How to Replace | Install 2011-14 Dodge Charger Headlights - Low Beam?

[@AllaLighting]

For 2016~2021 Dodge Charger with halogen capsule headlamps, we only recommend FL-BH version LED headlights bulbs and Alla advanced LED decoders based on customers feedback : Headlights bulbs: allalighting.com/products/9005-hb3-led-bulbs-replacement-upgrade-halogen-lamp Advanced Decoders: allalighting.com/products/9012-9006-9005-led-decoder-canceler-capacitor-canbus-headlight-kits This because Dodge Charger require more powerful LEDs to upgrade to avoid the flickering or error code.

[@Maine76]

Will your bulbs work with an 11?!?Maybe different than newer 16 and up Chargers

[@israelocasio2788]

Just installed these headlight bulbs successfully on my 2014 Charger Super Bee. Couldn’t have done it without having watched your instructional video. Didn’t realize how hot these bulbs get!! Thanks for putting this information out to everyone.

[@RodLogan1]

I rarely comment on KZbin videos but this one deserves it. Very good explanation and visuals. Definitely appreciate your help. Thanks!

[@AllaLighting]

Thanks for your comment, and we are glad that it is helpful for you.

[@AllaLighting]

This video shows how to install, remove & upgrade 2011-2014 Dodge Charger LED Low Beam Headlight Bulbs. Fast Bulb Finder: allalighting.com/pages/bulb-finder-shop-by-vehicle-led-light-bulb-car-truck?rq=yr_2014~mk_dodge~md_charger~dg_with-halogen-capsule-headlamps~fv_low-beam-headlight-bulb; Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos!

[@edwindelgado5545]

Just changed my on driver side on 2013 SE and this is much better than trying to go ny driver wheel if this is your first time!!!

[@JesusHernandez-lj4zg]

You picked the easiest side to do it, i would like to see you doing it on the passenger side

[@alphatimca6656]

I think the easy side is the passenger side dingus... you don't have to remove the airfilter to get to it. I just did it with one hand in 1 minute.

[@elijahelijah2042]

LMAO..Wow.. I swear I just wrote that same comment without even reading yours lol.. The passenger side Is a nightmare

[@felefeefs]

I like the way he simplifies the details

[@180waver]

Great vid man..simple n very good explanation..most important u mentioned da exact size socket..jus watch dis video once n went to change out my low beam..thanks!

[@AllaLighting]

It is our pleasure, and we are glad that our information is helpful for you. If you need any assistance, please feel free to contact us.

[@89imp03]

Thanks for the info. And good looking out listing all the other bulbs in the description 👍👍

[@AllaLighting]

Yes, we insert the other bulbs information for your convenience once required, and you can easily get the information, if you need further assistance, please touch us directly by phone or email for free. Thanks for your time to watch for it, and hopefully the video is helpful for you.

[@Maine76]

Came here looking for a poss easier way,have done without removing airbox and i must say it was difficult!Thought to remove whole assembly but way more involved,did on another vehicle and was very simple!Let's just say Automakers make it difficult to do so most will give up and bring it to Dealer!!Will try on my 11 Charger.Thanks

[@ACProductions77]

How bout the other side why not show that area?

[@Stealth853]

Because its the same configuration and nothing needs to be moved out of the way

[@pfizerbob2000]

Actually inside the wheel well of each front tire is a big circle handle you turn counter-clockwise and it comes off revealing a large hole with direct access to the low beams on each side of the vehicle. You can change both lights in less than 5 minutes. However for high beam you do have to remove the airbox

[@AllaLighting]

That is a great idea, thanks for your suggestion, we will improve that. and for the high beam, air-box will be required to be removed to install the high beam headlight.

[@josephkreifelsii3734]

No kidding? I'll have to look, could have saved me nearly $1000 so far.

[@jimmygee3219]

Uhhh no there’s not

[@Breezy-je9xx]

Thank you ❤

[@phillipwayneblanchard]

Thank you for the help repairing my car!! You are awesome!!

[@AllaLighting]

It is our pleasure and thanks for your support, If you need any assistance or have any questions, please feel free to contact us.

