How to Replace Front Upper Control Arm Bushings 1994-2004 Chevrolet S10

Buy Now!
New Control Arm Bushing Set from 1AAuto.com 1aau.to/ib/MGSM...
This video shows you how to install front upper control arm bushings on your 1994-2004 Chevrolet S10. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Pry Bar 1aau.to/od3/1AX...
• 18mm Wrench
• 18mm Socket 1aau.to/ogp/1AX...
• 19mm Socket 1aau.to/ogp/1AX...
• 22mm Socket 1aau.to/oaN/1AX...
• Pickle Fork
• Trim Tool Set 1aau.to/oey/1AX...
• Needle nose pliers 1aau.to/ob5/1AX...
• Needle nose pliers 1aau.to/ob5/1AX...
• 15/16 Inch Socket
• 1/4 Inch Ratchet 1aau.to/omv/1AX...
• 3/8 Inch Drive Ratchet 1aau.to/ooT/1AX...
• Torque Wrench 1aau.to/oiN/1AX...
• Gloves 1aau.to/obB/1AX...
• Safety Glasses 1aau.to/oa2/1AX...
• Floor Jack 1aau.to/oef/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.