This video is to show How I replace Front Differential axle seal on 2008 RAM 2500 without messing with gear backlash
Пікірлер: 83
@timothyhall9760 Жыл бұрын
That worked perfect for me. I was deployed and came back to multiple problems and this was one. Thank you
@tybrown1448 Жыл бұрын
Man I swear I came back and my truck went to shit lol
@zacharythompson2307 Жыл бұрын
Dear John, your trucks fucked!
@callsignmohas51902 ай бұрын
Hey, consider yourself lucky when I got home from Afghanistan in 2009. My wife fucking took everything for me so I didn’t even have a truck to work on.
@user-cj2xy6bx7fАй бұрын
Same and here I am watching same video…
@hateferlifeАй бұрын
@@callsignmohas5190 My condolences.
@OldNew452 жыл бұрын
Excellent video. The most complete one I've found here on KZbin.
@chadjohnson7544 Жыл бұрын
Another amazing video. Keep them comming. This guy knows his stuff
@enricomasiello77442 жыл бұрын
Outstanding Video, great explanation and details. Keep up the good work.
@Razorbackindustries5 ай бұрын
Great video. Saved me from buying some expensive tools that aren't necessary
@markgregory45102 жыл бұрын
Thanks for the video, I wouldn't of attempted this without it.
@Muotaman995810 ай бұрын
Super explanation!! And super Video Quality!! Thanks
@matthewmassengill71632 жыл бұрын
Thanks for the video saved me a bunch of time and hassel!
@cryptoviking15292 жыл бұрын
Excellent vid brother. Thanks for all the info. Keep em coming 👍
@tylerwood3992 жыл бұрын
Good video, I'll be needing to do this soon. Very informative!
@thebutcher18652 жыл бұрын
Good job mate, need to do mine and you helped me a lot.
@banghambgrch3 жыл бұрын
great job , very good explanation of the whole job . thank you very much
@scottdowney43182 жыл бұрын
Interesting, nice way to do that. Although if your going to so much trouble, do both seals, not just one of them. I suppose you would after replacing one side seal, temporarily install ring carrier, move adjuster back to original position, then unscrew other side adjuster one turn and repeat the steps again. OR you could just turn both adjusters back one turn at the beginning.
@hemi4lyfe Жыл бұрын
That's what I was thinking but I mean best to charge the customer twice when the other one goes lol
@californiakayaker Жыл бұрын
@@hemi4lyfe The other side isn't replaced at the gears. Its replaced at the disengagement box. That said, I didn't see him replace that seal.
@johnbrake1571 Жыл бұрын
@@californiakayaker on the aam axle you don't haven't a disconnect the front axle is always locked. The passenger side seal is replaced the same way as the driver side
@vapersimmonridgefarm70653 ай бұрын
Great video. Quick and informative
@boomhower1966Ай бұрын
Great video. Very well explained!
@kyawpe26832 жыл бұрын
Thank you I love this video
@jackprick97972 жыл бұрын
Excellent video. Thank you.
@calevel2 жыл бұрын
Excellent work!
@dirtydiamonddiesel59012 жыл бұрын
Good video my friend bout to do them in my 13
@kirillanderson28722 ай бұрын
This is very helpful video, thanks
@millerqbkillers147326 күн бұрын
Very informative video you’re saving a lot of guys a lot of money. Question. Where did you buy the instal tool?
@philipknight7180Ай бұрын
awesome video!
@yellow57projectxxx3 жыл бұрын
Would like to see him pull hubs like that in pa.
@jaimecoss481210 ай бұрын
Thank you appreciate it that’s a good help
@jimkillen1065 Жыл бұрын
Nice job thanks
@tree18is2 жыл бұрын
nice video my man
@silverstonespov52912 жыл бұрын
Thank you
@Freddyflintstones2 жыл бұрын
That was amazing 😉
@silverstonespov52912 жыл бұрын
Thanks
@csalinas-sf6jg11 ай бұрын
Thank you for the video. Saved me a lot of money! I know this is an older video but what brand seal do you recommend?
@silverstonespov529111 ай бұрын
We use most seals from Napa. Sometimes dealership. Quality between them not much different
@davidhigle54273 жыл бұрын
Is there a video to show how to pre load the bearings on the adjusters? I’ll be replacing the axle seals and pinion seal soon. Want to make sure I pre load correctly.
@silverstonespov52913 жыл бұрын
Sorry I don't have that video but the manual said: from zero play on the side bearings and then tighten 4 more hole on the adjusters. 2 on each side or depend on how much play between the pinion gear and the ring gear. I would mark the pinion shaft, the shaft nut before remove the nut to change the pinion seal. and mark both side on the side bearing adjuster and count the turn when taking it out. Hope this help
@togodbetheglory97253 ай бұрын
Exelent video,,I have a problem on my 2008 ram 6.7 ,,,I have a leak on passenger side wheel,,,I don't think I can tackle this project,,my question is how much it cost if I take it to the dealer
@silverstonespov52913 ай бұрын
I’m not exactly sure because dealer labor cost is high. You can call them and ask for a quote
@victormendoza7583Ай бұрын
I like to pull thay fill plug first. Dont want to do all that and find its seized.
