How to Replace Front Wheel Bearing & Hub Assemblies 2011-2021 Jeep Grand Cherokee

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00523
This video shows you how to install new front wheel bearing & hub assemblies from TRQ on your 2011-2021 Jeep Grand Cherokee. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
Estimated installation time for a professional technician is approximately: 3 hours 0 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oaab/1AXAA00020
• 21mm wrench
• 10mm Socket 1aau.to/obJD/1AXAA00017
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/otB/1AXAA00266
• 23mm Socket
• 27mm socket 1aau.to/oaC/1AAST00007
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obJD/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/ocaF/1AXAA00015
• Torque Wrench 1aau.to/obd4/1AXAA00044
• Gloves 1aau.to/obaX/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• 11mm Allen Wrench
• Floor Jack 1aau.to/oazv/1AXAA00068
• Jack Stands 1aau.to/oamj/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@RatedAwesome]

Appreciate the tutorial but there is an easier way to do this that doesn't involve freeing the knuckle

[@mcintirefamily]

Why is there 2 different vehicles? One with new and one with old?

[@yopp3.016]

That was so much unnecessary work

[@sheerwillsurvival2064]

Another great video

[@yopp3.016]

Why the tie rod?

[@alexgibson5064]

There’s a tear in that axle boot. Should’ve changed it out too.

[@alexgibson5064]

However I do like the amount of detail. Great tutorial

[@JamesValentineBaja1000]

😂😂😂