How to Replace Front Inner Tie Rod 2000-06 GMC Yukon

Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00089
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2000-06 GMC Yukon
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/1ASTE00089
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• 18mm Socket 1aau.to/oWZ/1AXAA00043
• 22mm Socket 1aau.to/ojr/1AXAA00266
• Adjustable Wrench
• 1/2 Inch Air Impact Gun 1aau.to/omP/1AXAA00252
• Ratchet 1aau.to/oa9v/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaUM/1AXAA00015
• Torque Wrench 1aau.to/oafK/1AXAA00044
• 7/8 Inch Wrench 1aau.to/ofQ/1AXAA00011
• Rust Penetrant
• Floor Jack 1aau.to/oMo/1AXAA00068
• Hammer 1aau.to/oIU/1AXAA00091
• Jack Stands 1aau.to/oJE/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@willieronald7103]

You all probably dont give a damn but does someone know a method to get back into an instagram account? I somehow forgot my account password. I love any tips you can offer me!

[@jdstewart9689]

it also helps if you secure the steering wheel so it remains straight... just use some bungie cords for this..

[@lesteringram7549]

Thanks.

[@aaronstark1969]

Perfect video

[@GutterGuys]

😂

[@daddygtz]

Can u cut 1/2in on inner tierods if there to long

[@PhillipSotelo-jl6hs]

What size adjustable wrench ? 8” was too small

[@davenbuteau9825]

What kind of grease do you use

[@hdrjunkie]

So does loosening or tightening the tie rod ends move the front wheels side to side? I hit a boulder with the front corner of my Yukon and now my steering wheel center bar, instead of going side to side with the front wheels straight, it’s going up and down. Don’t know if I bent something or bent the frame or just knocked the front end out… the rim was shot, had to get a new one and it blew the tire out.

[@jarodmorris611]

I hope you've already had your suspension and steering looked at because that's not normal. I think you kind of already figured that.

[@Andrew-hh3ol]

Break out your wallet and go to a tire shop and get a quote for literally everything in the front

[@GoldenGate003]

Watched.

[@binowtf6418]

Using thread locker is so damn annoying for the owner of the vehicle, if they want to change there tie rod again later in the future there gonna have a good time trynna get that tie rod off