@juddlyrut Жыл бұрын
There is tool that should be used to install the seals that keeps the seal square in the tube.
@alexlashley9839 Жыл бұрын
My driver axle seal is leaking 😔. Now I have to do this.
@callsignmohas5190Ай бұрын
I’m doing mine right now how are you able to get the axle nut off without the differential spinning around on you?
@silverstonespov5291Ай бұрын
I use impact gun or you can put the bar thru the u-joint behind the knuckle to stop it
@saltesta256214 күн бұрын
Is this the same process for Dana 60 on 2 nd gen rams
@silverstonespov529113 күн бұрын
I’m not sure, never open one of that before, if the year not far and it’s 2500 it should be the same set up
@jamesngotts2 жыл бұрын
My 2019 Ram Power Wagon 2500 front axle is leaking fluid in the same place as first shown in this video. 36700 miles. I do offroad it but I am not abusive in terms of speed or crashing into rocks. I am also pretty tame on the road and always do a check to make sure 4WD is disconnected before going from offroad to on road. Any input on why this leak would be happening at such low mileage? Not looking for the Ford/GM fanboy responses.
@silverstonespov52912 жыл бұрын
Check the Axle shaft U-joint make sure it not dry causing vibration or check the diff breather/ vent tube not plug causing high pressure inside the diff
@jamesngotts2 жыл бұрын
@@silverstonespov5291 ok thank you, the U joint is completely covered in fluid. I haven’t the breather
@stevesherer54162 жыл бұрын
I am doing both seals right now. Do I just put the bearing adjuster right back where it was when I started (counting turns, etc.) or is some pre-loading that must be done? Thanks.
@silverstonespov52912 жыл бұрын
Put it back the same where it was but, If the Vehicle Have over 200k km, the bearings worn out you can tight the adjuster one more note on each side to pre load
@stevesherer54162 жыл бұрын
@@silverstonespov5291 Thank you so much. And by "note" you mean turn?
@silverstonespov52912 жыл бұрын
@@stevesherer5416 Not turn, to the next hole. 1or 2 hole on the adjuster. about 1/8 turn.
@stevesherer54162 жыл бұрын
@@silverstonespov5291 Great! You've help me a lot. Thanks.
@stevesherer54162 жыл бұрын
@@silverstonespov5291 I can't get the adjuster all the way to original location without a lot of pressure. Do you only use the screwdriver in the video to tighten the adjuster? Should it be that tight if it's going back to original position? I know there's a $50 tool to turn the adjusters. What do you think might be going on?
@chiricahuasailing16902 жыл бұрын
good video could you include part numbers and or exact names for the seal you're replacing on the 2008 ram 2500. as well you could also mention 4x4 it is implied but it would help a search.
@logancatledge88089 ай бұрын
Why would anyone look up how to replace a front axle seal on a 2wd?
@davidgrover113 жыл бұрын
What is the cost usually for a shop to do these?
@silverstonespov52913 жыл бұрын
It aroud 3 to 4 hrs job depend 1 or 2 seal. Cost about $700 or more depend on how much the shop labor charge.
@clifflampitok7664 Жыл бұрын
would this procedure works on 2015 ram 2500 6.4 t.i.a.
@silverstonespov5291 Жыл бұрын
Depend on how it set up but it would be similar procedure, either adjuster wheel or shims try not to mix up, keep them the same side of shims or the same turn. Mark everything before take it out and keep them in order, good luck
@clifflampitok7664 Жыл бұрын
@@silverstonespov5291 thanks
@rb_frenchies559_2 жыл бұрын
My axle keeps piping out you think that the seal is bad
@silverstonespov52912 жыл бұрын
Check fluid level, see if the seal been leaking, check both side of axle U-joint too.
@fabiangaitan54242 жыл бұрын
Do you have to get the right seal out first to move the shaft over far enough to get the gear assembly out
@silverstonespov52912 жыл бұрын
I don't have to remove the right seal only the shaft, after both shaft out then the gear unit
@fabiangaitan54242 жыл бұрын
@@silverstonespov5291 thank you
@PureDWhiteCloud3 жыл бұрын
What about the right seal?
@silverstonespov52913 жыл бұрын
The right seal is the same process as the left seal
@beppo1 Жыл бұрын
“Quick and easy” seems like a subjective statement lol.
@alanclark1445 күн бұрын
Nope fuck that too many adjusters
@paulcini6084 Жыл бұрын
well done! informative video no bullshit. I was wondering my abs wheels speed sensor was ripped off I replaced the wheel side and bought a new plug end. but I don't know where the wire went. would you know where that sensor connects? I would love to know it's driving me nuts
@silverstonespov5291 Жыл бұрын
Normally it’s behind the plastic wheel well by the fender