How to Replace Front Wheel Bearing Hub 2009-2014 Ford F-150 4x4

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new wheel hub and bearing on your 2009-2014 Ford F-150. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
Tools you will need:
• Pry Bar 1aau.to/oTu/1AX...
• 10mm Socket 1aau.to/oa97/1A...
• 13mm Socket 1aau.to/obt3/1A...
• 18mm Socket 1aau.to/oagG/1A...
• 22mm Socket 1aau.to/oop/1AX...
• 8mm Socket 1aau.to/oa97/1A...
• 1/2 Inch Impact Gun 1aau.to/osN/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obAm/1A...
• Swivel
• Torque Wrench 1aau.to/oaEh/1A...
• Anti-Seize Grease
• Bearing Grease
• Brake Parts Cleaner
• Gloves 1aau.to/o5W/1AX...
• Safety Glasses
• sanding disc
• Floor Jack 1aau.to/o49/1AX...
• Hammer
• Jack Stands 1aau.to/oTg/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford F150 2009-2014 12th Gen: • Ford F150 2009-2014 12...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@brandonunger1689]

Great video! Here are the notes I took so the next guy can use them: ================================================================ Ford F-150 Front Wheel Bearing Hub: ----------------------- Brake Caliper (2) nuts torque: 136 lbs Wheel Hub assembly (4) nutes torque: 129 lbs Tie Rod stub (1) torque: 85 lbs Axle nut torque: 20 lbs --------------------- Additional Notes: --------------------- ABS sensors facing up when installing new wheel hub Anti-seize spray needed Wheel hub / grease needed Sander/grinder attachment needed for any built up rust. ================================================================

[@shocktech102]

Great, except you forgot to pull vacuum to disengage the IWE actuators to fully seat the hub. Doing it without pulling vacuum has been known to create issues and eat bearings which.

[@DDDCAA1]

Great video attention to detail was great! That what have too do on my King Ranch thanks for such a great video keep it up!!

[@JoseMorales-ep7id]

When he took the axle nut off he pushed in that bolt. Why? Lol jw I'm a noob. Do you have to pull it back out?

[@B5834rfd]

What is the anti seize spray used at the 5:40 mark? What other brand names are there?

[@B5834rfd]

Oh, and in the description of the tools needed, it's a 21 mm socket, not a 22. Would have liked to know that before I got my wheel off and had to run back to the store to get a 21 mm socket.

[@Huzzunga]

Nice straightforward instructional video. I’m getting ready to do this right now now.

[@TRQ]

+@Huzzunga Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts! 1aau.to/m/Shop-TRQ

[@cameronforeman1043]

The torque is 129 ft lbs?? That sure does seem like a lot

[@Huzzunga]

Long story post and question. I replaced my left front last Friday. Today it is smoking hot. I bought the low end store brand Drive Works from Advance auto parts. They are going to honor it. But I can’t figure out why this went out in a couple of hundred miles. When I turn my hubs my front axles turn, which seems normal from what I have read. Seems counter intuitive with vacuum lines to the hub, and ring gear on the cv end and the hub. So, what the heck? This was an easy job. I even retorqued the left front to 20 foot pounds yesterday as a double check, 240 inch pounds on my torque wrench. I work aircraft not vehicles. Any more torque than that needed I used the company equipment I can’t think of an error I made, it is a very straightforward job, just heavy. 2010 Ford F-150 FX4 super crew 5.4 liter V8 I had a huge misadventure last year, left it in four low for 70 miles. Highway speed. I don’t know if these automatics kick it out of 4wd if you exceed, but I never saw high rpm. Yes I know that was stupid. Could it contribute months later? I don’t know, especially five days later when 4wd seems fine, and everything was great after the first bearing change. I’d appreciate any insight beyond Gee that was dumb, since pointed out the 4wd incident. It’s a longer story how it got by me. Working right up until I had to shower and run thirty miles to work would explain the distraction. As for not noting achuge rpm or jumping out of 4wd, you got me Thanks

[@terryheck9507]

So what hub do you need I have a 2011 4×4 supercrew xlr offload and there's like 50 different hubs

[@TheAbbatat]

Anyone with the TRQ Hub that can verify it's good quality? notice the significant difference in price with TRQ and the OEM motorcraft one, and I don't know if the TRQ ones are good quality.

[@Okierover]

Super helpful. Thank you. On a side note: the rust under there is cringe worthy!!! Mmmm Flakey!

[@TRQ]

+@Okierover Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@rickmucci4785]

Just an amazing and friendly video!! Thank you!

[@ghost_rider221]

This is what im doing to my f150 in the morning,,,thx again

[@ChrisCrazy117]

What impact is that Ik it’s ingersoll rand but what model number is it?

[@charles17508]

This part better last more than 6 months 🤔 i got 2 sent to me replaced driver side with a totally different wheel hub but passenger side im putting another trq wheel hub in so we will see they have a great warranty but who wants to do job over and over .i hope i just got 2 bad one the first go around and the one im putting on will last my oem lasted 100 thousand miles .trq first ones lasted maybe 10 thousand miles .

[@TRQ]

+@charles17508 Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@dolsen1975]

must have been a northern truck. geez

[@markcox3083]

That truck had to be from up north with all that rust!

[@michaelturner97311]

Thanks for sharing definitely a task I can do ✌🏽

[@maximosseas4377]

Great workmanship!!! Take care 💯💪🏻💯

[@fernandobriseno8164]

No loctite on the hub bolts?

[@MrLuanDo]

Thank you!

[@mikebarton8671]

Nice work

[@allanfranco4464]

WHY DONT YOU GREASE THE BOLT TREADS TOO,THAT HOLD THE HUB ASSEMBLY I WOULD THINK IT BE DOING JUSTICE NEXT TIME CAN COME OFF EASY ?

[@justsayin7937]

So it's a 4x4 huh? Thanks for wasting my time. It would be nice if you could mention that in the title...

[@naughtysmurf64]

So same for a 2 wheel drive minus all the 4x4 nonsense.

[@biz4twobiz463]

nice step-by-step