How to Replace Install Saw Blade in DeWALT DCS570 20v MAX XR

[@affordabledesertliving3487]

Thanks so much. The manual suggests you need a degree in engineering just to study all of the parts before you even bother to install the blade. Also I had no idea the wrench was in the back of the saw. Super helpful. Many thanks!

[@TheCrunchbird]

Thanks for the great video. The manual sucks! Some idiot OK'd the use of light grey type on white paper. Your video was a great help to me. I was amazed to find out that there was a wrench housed in the back of the saw.

[@The_Gunslinger_Guy]

I noticed several people commented that the "tip cover" or washer that holds the blade on would not come off when the bolt was removed. I tried prying it off to no avail. Then I simply turned the saw on its side and gravity did the trick. Seems simple and stupid now but it had me stumped for a bit and evidently I wasn't the only one. Thank you for a great video!

[@dianab3005]

Better than the instruction manual 👍

[@TeckDrivenTeck]

Thank you :)

[@chris123chris82]

Incredibly helpful my man! I’m just starting out in carpentry and picked up a bunch of tools. Now I need to learn how to use them properly and change things like blades. Thanks a million for this simple video.

[@ricotaylor3958]

Best video yet. The manuals are always minimum with details. I snugged up the blade after putting the blade on with the lock still engaged. After tightening, I released the break and noticed sluggish turning? It seems to click as it turns the blade? I guess this is normal ? I will put battery on and check it tomorrow when the battery is charged. Thank you for your videos! Much appreciated.

[@iholarabaybay]

Thank you. Didn't know that the wrench was on the back of the saw.

[@Yashinka]

Thank you for saving me time and frustration. You explained it easily enough I followed along and got it first try.

[@kyrojames9661]

Thank you! Clear walkthrough. The locking part is key

[@SuperGizzzmo]

Outstanding video not complicated straight to the point very easy to understand. 👍

[@musicsbest1]

Amazing no bs straight to the point 💯

[@twesttv]

Excellent job brother, thanks

[@Niveksllew]

Thanks man, this was perfect.

[@Theguys1]

Love this guy!

[@relaxingpanda1308]

Great video really helpful

[@marcoboudreau4526]

Thank you.

[@mannyi]

Muchas gracias.

[@ryanchall]

Yes! This was helpful!

[@DannebergAcres]

All circ saws run counterockwise.

[@TeckDrivenTeck]

Yes, and no. For left handed circular saws the it spins clockwise. But the blade teeth will always face and cut the wood same way.

[@GamesNShit]

Thanks!!!!

[@Spring_sprang13]

Thank you!

[@UsmanKidwai]

Thanks, very helpful video.

[@spencergbrosmgsawb3565]

How do you get the tip cover off ? mine seems locked in

[@ninenumbersmusic8269]

Mine is too can't get it off

[@The_Gunslinger_Guy]

@@ninenumbersmusic8269 MIne is too!

[@normt819]

I think you turn it counterclockwise right ?

[@TeckDrivenTeck]

To unscrew counter-clockwise

[@chinchilla57]

Thanks man!

[@CorrectiveStep]

have same model, full battery, and not overtightened, but the saw will not turn. there is a clicking sound that comes up with it. Have had it for just under 1 year. Any advice?

[@TeckDrivenTeck]

When you say will not turn do you mean will not lock in place to remove the blade or do you.mean it does not turn phen you press the triger?. If it clicks and will not turn when tricker is pressed i would say relay might be bad and you need to try to get it replaced hopefully thrue warrenty

[@TheCurlyFitChicOriginal]

I need to install my blade and have tried clockwise and counterclockwise to remove the screw to install. Nothing is moving. Which way should I be turning to remove to install blade?

[@TeckDrivenTeck]

Counter-clockwise to remove the screw

[@layeekromah5332]

Thanks

[@TeckDrivenTeck]

Glad I was able to help

[@ninenumbersmusic8269]

I have a saw like this and i got the screw out but i cannot get the outer washer out (the lock washer) can you show how to remove that washer?

[@TeckDrivenTeck]

I will dpuble check tommorow. But i believe it just pops up.

[@TeckDrivenTeck]

Sorry for yhe delay. The bottom washer does not come off. You can take it off if you really needed to by removing the ring that holds it in place. Only the top washer comes off and that should just pop up once you remove the screw.

[@TvorCrl]

Can't see what's going on after lock

[@TeamTriumphHQ]

Lock won’t work. Fml

[@8989richi]

Bruv. You never filmed the most important part. The part when actually the disk’s going in. Loooooool you cut the part in the video

[@djdocrt]

Get to the point