How to Replace Instrument Cluster Bulbs 93-03 Ford Ranger

Buy Now!
New Instrument Cluster Bulb from 1AAuto.com 1aau.to/ia/1AIM...
In this video, 1A Auto shows you how to replace a broken, damaged or burnt out instrument panel light bulbs. This video applies to the 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03 Ford Ranger
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
🔧 List of tools used:
• 7mm Socket 1aau.to/oiY/1AX...
• 8mm Socket 1aau.to/oiY/1AX...
• Ratchet 1aau.to/omF/1AX...
• Socket Extensions 1aau.to/okG/1AX...
Subscribe: / @1aauto
Check out our playlist:
Ford Ranger 1998-2012 3rd Gen: • Ford Ranger 1998-2011 ...
Ford Auto Repair Videos: • Ford Auto Repair Videos
Ford Ranger 2nd Generation 1993-1997: • Ford Ranger 2nd Genera...
For More Info visit us at 1aau.to/h/ww/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@jedclampett6466]

$35.95.....?..... don't think so. Amazon price for the Dorman 5 pak.....$9.72

[@race_to_the_bottom7331]

This is an extremely useful video. I installed new bulbs today. I would have had no idea where to start. Some observations. At 1:25, the radio does not have to be removed or disconnected; just move it a few inches forward. It is not necessary to remove the screw at 2:10. It plays no part in this procedure. The procedure at 5:05 is unclear. I found that the right tab should be pushed from right to left. There is a small plastic projection in this area to which I clamped a hemostat to help withdraw the gear range selector. The connector at 5:29 proved difficult, so I just left it connected. There was plenty of room to remove the bulbs. I snapped them out and installed new bulbs into the original bases. I tested everything before I buttoned up. Thank you 1A Auto! :-)

[@1AAuto]

+race_to_the_bottom Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@realbarretlewis2559]

I swear, you guys have the answer/video I need every single time! Thank you!!

[@JeffTheHokie]

I left most of the wiring harnesses plugged in (except 2 on the cluster itself). I had more than enough slack. I know the textbook procedure is to unplug everything, but I've had too many plastic clips break on me in the past. That aside, thank you for this video. It was extremely helpful.

[@1AAuto]

Thank you for the feedback! +JeffTheHokie

[@jombeemeanstroke]

This is an amazing pain in the arse to do just to switch out the dash lights, but these instructions are awesome. I've followed and now I know my speed at night. Much appreciated 1AAuto!

[@michaelg.294]

No, at 6:25 he specifically states they're "very easy to replace"!

[@capblueberry]

Y'all have been a life saver...bought an 03 ranger a few weeks ago that needed a few things. Just did these bulbs...thanks for the vid!

[@bgregg55]

At least you don't have to drop the engine & transmission to change one light bulb. So I guess that's good. Well done, Ford engineers.

[@6J3.6J3]

5:36 These bulb sockets simply pop out - after tearing the whole dash apart... forget it, I'll just get another truck 🤣

[@84gandrus]

Was waiting for the transmission to come out next lol

[@thercrv8202]

In other words, remove everything except the tires. Ford, "we thought we had a better idea". Thank you, very well presented and informative. Too bad A1 doesn't work with folks on shipping methods. I have to purchase bulbs on Amazon because they can ship the way I need while I'm on the road, but this video is awesome for the whole process.

[@XJamesKendrick12X]

Thanks for making such detailed and informed videos for so many do it yourself projects! Typically I'm an expert and can do things myself without a video, but occasionally I do Google/KZbin to be on the safe side. It's always y'all's that pops up and I'm never disappointed!

[@darylgolden9528]

You guys made it look easy to change instrument light bulbs. Thanks for video and looking to try this on my 2001 Ford Ranger!

[@haroldalexander5759]

Followed the Video and accessing the instrument panel was relatively easy, however, I decided to buy the LED lights which were great, but forgot that there is a polarity to them and I had no indication of correct way to install. Finally decided to install the lights and plug the panel in and through trial and error, finally got the correct polarity. Put everything back together and IT WORKS! thanks for the video.

[@1AAuto]

+Harold Alexander Thanks for the feedback! We are glad to hear you got this working and back together.

[@enriqueibanez1012]

@@1AAuto do you guys sell led’s instead of regular bulbs too?

[@jerrysdemo]

Thank you guys very much, I needed to replace my instrument lights and the video saved me a lot of time on my own.