[@debomyguy]

Good explaining 💯🔥

[@DrSmurffen]

I have a 2013 with halogens and my connections are different than yours... I have 4 prongs but the LED are only 2?

[@josephkreifelsii3734]

Did you get an answer? I have 2013 RT AWD, and plan on adding LEDs this summer.

[@tuchAneyfan]

Looking for this answer

[@PortefaixMessenger]

Hi, thanks a lot for this great video, well done. My questions are (4 questions) 1- What color hue outputs these LED bulbs... Is it a stable very white color or does it gives a bluish or multiple color glaring range? 2- Do they blind oncoming cars since the housing is not been made for these lamps? 3- On a charger 2012 is there an additional components to install to avoid flickers or dash warning lamp out? 4- If so, where can I get this additional component?

[@AllaLighting]

Thanks for your message, below are our answers: 1. The color is 6000K-6500K xenon white with little blue tint for clear lens, yet if the lens is not clear, it may come a little blue tint. 2. LED are anti-glare others which is not like HID. 3.For this car, there is no extra load resistors, yet it can't be 100% guaranteed which depends on the specific trim. 3. If you meet the flickering or error code, the load resistor link is allalighting.com/accessories/397/Load%20Resistors.html , please choose the correct bulb size type. If you need further assistance, please feel free to contact us.

[@PortefaixMessenger]

@@AllaLighting Thank you for your fast reply.

[@AllaLighting]

@@PortefaixMessenger it is our pleasure

[@Itsnotthatdeepttv]

Thank you I really appreciate it ! ❤

[@Zuhair999Zuhair]

Please please please how I can install the left side?? Really it's hard to reach over there. Di you have another video??

[@AllaLighting]

Would you please advise your charger's year? and also please check your owner manual for some installation guide for your vehicle.

[@808Goose]

Can you access the turn signal bulb the same way?

[@colinpalmer3]

Hello! If the charger needed an anti flciker device for low beams, would the small module fit inside this dust cap? If so, wouldnt we be worried about the heat caused by LED and module? Anyone have issues with it overheating inside the headlamp?

[@davidrichardsr.9191]

How is the problem with glare considering they are reflector housing. I want to put LED's in my 2012

[@AllaLighting]

That will look great and amazing when you upgrade to LEDs, for the projector-lens too.

[@michaelcaldwell3869]

What about the other side

[@jaime9813]

you didnt replace the high beams?

[@illuviium]

So you mean to tell me it’s this easy and I’m sitting here at a body shop having them both get fixed and it might end up costing me $280+?

[@jeffdiggs7870]

Is a TIPM resistor not needed for this model charger?

[@AllaLighting]

For most vehicles of this model, a load resistor would not be required for low beam application. However, for some vehicles, a load resistor may be required to solve issues such as hyper-flashing, error codes or more depending on the vehicles electrical system.

[@codypatfield2812]

Witch led bulb will fit a 2010 Charger?

[@AllaLighting]

Thanks for contacting us, do you ask about the low beam headlight for 2010 Dodge Charger? if so, based on the bulb size guide, for the vehicle with halogen capsule headlamp, it is 9006 as the low beam headlight. (high beam headlight is 9005), so the correct low beam headlight link is allalighting.com/vehicle/2010-Dodge-Charger_with_halogen_capsule_headlamps-Headlight-Bulb-Low-Beam?rootId=84778&secondId=91796&categoryId=91899&locationId=10 ; and high beam headlight link is allalighting.com/vehicle/2010-Dodge-Charger_with_halogen_capsule_headlamps-Headlight-Bulb-High-Beam?rootId=84778&secondId=91796&categoryId=91899&locationId=20

[@josephkreifelsii3734]

These HID bulbs are driving me nuts. They last like 24 months or less, and at this point I'm currently having to replace one side once a year. Of all the cars I've owned, Dodge Charger 2013 is the worst when it comes to installing new bulbs. It takes too much work to access the compartment. I assume that LED light bulbs will last longer than the car itself, so I definitely want to look into adding them if I can.

