How To Replace Headlight Assembly 1992-99 GMC K1500

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/19/cE/headlight-asse...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oyI/1AXAA00013
• Pocket Screwdriver
• 10mm Socket 1aau.to/ouN/1AXAA00017
• Socket Driver
• Socket Extensions 1aau.to/oyp/1AXAA00015
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@johnfinegan5934]

if you're going to go through all the effort to squeeze the light behind the grill, just do it right and take the grill completely off so you dont risk breaking your plastic grill.....

[@larryjohnson3033]

You said perfectly what I was thinking 🤔, makes no sense doing it this way

[@oldleatherhandsfriends4053]

I know the plastic grill is $150.00 now.

[@jamesbenton1346]

Nice to know what size bolts what tools are needed

[@robcarteevids3222]

Thanks for this

[@jamesbenton1346]

What size is the nut size my man most people don't take the time to tell what size socket is needed not unless I wasn't paying attention. good video

[@amenserm949]

The video shows you installing new light assembly, but a the end of the video the top head lamp assembly is old and faded.

[@jasonyake3189]

2 bolts to remove heaedlamp from mount bracket, then not removing and bending grill outwards. Never taken one bolt out of grill before when working in garage to change any single light in front end, including corner lights.

[@BisforBlyat]

This is for removing the entire headlight assembly. Not just for removing the headlights themselves. Personally I needed this because one of the two bolts on my passenger side is stripped and I am unable to remove the headlight.

[@Carlosmartinez-jz7sr]

Good job thanks

[@STARZBUNNYZ]

I didn't know all of that was part of the headlights housing. I'm talking about the one for the gmc

[@hdrjunkie]

Geeze GM really didn’t think anyone would be changing their headlight assemblies did they?

[@Blacklabels686]

Any idea what size the mounting bolts for the headlights are?

[@TRQ]

+@Blacklabels686 We do not have this measurement available. They will be the same as the OE bolts. You may try contacting your local dealership's parts department to determine this information.

[@electrichellion5946]

No one ever shows the passenger side headlight replacement. The driver side is easy.

[@TRQ]

+@electrichellion5946 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@eldonscharer6672]

You did this completely wrong. You only need to remove the two vertical bolts to remove headlight. You should delete this video and repost correctly

[@BisforBlyat]

This is for removing the entire headlight assembly. Not just for removing the headlights themselves. One of my two pins are stripped on the passenger side of my truck so I need this.

[@rivit7615]

Dude STARTS bolts with power tools! SHAME!