the wheel bearing went bad and it was making a lot of noise so I went a head and replaced it
Пікірлер: 58
@tbfcrypto3595 Жыл бұрын
This is a great tutorial! I bought the entire rotor and hub assembly together so this was much more detailed than i needed but if i decide to ever only replace only the hub, this video is the one im finding. One of the best I've ever seen. Absolutely great work!!
@JM-AUTO Жыл бұрын
Great to hear that, and thanks for the timne on the channel I really appreciate it.
@BrewerCooker10 ай бұрын
@@JM-AUTO where can we buy that grease tool? Thanks
@jmcimba2 ай бұрын
GREAT video man, you did a really good job explaining the process. I really appreciate the video, and the torque specs at the end were VERY helpful. Thanks for sharing
@JM-AUTO2 ай бұрын
Glad you liked it! thanks.
@VAcreeper Жыл бұрын
I have never messed with the bearings before and I did it all by your teachings.. thanks my friend.. Much appreciated!!
@JM-AUTO Жыл бұрын
also I much appreciate it, thanks.
@jonathanpenick8428 Жыл бұрын
Just wanted to say thank you because of your video I was able to fix my van myself. Keep up the awesome content!!! Thank you so much 👍👍
@JM-AUTO Жыл бұрын
thanks for visiting this channel, I appreciate it very much.
@extremeaircare40197 ай бұрын
Do you have any idea? Please read my comment.
@ScottGMcKinley Жыл бұрын
Great video. It really helps to anticipate what you will run into. Thanks for explaining
@JM-AUTO Жыл бұрын
Glad it was helpful! thanks appreciate it very much.
@nicholaskotsidis5294 Жыл бұрын
EXCELLENT video, thank you very much for posting this. It’s a huge help.
@JM-AUTO Жыл бұрын
Glad it was helpful! and thanks for visiting this channel.
@ianscreamsvideo11 ай бұрын
Wow. That's a lot of work. I am looking at used econolines and their service histories show a lot of bearing replacements. I didn't realize the rotor was merged w the bearing. On my Tacoma the rotor is super easy to change...pops right off once you remove the caliper. Seems like when you change the rotors on these you might as well do the whole thing. Or if you have to do bearings might as well change the rotors.
@JM-AUTO11 ай бұрын
thanks for visiting this channel and watching this video, yes they have different prcedure of replacing the bearing compare to traditional bearings.
@carlosbanos496 Жыл бұрын
Thank you, I'll ready, even before the show.
@JM-AUTO Жыл бұрын
great thanks.
@HULLBOX-yz9im Жыл бұрын
if you put a large gloop of the grease in the palm of your hand you can smack the bearing into the grease and pack it into the bearing saving you some time and also ensuring you get plenty of grease in the bearing , called packing a bearing , just slam it into the palm with the grease .
@JM-AUTO Жыл бұрын
yes you are absulutely right, now I have the tool and it is much faster and to insure no small spot will be empty inside the bearing, thanks for sharing that is very appreciated.
@cbmirada5 ай бұрын
Nicely done, thanx for the help 👍
@JM-AUTO5 ай бұрын
thanks for sharing.
@carlosbanos496 Жыл бұрын
Thank you mu brother, for showing this video!
@JM-AUTO Жыл бұрын
My pleasure, thanks for taking the time on the channel.
@arifeliciano1275 Жыл бұрын
Great Video. Clear Step by step.
@JM-AUTO Жыл бұрын
your comment is very appreciated, thanks for the visit.
@wonderfulcolubrids Жыл бұрын
Nice step by step detail. Would you know how to tighten the play on the steering wheel or a 2009 Ford E250?
@sebastianroman76797 ай бұрын
Hello JM again. Happy new year. Would this procedure apply for my 2003 Ford F350 5.4L SRW truck? or only for the E line of Fords?
@JM-AUTO7 ай бұрын
hi and happy new year for you too, no it is not the same, only for E series. thanks gain for your support to the channel.
@wachutalmbout6985 Жыл бұрын
Great video. Very helpful. Thank you
@JM-AUTO Жыл бұрын
Glad it was helpful! and thanks for the visit to my channel.
@marcuslmichael Жыл бұрын
Awesome video. Thanks! Don’t you think this would work for an e-150 too?
@JM-AUTO Жыл бұрын
thanks for your comment, no there is some difference between.
@johnlewis485610 ай бұрын
Thank you
@JM-AUTO10 ай бұрын
Thanks very much for your time on the channel.
@rev.lazarus906 Жыл бұрын
great video. I'm a new subscriber. Which state are you working out of?
@JM-AUTO Жыл бұрын
Thanks for the sub I appreciate it very much, Im in NY.
@glenndowning33846 ай бұрын
Hey I’m wondering what size spindle nut socket gets used for tightening? Thanks!
@JM-AUTO6 ай бұрын
27mm socket thanks for watching.
@rojasroja Жыл бұрын
Buenísima explicación. De mucha ayuda. Muchas Gracias
@JM-AUTO Жыл бұрын
gracias a usted por visitar mi canal y por su comentario.
@carlosbanos496 Жыл бұрын
You mentioned an adapter, when installing. But you did not mentioned an adapter, when removing?
@user-fx5yl9tb1z10 ай бұрын
Your awesome thank you much for knolwedge
@JM-AUTO10 ай бұрын
thanks appreciate your comment and for visiting this channel.
@Spidercarfix Жыл бұрын
Awsome video!!
@JM-AUTO Жыл бұрын
thank you your comment is very appreciated
@BrewerCooker10 ай бұрын
Hi. Happy sunday. Do you have any videos on E250 rear parking brake replacement? @amautorepairnum1
@JM-AUTO10 ай бұрын
hi, thanks for visiting this channel I very much appreciate it, you can find on alixpress or ebay, unfortyunately I dont have a video like that yet I apologize for the inconvinience.
@danieltrottier8599 Жыл бұрын
Thank you muchacho.
@JM-AUTO Жыл бұрын
thanks for visiting my channel I really appreciate it.