Thanks for saying that about the washers only being on left side. KTM parts schematic only shows the one side, so I'd assumed the other was a mirrored setup, but no. Thanks for clarifying! Wondered if I was shorted the parts in the kit I bought!
@tommywallbanger4 жыл бұрын
Thank you for taking the time to make this video sir. The steps you provided and tips you offered are well appreciated. Thanks for having the will power and dedication not to run out at 6:24 and flag down the ice cream man. You're a trooper.
@lassivaatamoinen5468 Жыл бұрын
I did seal installation the same way. Just a tip: on the chain side, you might want to put in the inner sleeve after the washers, BEFORE pressing in the seals. I did not put the sleeve in for pressing and the spacers got offset a bit, so the sleeve sits a bit tight. Still able to push it in by hand, but requires some force...
@HugoStiglitz10006 жыл бұрын
for the guys who don't have shit laying about nevermind.....this was the only vid with 2 bearings per side. thanks
@jnavonoD Жыл бұрын
Cheers for this, just ordered one of your tools.
@muttebarker95445 жыл бұрын
Where can i buy this tool? The website mentioned in the description seems to be offline.
@josemutia78473 жыл бұрын
Morgans tools usefulness..thanks KZbin
@MarkDe-e6sАй бұрын
Where can you buy the tool? I have tried the web site address without success? Thank you, Mark
@egar1m3 жыл бұрын
thanks for this video! I see that there are number on one side of the bearing, you wrote "facing against washer" so that mean that always facing to external correct? thanks
@paulbolding8822 жыл бұрын
Useful vid cheers 👍
@PTG8476 жыл бұрын
Question- Is it normal for the right side to have some side to side play when the final barrel is installed? Thanks
@RichLaffertyRacing4 жыл бұрын
awesome video...great tool
@nicholaschase298 жыл бұрын
Is that an ice cream truck I hear!
@braapptorrr46306 жыл бұрын
Does Ktm only use that outer seal and not a dust seal as well
@tjtharp243210 жыл бұрын
Great video Thanks!
@micksteward2957 жыл бұрын
ha just wondering my linkages I'm trying to get bolt of the frame its loose and turns but still won't come out will heat help get it out with centre punch
@jefframirez53956 жыл бұрын
Had the same issue on my 2014xc used bb blaster soaked hit it with a big pointy punch On a weird angle end up taking brake off
@connorallen51504 жыл бұрын
What happens when you have rusted to shit bearings
@cindygliterwhip7 жыл бұрын
Where could I buy the tool you're using ?
@richardmorgan92647 жыл бұрын
www.morgans-tool.co.uk on the "How do I buy one?" page
@RickyDove9 жыл бұрын
How would I get hold of this tool please
@richardmorgan92649 жыл бұрын
Making more now. will be available on ebay from monday 9th march.
@fernandobiondi12568 жыл бұрын
No GREASE at all on this procedure? Guess you'll be using that tool pretty often!! ha ha
@jeffreysisti66537 жыл бұрын
Fernando Biondi I saw him grease but he didn't explain a dam thing.