[@1AAuto]

+Jerry Wilson Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@acorn2oak90]

Thanks for the help guys! Got it apart and back together in just under an hour.

[@1AAuto]

Thanks for the great feedback! +Zam Fan

[@vickislyanka]

Check the lights before full installation

[@brucehampton1545]

totally agree not sure why they don't stress that in the video.

[@JeffTheHokie]

In daylight it is almost impossible to see them.

[@weeverob]

EXCELLENT video! Especially helpful is the reinstallation process. Thanks so much!

[@JonMichael001]

Thanks. A good challenge. I didn't need to pull every electrical plug and the installation didn't take all that long. Thanks for the video. Good to know where the hidden screws were located.

[@ronaldwarren5220]

A tip for you folks who are not dainty enough to lay under the dash. I laid a small mirror on the floor of the Ranger so I could see to access the hood release bolts. I also replaced all the "black" bulbs as this was not an easy task.

[@1AAuto]

Thanks for checking us out. 1aauto.com +Ronald Warren

[@endtimeswriter]

Thanks, probably the best video on this subject I found. Now I also know where the fog light switch plugs in.

[@joemartin7017]

Great job, thorough video. However.... I'm just gonna buy a 6 pack of stIck-on single LED coin lights and slap one on and call it a day 😂 man that's a lot of work and possible mistakes for a burnt out bulb!

[@RTFLDGR]

You deserve my business for sharing this video with us. thanks.

[@1AAuto]

+RTFLDGR Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@j-man6001]

Got my bulbs in today lol and 5 was what I needed! TY all!

[@1AAuto]

+J- Man Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@haroldalexander5759]

Just some info, I called the Ford dealership to get replacements and they gave me a price of $42 a bulb! Bought the whole set (10) for $15, what a price difference!

[@mdg1089]

wtf. what are the small bulbs! im frustrated no one has them listed or named

[@hockeymike2375]

Wish I could buy you a cold beer! Thank you thank you thank you!!

[@Stover1928]

Very detailed and useful video. Thanks

[@matthewmccalister5594]

What is the type of the smaller bulbs you mentioned for 4wd, high-beam indicator / etc? There are so many and I have been searching far and wide for a simple answer. What type are they? I don't want to have to take the dash out, look, put it back, drive to the shop, take everythign back out just to put in a new bulb. Please help!!

[@michaelfrick212]

this video made it look easy. hope when i do it, I dont wind up with an airbag in my face. i will try to be careful. :)

[@bt4291]

I know I’m two years late. But you sir are smart to think that. And it’s as simple as UNPLUGGING THE BATTERY. Step #1. Biggest oof yet from 1A. Great besides that one tidbit

[@raymondwilcox4997]

You're not doing anything that would activate the air bag.

[@norasanchez2348]

Hi, I am super amazed as to how easy you took & replaced everything back & step by step but can you show me how to do it on a 99 Ford Ranger, stick? Also what's up with the AC unit always dying on these trucks I was told cause mine is not working & i just got it but friend says AC is always an issue. Please advise and help?

[@dennisbattle7875]

Great video, lots of information, but leary to take on this project.

[@joshscott9856]

would it be possible to switch the cluster out for one which has a tachometer? mine currently dosent it’s also a 96 ranger

[@larrygilley7646]

He would be very smart to check the lights before reassembly especially after using LEDs being so sensitive to polarity

[@trentallman984]

Great video, well done.

[@1AAuto]

+Trent Allman Thank you for the feedback and for watching!

[@joeh690]

So is it possible for the smaller indicator bulbs one of them or a couple of them to go bad where one or two of the dash indicators do not come on the dash like the headlights or the Park lights on notification. I ask this because I get the dinging sound when lights are on but it does not show on my dash. Working with an 08 Ford ranger. Honestly I can't remember if it ever has or not shown a notification for these lights. ?? But it works for high beam and fog lights, turn signals, engine light and so on .... ??

[@danielrhodes4969]

This was so helpful!

[@1AAuto]

+Daniel Rhodes Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@OldTimerGarden]

It's not as easy as shown, trust me. It was a real pain to do.

[@bcb6783]

I just use small flash light taped on column to shine on panel at night. Carry extra batteries if needed. :-)

[@MustangsTrainsMowers]

Is it any different for a 2011 Ranger?

