How to replace front and rear brakes 2007 Toyota Camry

[@seki1434]

Thanks for the guide, saved me a ton of money. I hope you sleep well at night knowing that you help so much people.

[@thefarcountry]

That's going to be 8mm x 1.25 thread pitch on those rotor release bolts. Nice vid - every step and procedure explained in detail. A lot of guys never bother to explain half the stuff they're doing ... you're just left on your own to guess about it .

[@jimthecarguy]

Thanks for watching

[@SabotPottery]

Just working on my son 2007 camry here in Australia, and I don't think the rotors have ever been changed. They were giving up a good fight to get off, but after watching your video, they came off without a problem. Thanks 😊 for you very insightful and informative video. Very helpful. Regards, Paul

[@dennisarchambault5804]

Jim, thanks for all your quality videos. You have saved me so much money. Hope that finger heals ok.

[@zackb7702]

Your video was very helpful. Thanks for making videos for dudes like me that don't know very much about mechanics but want to do the work themselves to save a buck or two.

[@jimthecarguy]

I'm happy to help. Thanks for watching.

[@MortezaNurcheshmeh]

Thank you, sir! great step-by-step instruction for dummies and exactly what I needed to know to change my own Camry's brake pads. Over explanation is good in teaching those who have no experience doing this type of work. wish you could put a link for key tools and possibly quality brake pads in the description section but not a big deal. Thanks again and I subscribed.

[@ed-ou7mp]

Awesome tutorial brake job on camry. Thanks for your video. I will subsribe.

[@bobbydyne]

Hey, I just want to say thank you. The most I’ve ever done with my car is change the oil haha It took me 4 hours but it got done

[@saleemabbas2590]

HELLO JIM I WONDER WHAT IS THE SIZE OF THE BOLT TO REMOVE THE ROTORS OFF THE HUB THANK-YOU

[@krishnamatadeen8562]

Thanks for your detail instructions, I just changed the front brakes on my 2007 Camry! Great job on the video!!!

[@junzilla13]

Jim, would you use antiseize for the inside of the rotor?

[@autumnnordell1702]

Best video I’ve seen! Thank you Jim!

[@aaron-emilianoportillo1419]

Thank you for this video! I am about to buy my first car and it needs new brake pads. This is incredibly helpful!

[@jimthecarguy]

Glad it was helpful!

[@mckav2358]

Hi Jim Thanks for a very clear & comprehensive guide to doing brakes yourself Thanks again ::))

[@davidanalyst671]

Great vid. I upvoted so that next time i try to replace something on my car, I get your vids.

[@stjohnsriverrat]

Excellent video; however I always use a C clamp to compress the piston into the caliper. Very informative video.

[@TheOutwiththeold]

Yeah sorry to hear about your finger I'm in the same boat I had surgery on my right wrist I'm out of work for 3 months get better soon Jimmy

[@georgetsetsakos6088]

Thank you Mr. Jim. Very much appreciated. Happy and healthy new year to you.

[@Izm100]

You saved me from a thief michanic, he wants to charge me $399 per axle plus the parts. Just to replace the break pads. Smh I ordered the pads online and did it my self by watching your video. so thank you 🙏 I liked many of your videos and subscribed.

[@jimthecarguy]

I'm happy to help.Great job.

[@ashrafsiddiquee3190]

Hay Jim thank you soo much brother I just did the complete brake job on my camry yeasterday. I took both slider pin out at same time but didn't pay attention which one should go back to top and bottom. Your video saved my day. So thank you. I used centric rotors and ackebono pads. Thay were smoking on first test drive after the installation and not anymore but I can smell burning. Is that normal ???? Thank you Jim

[@216Booze]

New rotors come with anti-rust coating out of the box. You can simply wipe them with brake cleaner before you put them on, and you won't get the burning smell after that.

[@jk23233]

39:01, what does that little screw do? It doesn't seem to do anything!? Great video! Thanks!

[@calebinorio100]

How’s that finger doing ? And is using this much silicon bad for attracting dirt or any bad side effects . Thanks !

[@marlonmcclain5082]

When ever I push the bore back into the piston I always crack the bleeder. For two reasons makes it easier and it gets the old contaminated burnt fluid out! It's amazing how bad it is and I don't want particles push back into the brake system. Other then that great video!

[@jimthecarguy]

Thanks for watching.

[@bobsoft]

The radiator bracket bolts (12mm) will fit into the rotor to remove. Dont forget to put them back when you are done :)

[@jimthecarguy]

fred Flinstone Hahaha good point put them back when done

[@unclemunson6354]

Thank you. Saved my bacon!

