How to Replace Conductor Plate 2005-2010 Chrysler 300

Buy Now!
New Conductor Plate from 1AAuto.com 1aau.to/ib/1ATR...
This video shows you how to install a conductor plate on your 2005-2010 Chrysler 300.
This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• 13mm Socket 1aau.to/obbj/1A...
• 15mm Socket 1aau.to/obbj/1A...
• 7mm Deep Socket
• T30 Socket
• Ratchet 1aau.to/obmZ/1A...
• Socket Extensions 1aau.to/obbj/1A...
• Torque Wrench 1aau.to/oarD/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oyy/1AX...
• Gloves 1aau.to/oG6/1AX...
• Safety Glasses 1aau.to/oAI/1AX...
• Transmission Fluid
• Drain Pan 1aau.to/ou4/1AX...
• Funnel 1aau.to/ogd/1AX...
• Pick 1aau.to/oGY/1AX...
• Pole Jack
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@jamesbemus2895]

OMGosh! Fianlly, such a great step-by-step with tourque specs!!! I would have really suffered not knowing all the extra steps needed (remove the wiring connector, drop the transmission support). Thank you thank you thank you! The only difference I found was that with the 3.5L V6 the transmission is further forward, so you do not need to remove the transmission support.

[@FSCAUTO]

Thanks bro ....very educational video....I know I can do the job now 💪🏾💪🏾

[@503jmn]

How did you know you needed to replace this part? What was the symptom or error code?

[@evolutiongaming5011]

What’s was the reason for replacing

[@trueheartbankai]

How important are those solenoid covers? Mine doesn't have them.

[@jamescrowder5776]

Code2767 vehicle goes into safety mode & doesn't go above 40 mph

[@elmslawncare]

just check fluid up to temp or when its running...I saw you checked engine off

[@JBoyfreashX]

What if mine came with plastic?