[@Shane23Armada]

Do u know if I can put mine in led, I have a 2013 armada

[@michaelfitzgerald1865]

Ok I found the answer in another 1aauto video about cluster removal. The shift indicator module comes out of the cluster by pressing up two tabs. I don't know why you didn't run into this on the vehicle you worked on here.

[@biggreenblob]

5:07

[@EeeDee1]

5:43 I need the tan bulb and socket, do you have those? What size are those sockets, T5?

[@HATEgoo-gle]

WARNING: The big misses on this video: Disconnect the battery so you don't blow a fuse. It took me hours only to end up paying $70 to learn there is a second fuse box. (fine, call me stupid, but we aren't all familiar with this stuff or we wouldn't be here!) It is easier to unhook the transmission indicator from the bottom connection (wire loop on large hook) rather than pinching out the assembly containing PRND21

[@1AAuto]

+Hate goo gle Thanks for the tip! We'll pass this info along to our production team.

[@MrsBuddevil]

Is this the same for a manual transmission

[@zentrikin]

Which lights are the turn signals? I changed out all of the lights to led, even the little brown ones. Every light works except for the turn signals and hazards. The turn signals and hazards work, I can see them flashing when I get out. The turn signals and hazards just don’t light up on the dash cluster when engaged

[@jimleffler7976]

Are those the 194 bulbs? How do I replace the one in the headlight switch?

[@alexdixon5033]

Yes they are 194s

[@MustangsTrainsMowers]

Is this procedure any different for a 2011 Ranger?

[@AdobeFlashTuTs]

When I turn the light on my dash it looks green. Is that the color of the bulb or is it something in the dash cluster that makes them look that way ?

[@josephsavicki9201]

Very informative, but you forgot to test the setup before installing all the screws. Especially if using led replaces, wanna make sure everything lights up correctly.

[@danstricker9928]

I have a 1994 Ford Ranger and this is newer than mine. I think your model years are off, this is the next generation.

[@1AAuto]

+Dan Stricker This video applies to the 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03 Ford Ranger models. Thanks for watching.

[@1AAuto]

+Dan Stricker This video applies to the 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03 Ford Ranger models but could also be applied to other years. Thanks for watching.

[@antoniomontanez4124]

Can I used LED 194 or is there problem with the heating?

[@michaelfitzgerald1865]

Great but what about the shift indicator cable. My 99 I followed your instructions but have run in to an impass with that cable. WTF? I think I broke something and am totally screwed now. I can see the cable and plastic holder a where it feeds into the cluster. When I shift gears now the indicator doesn't work and it won't shift into gear

[@lisapie777]

I have a 1999 Mazda B2500 (same as A 1998 Ranger) and when one of my bulbs burned out the truck let me know! When I start the engine it starts beeping - 5 beeps in a row 5 times. Why was this not mentioned in your video? Just wondering.. Great video by the way

[@OscarGarcia-be4xw]

how would you know which bulb is connected to the signal light. The lights on my 1995 ford are going out in my cluster pretty bad also where would I order them. THank you very helpful video Oscar

[@1AAuto]

+Oscar Garcia

[@paigedemarest6914]

What color are these bulbs are they teal or blue?

[@Angry_Outlaw]

I went through the firewall, it was way easier.

[@577buttfan]

Make a video

[@rowanrelics]

Nope!! Too much to a screw up

[@bobbytudor3788]

I agree I can't see 50 or 60 mph after seeing this video I think I rather paid someone who knows what they are doing LOL then me trying and mess something up.

[@Grannyhauenstein]

What is the part number for the instrument panel bulbs on a 2001 F-150. They are smaller than the ones in this video.

[@VickersGaming]

I ordered blue led lights for my 03 Ford Explorer hopefully this turns out well

[@mcfriedchicken1972]

Vickers25053 Gaming how'd they turn out?

[@danielli959]

Hello I’ve just replaced all the lights in my dash, but they still won’t light up, what’s the issue!

[@musiklyfe7683]

I replaced all of mine with LED's. they looked great! very bright. However, 3 months later, they're now dimming and flickering. i am not sure if it is due to the quality of LED's i purchased (cheap amazon bundle package) or if it is a load recognition issue. For example, i had to buy load resistors for my LED turn signals to cancel out the hyper flashing. I am wondering if this is the same deal. Any suggestions?

