How To Replace Fuel Filter MAZDA CX5 In Tank Filter

MAZDA CX-5 KE 2.0L SkyActiv-G Petrol Direct Inj. 4cyl 4dr Wagon 6sp Auto FWD 2012 To 2017
Hi
If you are looking for help with your Automotive Repairs, Automobile Installations, Mechanical Repair or Adjustment, please head over to carfix for information on it
Please drop your comments and subscribe if you like my videos. Thanks for all the support.
Disclaimer
We are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not carfix

[@dennismihai8560]

Thank you very much

[@हरिःव्योम]

you don't blow the dust, but suck it up with a vaacum.. exactly when you lifted the filter assembly at @3:55, you let many dust get into the fuel. duh!!!

[@tomnguyen1802]

Good video, I’ll be attempting this soon. Can you do a step by step video on how to do timing chain replace on cx-5 2.5L 2016 because that’s what I have

[@davidellis2579]

Can the filter screen be replaced also??

[@kuujjuaqguy]

I noticed you didn't actually replace the filter material, the triangle padding at the bottom, but you replaced the inner housing, wouldn't it make sense to do the opposite? Just replace the filter padding material itself, and just clean the plastic housing? Btw which type of grease would you use for the O-rings that won't contaminate the gas, but still do it's job by lubricating?

[@Lengsel7]

That housing IS the actual filter. That bottom mesh is a screen, which, if it were me, I would clean.

[@moisessolar9865]

EL conector (cable negro mayor grosor) quedo por fuera y no por dentro ..mirar como están al principio y como lo dejo ...aguien que lo conforme...gracias

[@tomnguyen1802]

Also a head gasket change video to if possible I just wanna learn 😅

[@minhngoquang3405]

to me, I will replace the fuel filter when the tank is only 1/3 left :D . Thank Carfix.

[@davidellis2579]

When you pulled it out of the tank, the excess flexible fuel inlet line was inside the housing. On reassembly it is not inside.

[@koksionglee7978]

I noticed that too.

[@rashadsindi5059]

I’m also aware that the housing has a different filter element inside of it.

[@ghozicoba]

Does motor socket power supply postition matter? I am afraid misplace the right to the leff

[@bmerceri69]

Did you clean the filter on the bottom of the orange piece before you put it back on? It looked really dirty initially, then when you put it back on, it looked much cleaner.

[@popeyevalls]

Any answers to your question yet? I have the same concern.

[@jdogofoz3642]

​@@popeyevallshe tells you he cleaned it in the video lol

[@rodent]

you left the fuel hose outside the can.

[@darkos2985]

Good job 👏 👍

[@CanadaHighways]

How often you should change it?

[@carfix1993]

80000km

[@davidellis2579]

Handbook service schedule says 150000km

[@koksionglee7978]

Around every 3 years

[@koksionglee7978]

Noticed routing of fuel hose wrong on the outside and why not replace the strainer?

[@rashadsindi5059]

You only cleaned the filter and replaced the housing. To me that was a waste of money.

[@jdogofoz3642]

isn't the actual filter inside the round housing the 2nd filter at the bottom is just a extra precaution to stop stuff before the actual filter that's why he just cleaned it

[@Jake-2011-]

That is really a stupid design.

[@aaronron6637]

Perfect

[@konstantinoslampropoulos4125]

where can i find this part? may ihave the adress? TY

[@carfix1993]

Repco

[@Ahleen0]

عمل جيد