How to replace Knock Sensor 2002-06 Toyota Camry

Buy Now!
New Engine Knock Sensor from 1AAuto.com 1aau.to/ic/1AEKS00032
A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes. This video shows you how to install a new knock sensor in your 2002-06 Toyota Camry.
• Check here for more videos on the 2002-2006 Toyota Camry • Toyota Camry 2002-2006...
This process should be similar on the following vehicles:
2002 Toyota Camry
2003 Toyota Camry
2004 Toyota Camry
2005 Toyota Camry
2006 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ofQ/1AXAA00013
• 10mm Socket 1aau.to/oeN/1AXAA00017
• 12mm Socket 1aau.to/ofw/1AXAA00015
• Bent Nose Pliers
• Ratchet 1aau.to/of7/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/odk/1AXAA00044
• Paper Towels 1aau.to/oap/1AXSS00035
Subscribe: / @trq
Check out our playlist:
Toyota Camry 2002-2006 5th Generation: • Toyota Camry 2002-2006...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@misstrKevin]

Where is the knock sensor in bank 1? I cant find anything about it anywhere just the one youre working on here. This one is bank 2 correct?

[@robbietrumpet]

Super good video! It turned out, I just needed to replace the knock sensor PLUG pigtail. Like in most older Toyotas the little snap keeper tab had broken off.... I replaced it with a fuel injector plug I had on a different old harness for the same car, it worked perfect... I first tried to solder it in but noticed there was too much white dusty stuff in the wire tried to clean it and lots of flux I didn't like the way it looked...so I went ahead and used cold connectors... But this was a great video with the torque settings... Thanks

[@cyndylewis8520]

Well you make it look so easy, my check engine lights on and it needs to go pass smog right now so I don't know what I'm going to do cuz I can't afford to pay someone to put it in

[@peaceineachsmile3871]

are both knock sensor the same? Did you replace both? Thank you for sharing!

[@forestskylove]

Wow!!! You are quality oriented and I wish I could have you as my mechanic due to your high quality and clarity. GREAT post Sir!

[@TRQ]

+Forest Sky Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@audiorat1]

Can this be done from underneath? without taking out the intake manifold?

[@yvonodnice7469]

Very nice 👍. Good job 👌 keep helping us.. I wish that I could be your neighbor 😅😅🤓.

[@thehardestworker69]

Very informative n step by step now that's how you make a diy video

[@RobertLabrador-nb4dh]

If you notice at the 4:55 mark skips the part of pulling intake past the bolts. My intake doesn't slip off. Is there something else you are not showing to move so I can get the intake past the bolts? I point out the time stamp because it skips forward.

[@adamgallagher6869]

Is this the same process on a 2006 toyota solara sle?

[@anthonytardiff573]

Nice job

[@GustavoMartinez-ri4jy]

What torque wrench are u using

[@qm4954]

Thats awesome 👏🏾

[@rodrigorangel692]

does anyone know which knock sensor I should buy for 2004 Toyota Camry 2.4L?

[@bonnon0brian]

Is this bank 2 sensor?

[@Plaubel17]

How long does the whole repair takes ? Hours ?

[@fernandoaguirre642]

Mi carro presenta q cuando está frio no agarra drive ni 2 ni L pero cuando calienta trabaja normal

[@fernandoaguirre642]

Q falla produce ese sensor de transmisión

[@HM-ke1qm]

Why the hell did toyota put it all the way down there?

[@noahpepo538]

2 more bolts underneath, proceeds to not show bolts

[@_mikishi_]

Yeah, I was looking for that too. Had to rewind to see if I missed the part.

[@christopherkivett9094]

exactly my thought and that's why I'm giving a bad review. straight garbage

[@jordasaurus_rex]

This is the part I’m stuck on on my car, I can feel 4 bolts and he doesn’t say what size socket nor which bolts they are

[@jaycris1980]

Guys watch the entire video. He actually shows it towards the end. Easy to locate.

[@willsoonmarc8711]

For those wondering.Its way down there so you will pay them yo fix it.