[@1AAuto]

+Ian Kugler Thanks for watching. If any of our viewers needs to replace their instrument bulbs, here is a link to the bulbs shown in this video on our website. www.1aauto.com/instrument-cluster-bulb/i/1aimx00187?KZbin&CTA+Comment&IrPgOuSpSU

[@douglasbenoit6718]

Are these the original (incandescent) or the LED? Do you have LED replacement bulbs?

[@MrRockydee07]

Have a Ford 2001 exployer sport trac do you have the LED replacement lights ?

[@McbrideStudios]

When you need to take the whole dash out to replace one lightbulb.

[@jp_travels247]

Why was his steering wheel loose?

[@ChiemyChanga]

There are other orange bulbs on there for the km/h. What size are those?

[@80smusicfan58]

Do you have a video to do this for my 2004 chyrsler Sebring lx 4 dr sedan thank you

[@larrydailey4004]

I have a 96 Ranger. It needs 6 lamps, not the supplied 5. This is more than a little frustrating. Also, I had to bend the contacts on the lightbulbs up slightly for some to connect -- this is not a big deal. Check your bulbs prior to complete reassembly.

[@madelyngrant8300]

hey i was wondering if those bulbs off of your hyperlink will work for an 06 ford ranger xlt? having a super hard time finding them, also is the process the same?

[@1AAuto]

+Madelyn Grant Thanks for your inquiry, but these bulbs will not be a match for your model. We currently do not have any that match up for your model. 1aauto.com

[@84gandrus]

Issue I replaced the bulbs because 3 were blown. I used these new led ones and now everything but half of the speedometer and my battery and oil pressure are lit up. Before this part of the speedometer and tachometer weren't lit well

[@1AAuto]

+Glen Andrus Thanks for the feedback!

[@84gandrus]

@@1AAuto is there something I did wrong with the lights or could they have been defective

[@rustyjoins2542]

On a 1993 Ranger, is there any difference specific to disconnecting the speedometer cable? Thank you.

[@100GTAGUY]

Heck mine has an entirely different oem instrument cluster, has four torx heads and just pulls right out as it's own unit. Just gotta remove the upper wheel panel I still haven't decided to take it on yet as the dash panel cover is quite brittle and on its last legs. So I'm not entirely sure as to how many connectors there are, especially since it's a manual and there's a lot less stuff on the dash.

[@elvinbautista1361]

I have a 2011 ranger and it calls for T10 LED bulbs. But I've ordered them and they are too big? any idea why? Thanks !

[@notimeboy]

What a pita job.Thanks for sharing. I'm sure I would have broken or forced something doing it neanderthal style.

[@1AAuto]

+notimeboy Thanks for checking us out! 1AAuto.com

[@michaelg.294]

Once you've performed this procedure you will realize how much editing went into this video to remove all the curse words.

[@bradfordeaton6558]

should I add dielectric grease to connectors?

[@1AAuto]

+Bradford Eaton You do no have to

[@jwillathekilla]

My cluster went out but so did the ac control lights. What could the issue be? I checked fuses and they look good not sure what else to look at.

[@1AAuto]

Thanks for checking us out! There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. +Josh Willer

[@ericdouglass1995]

It's FIVE bolts on the knee panel !!

[@fiestatacotime4124]

So how would I fix the oil pressure needle? In order to make sure I'm getting the right pressure. It's currently buried underneath the guard

[@natwsrable]

common problem, i fixed mine using a very strong magnet you can spin it back around to the correct side of the needle, there is a how to video on youtube.

[@devonguh28]

Grab a oil pressure sensor from ur nearest auto parts store

[@johnnada586]

xTRuE Marshie use a magnet, there is a KZbin video where a guy does it,

[@zanzibarbungalow3386]

Get a seperate gauge

[@kylebecker2516]

What size are the bulbs?

[@charlesjenkins5087]

Great instructions but what a total pain in the backside. New vehicles are ridiculous for things like this. I guess I won't be changing mine out just yet. Will have to wait until more bulbs burn out before I take half the dash apart just to replace bulbs.

[@1AAuto]

+Charles Jenkins Thanks for the feedback!

[@BidCrushr]

My check engine bulb needs to be replaced on a 1999 Ford Explorer XLS 6 cylinder. which bulb type do I need?

