairs IMO. I don't have the patience to go through all of this 'disassemble car', replace part, 'reassemble car' process. I'm just going to cut a hole, pull the old one out, slap in a new one, epoxy the piece I cut out back in place and call it a day. - I mean my Tahoe is a 2007, so it's just not worth the trouble to go through a full 'do it right' process like this. Maybe if it were newer I'd think about it, but it's a LOT of work to get to that one part!

[@aneyesky]

You know its going to be a pain, when he starts with the seatbelt removal for an evap core

[@ryanstensrud9740]

need a evap done. watched this and i think i will go no ac for now

[@michaelgreen8930]

No thank you

[@thhall459]

I’m getting progressively more nauseated the longer I watch this.

[@SDPP992]

Goodlord.. i think im selling my truck as is 😂

[@thatguywillt]

Watching this for my '07 Suburban. I mean goddamn. I thought my Fox Mustang was bad...

[@michaelgreen3224]

What’s the actual time it took to do this. Anyone whose done it.

[@bretroberts5013]

Brilliant GM Engineering 😂

[@bobbyjj5372]

Is this for real ? 😅 And lastly you have to flip the entire car over by yourself to reach it 😅

[@franklinrav5935]

Great video step by step. For anyone that doesn’t have any knowledge on how to do this. Great job

[@jakebrake7417]

Thanks for all the great step by step detail. Just had to do this to a GMC Sierra. Your video helped make this painless!! Thank you!

[@visionarybrushstroker7694]

Done my heater core and evaporator thanks to your helpful and to the point videos.

[@Wisconsin4eyes]

What a undertaking! Thanks for the video!

[@Almightypain88]

U can cutt out the pannel under the glove box and u at the promise land easy short cut

[@tastybio584]

Thank you so much for this

[@igalaviz]

Thanks for the informative Video!

[@chadherriott116]

When you gain access to the cabin air filter compartment, is that the heater core or the evaporator that is next to it?

[@Darkfire612]

thanks for going through the reassembly too. i would've been scratching my head for a while after.