How to Replace Exhaust Manifold Catalytic Converter Assembly 2012-2016 Subaru Impreza

Shop for New Auto Parts at 1AAuto.com trq.video/c-93-aL
This video shows you how to install a new exhaust manifold catalytic converter assembly from TRQ on your 2012-2016 Subaru Impreza. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This repair was done on a 2012 Subaru Impreza Premium 2.0L Hatchback 4-Door AWD Automatic and the process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• 14mm Wrench trq.video/oVs-...
• 22mm Wrench
• 10mm Socket trq.video/oa9Y...
• 12mm Socket trq.video/obtQ...
• 14mm Deep Socket
• 14mm Socket trq.video/obtQ...
• O2 Sensor Socket
• Trim Tool Set trq.video/oaaV...
• Socket Extensions trq.video/obtQ...
• Torque Wrench trq.video/oaD7...
• Copper Anti-Seize
• Gloves trq.video/o5y-...
• Rust Penetrant
• Safety Glasses
• sanding disc
• Vise
Subscribe: / @trq
Check out our playlist:
Subaru Impreza 4th Generation 2012-2016: • Subaru Impreza 4th Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@CoderSal-XIII]

I'll be doing this next week when my parts arrive. I have a DTC P0420 so I ordered the catalytic converter assembly along with both O2 sensors. I like to replace the O2 sensors together with the catalytic converter. I love working on Subarus, they're so easy to work on as everything is so easily accessible unlike many other vehicles.

[@XqeDiosxqe]

Thank you , you made it look easy. Reality: snap bolts, break knuckles, rust falls in eyes, right and left hand bleeding. 😂

[@pincheburgues]

GREAT VIDEO THANKS

[@jylbo]

That flare nut crowfoot wrench is awesome !! also, nice video...

[@robiulalam5144]

In this video, did you install aftermarket catalytic converter?

[@jeremiahgonzales9983]

How did you clean the area that the gasket goes on?

[@shaynetaylor8185]

Why add the manifold shrouding back?

[@MariaGonzalez-ei1pv]

Awsone video...