[@ozzstars_cars]

Toyota's need brakes? I'm shocked. :-) Nice tutorial Jim, now I know how to do it. hehe

[@thetexaschainsaw9366]

Every car needs brakes fool

[@issavibez394]

@@thetexaschainsaw9366 hes joking lol

[@Brandon-21MN]

😂​@@issavibez394

[@alphonsotownsend8208]

Thanks, I really appreciate your time and effort.

[@comodice905]

How's the finger

[@trungphan2550]

Great vdo! Thanks so much. I just replaced the brake pads about 5 months ago but now the rotors are no good and it needs new rotors. The brake pads are still very good and the question is: Do I need to replace the brake pads to go along with the new rotors? Thanks!

[@trungphan2550]

the other question i have is: how many times can you resurface the original Toyota Camry rotors before it needs a new one?

[@trungphan2550]

if I reuse the brake pads i changed 5 months ago, do i need to resurface these brake pads?

[@jasonvierra9455]

Phenomenal video. Earned the comment and like. Watched the entire video!

[@bluesdirt5889]

Nobody lubes the parts the same way . The parts I bought recommend lubricant on the hardware ?

[@jimthecarguy]

Thanks for watching.

[@ladyyuna2000]

We have 2007 Toyota Camry LE and when I slow down before I come to complete stop it makes a Grinding Noise in the back. Could it be the brake pads that's making the noises??

[@jimthecarguy]

I would remove the drum just to take a look .

[@uawsux]

Great video absolutely very professionally done two tiny little things on the rear you did not spray brake clean on the back side of the rotor and also if you have to adjust the break you'll have to push that rubber thing inside the drum??

[@Izm100]

uawsux He did spray it in both sides. 32:36 and 39:32

[@haywardsautomotive6156]

Felt your pain Jim when you hit your finger. Take care of that finger & hope it's not broken!

[@MyBlueZed]

I love and enjoy your videos Jim but I’m getting bored of brake and oil changes. Anything more interesting to fix?

[@bobb3542]

Great video .I have a 2007 Camry that I will be doing brakes on soon.What brand of brake grease do you use?

[@issavibez394]

Is it the 4 cylinder

[@parkerhodgson4785]

Very good detailed explanations of the steps. I recommend you use chapter divisions so a viewer can skip directly to the step that's currently needed.

[@universoul_bandz44]

Thank you this was very helpful 💯🙏🏽

[@williamrodriguez2112]

Hey Sr, a coworker of mine is selling me his 2000 Pontiac Grand Prix , do you think this is a good car , in the way that don' t give you headaches , and do you think it is an easy car to do mecanic on ? , like Toyotas Camry for example where most of the parts are accesible , thanks and wait for your answer

[@JP-gc5in]

Hope your finger gets better. Great video.

[@Narutojaden]

Did he say it needed to be in neutral or not? Because I googled it and it said that it’s supposed to be so if it definitely is supposed to I feel like that should’ve been something that was said it could’ve been at the beginning and I just didn’t watch it a second time I don’t know

[@elmersalmeron4147]

Nice jobs very clear to understanding 👍👍👍👍

[@exitar33]

You're a saint, dude.

[@willielittle6021]

Great video Jim what happened to your hand I know what it's like to have to keep working thoes bills keep coming I hope you feel better be careful with that hand

[@mariobetancourt412]

What type of grease

[@TheOutwiththeold]

Better too have two 8 x 1.25 bolts, this way the rotor comes off even..

[@jimthecarguy]

TheOutwiththeold Thank you for watching

[@davidanalyst671]

Why didn't you put on the tiny little clip that goes on top of the brake pad? They usually give you the clips that sit in the caliper bracket, but theres a tiny clip that attaches to the end of the pad.

[@billmaxfield7831]

Sounds like you broke a coconut with that finger Jimmy. Good luck with it brother!

[@tritran9688]

Thanks Jim. Very detail

[@wyattoneable]

Ouch. You took a good hit on your hand. Smoke is always normal after I work on a car. LOL

[@jimthecarguy]

For sure . I lost another nail.It was not the first and I think it will not be the last.

[@uawsux]

There is no doubt you're very careful you do your due diligence you are very careful but you work like a bull in a china shop you bump into things you ain't 18 no more you better slow down and better be more careful are you going to smash some more fingers maybe a foot it's not just about the job as you get older you got to take care of yourself so why is there O-rings on the front pins only one and not anywhere else to keep the dust out?

[@DanTheManIOM]

wow, and I thought my pads were bad....

[@droskyhernandez7396]

HELLO JIM I WONDER WHAT IS THE SIZE OF THE BOLT TO REMOVE THE ROTORS OFF THE HUB THANK-YOU