How to Replace Front Caliper 2005-2010 Chrysler 300

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABC...
This video shows you how to a new front brake caliper on your 2005-2010 Chrysler 300. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa5B/1A...
• Pocket Screwdriver
• 10mm Socket 1aau.to/oaPR/1A...
• 13mm Socket 1aau.to/oa7f/1A...
• 18mm Socket 1aau.to/o4o/1AX...
• 21mm Socket 1aau.to/o4o/1AX...
• Brake Caliper Hanger 1aau.to/ogN/1AX...
• 1/2 Inch Impact Gun 1aau.to/ooj/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obih/1A...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oxN/1AX...
• Paper Towels 1aau.to/oxN/1AX...
• Rust Penetrant
• Drain Pan 1aau.to/otM/1AX...
• Floor Jack 1aau.to/oRN/1AX...
• Jack Stands 1aau.to/oMg/1AX...
• Wire Brush 1aau.to/oqm/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@bemojr]

Is this two pistons

[@Allegronaut]

The old caliper should be removed before installing the new rotors, the new caliper should be installed after the new brake pads. You got brake fluid all over the new caliper.