√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@dalehenaman14362 жыл бұрын
Nice video
@markericksonsr3130 Жыл бұрын
You make it look so easy. Thank you
@NealTK Жыл бұрын
What was the deal with the 2 silver (aftermarket) toggle switches that weren't put back during reassembly?
@taminoyueksel33042 жыл бұрын
Does anyone know what colour wire the headlight is on the light plug? I would like to tap into it to hook up some interior ambient lighting that's one whenever the light is on.
@burns3572 жыл бұрын
just pop off the cover on the side of the dash, reach in and release the tabs holding the switch in, install new and snap cover back on. took 30 seconds!!!!
@ramos4238811 ай бұрын
what fuse is connected to this module?
@michaelgillett42997 ай бұрын
There is two lights on that yes,head lights control panel ,look like an yellow an green,two small lights
@glennsgarage50802 жыл бұрын
Good Grief! that procedure is much harder than it has to be
@brentpraeter32262 жыл бұрын
you could maybe just pop out the headlight switch without having to take off the entire dash panel? For sure need to loosen, but I'll let you know how it turns out
@nerdlabs00142 жыл бұрын
how did it go :) have to do mine this weekend
@burns3572 жыл бұрын
or you can pop the end cover off the dash, reach in the hole, remove the switch and plug in the new one, whala!!! 30 second job!
@NealTK8 ай бұрын
Remove the knee bolster?? Take apart the dash panel?? You must be following the GM dealership guide (on how to screw your customers). I the video, when he starts unscrewing the knee bolster, you can see a dark grey panel on the far left. I you use a flat head screwdriver, it pops right out and you have full access to the back of that switch panel. GM says to bill customers 1.8 hrs of labor + parts. Job actually takes about 10 minutes.
@unknownguy967 Жыл бұрын
Thanks g
@nerdlabs00142 жыл бұрын
ty
@jimbohernandez4882 Жыл бұрын
You don’t need to take it off entirely I just loosened 2 screws and just popped that side and got it out