[@B_HarTz]

Calm down Joseph and find yourself a girl

[@nekesrub5327]

What the led bulb # and how much. Also where did you get them

[@AllaLighting]

The LED Bulb for low beam part number is H11, the link is allalighting.com/shop/product/H8-H9-H11-LED-Headlight-Bulbs-Fog-DRL-Lights-Upgrade-6K-Xenon-White/1648

[@MrM4rvelous]

Is Diesel Mike sponsored by you guys?

[@AllaLighting]

No, he purchased the items from us.

[@MrM4rvelous]

ALLA Lighting Automotive LED Bulbs but you're using his video, you should give the guy some kind of reward... anyways how much to ship this light to Canada? greater Toronto area?;

[@AllaLighting]

@@MrM4rvelous Haha, yes, we have give him the discount based on the social media program from us, for the cost to Canada, it is 12.99$ for one pair standard shipping, yet if you prefer expedited shipping, the cost will be about $20.00 which will be delivered within 5 business days.

[@bigswervo434]

How can I contact y’all?

[@jetg2059]

Why do they say on their website that the led lights are not street legal

[@babberdydabberdy3551]

Do you also sell high beam/daytime running led bulbs for the charger and also do they come in a bluish/whitish hue?

[@AllaLighting]

Thanks for your message, please advise your vehicle's year for further assistance, thanks in advance.

[@babberdydabberdy3551]

@@AllaLighting my bad I thought I did lol 2014 dodge charger sxt

[@AllaLighting]

@@babberdydabberdy3551 Thanks for your fast reply, based on the bulb size guide, it is 9005 as high beam/DRL bulbs, yet for your vehicle, extra decoders maybe required to avoid the flickering issue or malfunction.

[@QHall86]

Did so the drivers side installation. Looks much harder

[@AllaLighting]

Thanks for your comment, yes, it may be different for the driver side and passenger side for one side may have air stake and has limited access to it.

[@joshpaez1388]

What about the passenger side? Is it as easy as the driver’s side?

[@AllaLighting]

Yes, it is almost the same way to replace the stock headlight.

[@xx412xxbluntz8]

Way diff on a rt

[@Jordanfiend361]

Xx412xxbluntz how so?

[@xx412xxbluntz8]

@@Jordanfiend361 you gotta take the front bumper off

[@Jordanfiend361]

Xx412xxbluntz damn. Mine just went out

[@xx412xxbluntz8]

I have the 100th anniversary addition I had to take my bumper off cause the housing light needs to come out you can't pull the bulb out with out it.. My fog lights are the same way its annoying.

[@Jordanfiend361]

Xx412xxbluntz I was afraid of that. How did you remove the black housing without breaking it?

[@Pixar707]

Lol to change one part you haveto take a part whole car this americas

[@aliresai5738]

Wait how come you did not get message on your screen that says light out ?? Lol

[@AllaLighting]

It depends on the vehicle, for some vehicle, just plug and play, yet for some vehicles, extra load resistors will be required to avoid the error code on the screen.

[@josephkreifelsii3734]

I have a 2013 charger and it has never told me about lights being out. I have to catch it myself by using the key fob before entering the vehicle.

[@rossabeyta3111]

Wrong title!

[@davidwrestling9983]

I call bs, mine won't come out

[@sincity313]

Didnt work for me, my car has HIDs

[@Jolly_Green23]

My low beams are HID, but my high beams are halogen, so I'm thinking about upgrading those. I wouldn't want to change my HIDs to anything else.

[@roberttempest7543]

@@Jolly_Green23 what year of charger? I have a 2011 charger rt

[@Jolly_Green23]

@@roberttempest7543 2014 R/T. I upgraded the high beams and fog lights to LED about a year ago now. Best thing I ever did. (I also upgraded the reverse lights, rear side marker lights, license plate light, door panel lights, and front parking lights.)

[@roberttempest7543]

@@Jolly_Green23 what brand of lights did you use for the others?

[@Jolly_Green23]

@@roberttempest7543 I buy everything from superbrightleds.com. I've upgraded two other vehicles too. They've been a great company to deal with.