How to Replace Front Strut Mount 2003-2008 Toyota Corolla

Buy Now!
New Strut Mount Kit from 1AAuto.com 1aau.to/ib/1ASMX00290
This video shows you how to install a front strut mount on your 2003-2008 Toyota Corolla. If your vehicle is equipped with struts as separate components, rather than a complete assembly, eventually you may need to replace the mount.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 12mm Socket 1aau.to/objj/1AXAA00015
• 14mm Socket 1aau.to/objj/1AXAA00015
• 17mm Socket 1aau.to/objj/1AXAA00015
• 19mm Socket 1aau.to/oaa9/1AXAA00043
• 21mm Socket 1aau.to/oaa9/1AXAA00043
• Strut Spring Compression Tool
• 1/2 Inch Impact Gun 1aau.to/oqQ/1AXAA00252
• 3/8 Inch Impact Gun
• Socket Extensions 1aau.to/objj/1AXAA00015
• Torque Wrench 1aau.to/oaxk/1AXAA00044
• Gloves 1aau.to/oRo/1AXSS00048
• Safety Glasses 1aau.to/oJH/1AXAA00343
• Floor Jack 1aau.to/oXB/1AXAA00068
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@whogivesafourx]

Great presentation, first one I've seen which include the important Torque Settings, which is crucial when doing the job correctly.

[@jurekogorek1111]

good job, all you need is to show what the damaged part looks like

[@MikeJones-rk1un]

Great video. I wish my mount bolts were accessible like these.

[@simonoverall9035]

Good informative demonstration

[@andresransom2839]

The free play in the two lower bolts on the strut DO have an impact on the alignment. I’ve personally tightened the top bolts before I put the lower two in and it gets the alignment way closer to the actual original. And yes I have tried this doing bottoms first and it’s way more out of alignment.

[@Roleplay78]

New mount. But everything else will fail the day after :D Anyway, you make it look easy. Very nicely done!

[@franciscomartinez4520]

What if the top mount is having a small gap after is install and when turning the weeel the top hit the side of wall and make a clunks noises strud is new top mount and

[@aakudev]

Thanks, do you think there should be a rubber mount on the top between the chassis and the strut Mount, or it's always without a rubber layer. Was just thinking it could help take some sound and vibrations off the chassis.

[@eliabagbavor754]

Will the trq mount work with kyb strut

[@Yossarianhoenikker]

The upper spring seat rotated out of it's original position when you tightened the mounting nut. Does that not matter?

[@EppingForest304]

Use some penetrating fluid!