How To Replace Inner Tie Rod 2011-15 Kia Sorento

Buy Now!
New Tie Rod Set from 1AAuto.com trq.video/ia-1...
New Tie Rod from 1AAuto.com trq.video/ia-1...
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2011-2015 Kia Sorento.
• Check here for more videos on the 2011-2015 Kia Sorento: • Kia Sorento 2011-15 2n...
This repair was done on a 2012 Kia Sorento LX 3.5L and the process should be similar on the following vehicles:
2011 Kia Sorento
2012 Kia Sorento
2013 Kia Sorento
2014 Kia Sorento
2015 Kia Sorento
Tools you will need:
• Flat Blade Screwdriver trq.video/oanM...
• 19mm Wrench trq.video/oxq-...
• 24mm Wrench
• 1/2 Inch Impact Socket Set trq.video/ox-1...
• 1/2 Inch Impact Socket Set trq.video/ox-1...
• 21mm Socket
• 24mm Socket
• Inner Tie Rod Removal Tool trq.video/oab-...
• Pickle Fork
• Hose Clamp Pliers trq.video/ocE-...
• Locking Pliers trq.video/ofi-...
• Pliers
• 1/2 Inch Impact Gun trq.video/ohs-...
• Socket Driver
• Torque Wrench trq.video/oTt-...
• 15/16 Inch Wrench
• Brake Grease
• Gloves trq.video/omK-...
• Liquid Thread Locker
• Wire Ties
• Center Punch trq.video/of3-...
• Floor Jack trq.video/ozQ-...
• Jack Stands trq.video/oxS-...
• Pick trq.video/osQ-...
• Sledge Hammer
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Kia Sorento 2011-15 2nd Generation: • Kia Sorento 2011-15 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@joeschmo349]

I've been trying to fix the inner tie rod on my 2013 Kia soul for way too long after I watch this video now I get it

[@zurylopez333]

Thank you for the extraordinary explanation, makes easy .

[@henryhurtado2035]

Thank you for your video,very good. Henry Front Arizona .

[@torresdelpaine8888]

Great video. Not sure, but you may have forgotten to install the outer tie rod cotter pin. Saw you take it off, but didn’t see you put another one back on at the end.

[@wondmayele9886]

Yes he did forgot

[@juarezhicks407]

Thanks. Great video.

[@dsb4221]

Could you tell me the size of the tie rod tool adapter size pls

[@joseorta9928]

I would of loved it if you would of changed a kia fortes 2018 inner tie rod and outter...but still great video.

[@fualeomiti3341]

Good sir do you have a way to take off a inner tie rod that is rounded i have yet to find anything to help remove it pls help if can thank you

[@xXbakedmageXx]

Air Hammer with a sharp bit work a grove and then use that with the hammer to push it around and unscrew it