How to Replace Headlights 2011-2021 Jeep Grand Cherokee

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
This video shows you how to install new, quality, TRQ headlight assemblies on your 2011-2021 Jeep Grand Cherokee. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obF9/1A...
• 10mm Socket 1aau.to/obGr/1A...
• Trim Tool Set 1aau.to/oawA/1A...
• 1/4 Inch Ratchet 1aau.to/obGr/1A...
• Ratchet 1aau.to/ob8n/1A...
• Brake Parts Cleaner
• Gloves 1aau.to/oa4D/1A...
• Safety Glasses
• Floor Jack 1aau.to/oawR/1A...
• Hammer
• Jack Stands 1aau.to/oaiS/1A...
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@kennyw7453]

I cannot believe someone designed that like that, all that dismantling to replace a lamp. Glad I have an 04.

[@andybee97]

Excellent video, thanks for taking your time explaining every detail, most people fast forward their videos but you showed your struggle which we can learn from, am for sure subscribing to your channel.

[@timx1733]

2018 JGC- After attempting to replace the low beam bulb through the access port like one is supposed to be able to do, I came to the conclusion that I would need to disassemble the whole front end of the car as you have shown us how to do here. Thanks! (It is absurd that the mechanical engineering manager for the JGC approved of this design. Next time I'm buying a vehicle, I'll ask if I have to take the front end apart to change a bulb or the engine apart to check the oil.)

[@TRQ]

+@timx1733 Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@philwilson4476]

Excellent detail in your video. The information is greatly appreciated!

[@MrMouti]

Can the push pins be reused when taken out ? Or do I need to buy new ones

[@erinattwood6299]

I have a 2015 jeep GC in australia with hid xenon bulbs $290 per bulb and already broke 2 of them trying to install them. Worst headlight design ive ever seen. Thinking of retro fiting led like this but your bulbs are different to my setup so ill keep searching.