how to replace left main dipped beam bulb on Ford Fiesta 2009

[@fredneedle123]

Thanks Taj. All the other videos have said to remove the entire light to replace the bulb. This is the only one so far showing it can be done without taking the entire thing out.

[@tusux2949]

It can be done but it is very difficult, especially if you have fat fingers. After cutting myself several times trying to do what is shown in the video, now I just take the whole assembly out and replace the the bulb that way. It's easier and less painful. Would it have killed them to leave some more free space to work there ?

[@muhammadhamid9719]

Yup if you have fat fingers it's a bit of issues butt it worked for me ❤

[@XhevahireHajrullahu]

It is way esier if u take the entire light

[@santos122122]

Very easy and straightforward. Thanks.

[@TajMotorMedics]

Thank you 🙏🏽

[@G74HorHal]

After being ignored in Halfords I thought why not give it a shot, so thank you, you have saved me £18 x

[@timjules]

Brilliant thank you! Quite agree that you don't need to take unit out - took me 5 minutes after watching this

[@desmondeguavoen4418]

This was so helpful to me this morning. I just fixed mine by myself after watching this video.

[@TajMotorMedics]

Perfect! 👌🏼

[@millymucci]

thank you! very simple and easy you made it, much appreciated.🙏🏼🙏🏼

[@OzzySafa]

Is this the light that comes on briefly when you lock and unlock your car ? I can’t work out which one it is

[@candyguy05]

thank you just changed my bulb in less than 5 mins saved me trip to halfords and 10 pounds

[@muhammadhamid9719]

Just loved it saved me time and money thanks

[@gmcfa002]

Many thanks. I too thought the whole light had to be removed now I know better.

[@ryanes77]

What bulb you use for high beam? H7 too?

[@TajMotorMedics]

Hi, I think it’s H1 single pin but you can check by removing the back cover for the high beam and see if it’s single plug. Thanks 🙏🏽

[@sorrytopart]

Thanks for your time to put up video...helped me a lot.

[@keeskip4589]

Thanks for the easy to understand video.

[@samkakar7143]

Very useful thanks, just my cars left main beam bulbs stopped working going to change it now

[@paulj.plaster1465]

Have same model.....but manual says to undo headlight screws, disconnect the electric terminal from headlight....remove WHOLE headlight......THEN do as your video has shown. Was this the same in your manual?? Tomorrow I'll give your method a go. Can't get the electrical connection undone no matter what way i try to release it.

[@TajMotorMedics]

Hi I didn’t read the manual just took the unit out sometimes the connection are a nightmare but will get undone, spray some wd40 (maintenance spray) that should help too. Thanks

[@maszkalman3676]

My work car have 2 torx bolts in the dipped beam mousing so i can't turn out the housing you just did.....

[@virajprasanna2396]

Good video

[@TajMotorMedics]

Thanks

[@bourbrainium1818]

Quality vid lad

[@TajMotorMedics]

Thank you 🙏🏽

[@ahmadakhalid50]

Thanks sir !

[@tartanblackcountrytourist]

Thank you My friend..:)

[@fhchcvfg2311]

Useful many thanks

[@Driver-oq2ol]

King