How to Replace Front Wheel Bearing & Hub Assemblies 2012-2016 Subaru Impreza

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ic/1ASHF00336
This video shows you how to install new front wheel bearing & hub assemblies from TRQ on your 2012-2016 Subaru Impreza. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2012 Subaru Impreza
2013 Subaru Impreza
2014 Subaru Impreza
2015 Subaru Impreza
2016 Subaru Impreza
Tools you will need:
• 14mm Socket 1aau.to/obL4/1AXAA00015
• 17mm Socket 1aau.to/obL4/1AXAA00015
• 19mm Socket 1aau.to/oasN/1AXAA00043
• 32mm Socket 1aau.to/odp/1AAST00003
• Brake Caliper Hanger 1aau.to/okw/1AXAA00439
• Wire Cutters
• Air Chisel 1aau.to/ob9/1AXAA00270
• Ratchet 1aau.to/obQE/1AXAA00016
• Torque Wrench 1aau.to/oaUh/1AXAA00044
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/oazr/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Floor Jack 1aau.to/oaic/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o6x/1AXAA00065
• Punch
• Wheel Chocks
• Wire Brush 1aau.to/ovF/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@NoCap-ei7mr]

AMAZING VIDEO! THANKS!

[@Nick_Sisson]

Do you need to take off the tie rod end to access the bolts holding the wheel bearing? Also, what do you suggest to use if you do not have access to an air hammer?

[@christalcampbell6438]

Will I have to purchase the hub with the abs sensor ?

[@shanegrant8078]

Hello, I have a 2012 Subaru Impreza hatchback fb16. Can a 2.0l hub/bearing work with my 1.6l?

[@frankiedesam8624]

Hi quick question I have a 2013 Subaru Impreza hatchback I have to change my wheel hub. But I was wondering is the wheel speed sensor connected to the wheel hub or is it connected at a different point. Was wondering if I. Change my wheel hub is it connected to that wheel hub or is it on a different spot thank you.

[@stonekold]

The CV boot looks brand new, doesn't it have a grease fitting? Or is that a scheduled replace and grease item

[@amtrakfanatic3547]

Mechanic: oh there's not to much rust The rust: 💀 💀 💀

[@fredoindakut]

swivvel socket has entered the chat lol