[@1AAuto]

+BidCrushr If you remove the bulb it should have a part number on it that you can match up. Hope this helps you out 1aauto.com

[@bria6094]

and no part # on those little ones

[@jacobog3221]

Anyone know if i can replace my bulbs in my instrument cluster to LED’s? I have a 93 Ranger that im restoring

[@BidCrushr]

What bulb size is needed for the check engine light of a 1999 Ford Explorer? I want to have it handy before removing the cluster rather than look at it once removed then have to wait till i can order it from 1A Auto to completed to the job

[@1AAuto]

+BidCrushr Should be a 194 bulb size for your vehicle! If you need the bulbs with the new bases please click the link! www.1aauto.com/instrument-cluster-bulb/i/1aimx00187?KZbin&CTA+Comment&IrPgOuSpSU

[@bria6094]

194 is the bigger black one for back light. he needs the smaller grey base bulbs for the indicator lights or warning lights

[@chrisluongo5270]

good job

[@garrison8108]

I have a safety addition that I'm sure you guys did but didn't announce to us. Please remember to engage the parking brake before putting in 1st gear. You don't want to roll out the drive way while you're working on your truck!

[@michaelmatthewkomaromigabr9588]

how long should it take to replace the bulbs?

[@Angry_Outlaw]

11:56

[@uptownsfinest1598]

Ok you're changing the lock and bulb because I tried pulling the bulb out and definitely couldn't

[@RRack]

Why remove the knee kick panel?

[@michaelg.294]

It's to get to a screw just below and to the right of the steering column (3:14). I just got done doing mine 10 minutes ago, and boy was it FUN! Zero leftover screws which was a shocker.

[@timprice770]

How about a 95 ranger?

[@bigstick5278]

It must be done but what a PITA..

[@Silverado1222]

Do you have to remove all the connectors and radio just to get to the one bolt hidden by the radio panel?

[@DerekLFoster]

Yes

[@davidgoodwill4865]

That is NOT the dash of a 93 ranger, why include it when the title says 93 Ranger bulb replacement.

[@youtubecrazy6438]

As a matter of fact they didn't even start using that dash style untill 95. Guess there thing to get more veiws.

[@seanfaraday6369]

Transition year

[@seanfaraday6369]

Like my 97 F350, there is a 97 f350 OBS and a 97 f350 where they transition body styles

[@kingsirois2706]

Can someone tell me the size of the bulb

[@1AAuto]

We do not have this information available. You should be able to pull this information up in the Haines manual. +xXKR3W1069 Xx

[@Tripoutwest2024mandm]

Twos or 194

[@therubberduck1165]

Cant i just remove the motor and transmission and take the body off and leave the instrument panel in.🤔 Edit; i found a old lamp at the dump and bought a inverter and shoved the lamp under the dash and used 14 zipties to secure it. Then i got a light switch for a outside flood light and used a sawsaz to cut a hole in the roof for the chord. It was so easy.

[@manuelgarcia1103]

You literally skipped how you put in 👀 I seen in 8:02

[@bennetterfield5720]

Really stuck at 5:08

[@masterblaster1676]

I guess ill just tolerate the dinging

[@jamesbernard9998]

Replaced bulbs only

[@UPLINKUSA]

Your kit has 5 bulbs but cluster has 6.

[@coltoncorson1607]

My 93 ranger dash isn’t like that

[@joelbritt2794]

you replaced 6 bulbs, but only sent me 5 in a set have a 95 std trans, will see when i remove...

[@joelbritt2794]

ok. finished. 1 - need six in my 95 ford ranger - just like the panel in the video why sell packs of 5 for $35? - $7/bulb assy 2 - if you have oem sockets and bulbs to replace, get the panel out (multiple videos on youtube to demonstrate), remove the plastic socket (as shown in video), attempt to remove the bulb from the base (pull straight out) CAREFUL THIS IS GLASS!!!! if you CAN remove the glass bulb from the base... 3 - buy three 2-packs (194 sylvania long life bulb) from auto parts orange zone or that green and white irish place ($7 per two-pack), install the new glass bulb into the old plastic base, and replace your REPAIRED assembly back into your panel. one simple extra step, half the money, purchased locally, no waiting for shipping I wouldn't be telling you any of this if 1A Auto sold a set of 6 instead of 5. EVEN IF YOU BUY BULB AND SOCKET ASSEMBLIES DO NOT THROW AWAY YOUR ORIGINAL PLASTIC BULB BASES** NEXT TIME YOU REPLACE GET SIZE/TYPE 194 SYLVANIA for half the cost - swap out the bulbs yourself like a real man, save money like a real man, got to the auto parts store like a real man

[@TattooedRobot]

"easy to install" feels like a bit of a stretch.