How to replace MERCEDES SPRINTER Gear Cables | Roadside Follow along guide NO SPECIAL TOOLS NEEDED

Рет қаралды 9,371

Күн бұрын

Пікірлер: 21

@terryhenderson556 15 күн бұрын

hi, I'm currently having the same issues with my van, an 11 plate sprinter, 447,000 plus miles, you mention in one of your comments ( The biggest change was replacing the gear selector bush ) was changing the bush easy enough, currently sat waiting for rac to come do a diagnosis at home, meant to be going away on 20th so hopefully an easy fix

@beaulunaedvantures 15 күн бұрын

Hi wow some great mileage you have on yours. Changing the bush was easy enough, the hardest bit of that process was removing the actual gear knob. It may be better if you can find a replacement gear selector mechanism. I replaced mine with a low mileage one which was more expensive but it meant everything had very little wear on it. If you want to keep the price low replacing the bush also worked, it just took a bit more effort. If you check the other videos on this channel you’ll see the full range of replacing the; gear linkage cables, counterweight, entire mechanism, selector bush too. I hope they help and you get it sorted. Just got back from a 5500 trip in ours with no issues at all, so once the gear selection was sorted it’s all working well with the 274,000 miles 👍

@beeksy82 5 ай бұрын

Thanks for this mate top job !!! Hopefully my Vito is similar?!?!

@beaulunaedvantures 5 ай бұрын

Fingers crossed. Cheers for the comment, couldn’t find anything on KZbin when I did mine so I hope this video helps. Good luck 👍

@markg99 10 ай бұрын

I was listening to your instructions and I took the gear box out. Can you do a video on how to put it back in please? 😅

@beaulunaedvantures 10 ай бұрын

Hey up mi duck🤣 if you take the gear box out you just need a really really big hammer to get it back in 👍🔨

@julianreynolds 10 ай бұрын

Nice job, looks like it was worth the effort and not too complicated. Did you use a genuine Mercedes part (expensive) or was it an aftermarket item. Keep up the great content.

@beaulunaedvantures 10 ай бұрын

Hi again! Yes I did use a genuine replacement cable, however it wasn't new. It came with the second hand gear mechanism I bought from eBay recently and replaced on the van in the last video. It was more to see if there was any difference on selecting 2nd gear, but I'm coming to the conclusion that there is gearbox damage causing that issue. It is only really slight and not geting any worse so I'll live with that for now. How is your repair/adjustment of your gears holding up? And where are you looking to head to next?

@aberdeendeltaforce 4 ай бұрын

Hi thanks for the upload, it’s been very helpful, I was wondering about the plastic parts at the end of the linkage that push fit on to the gear box under the van. Did you use the old ones as the linkage I’m thinking on buying from a MB dealership doesn’t appear to have these plastic push on clips supplied according to the picture? Thanks again 👍

@beaulunaedvantures 4 ай бұрын

Hi David, the black clips at the gearbox end came with the secondhand cables I bought, but I know they are not included when buying the cables from main dealer and need to be bought separately. If you ask at the Mercedes parts desk they will be able to give you those too. Just out of interest have you a price for the new cables from MB? Rang them recently for a price of a rear light cluster and meant to ask then but forgot

@beaulunaedvantures 4 ай бұрын

Just found the part number for the black clips - Mercedes Sprinter 6 Speed A9062680166 you’ll need two of them as they are sold separately 👍

@aberdeendeltaforce 4 ай бұрын

@@beaulunaedvantures nice one thanks, I’ll ring them up and see, if you go online now western commercial MB dealer currently selling linkage cable set for £97.20. 👍

@aberdeendeltaforce 4 ай бұрын

@@beaulunaedvantures that’s great, thanks for the part number, I actually have a 2014 VW crafter but it’s a rebadged sprinter, only difference is the engine and front face styling, everything else including gearbox is the same. 👍

@beaulunaedvantures 4 ай бұрын

@@aberdeendeltaforce Thanks very much that’s really helpful. Good luck if you give it a go 👍 I’ve very little experience with this sort of thing and found it pretty easy going

@mwright555 6 күн бұрын

Hi, when I bought the cables from MB they didn't come with the press on parts at the gearbox end, so ai attached the old ones, but when i put it all back together the gearstick won't move over to the fifth/six position, would you have any advice?

@beaulunaedvantures 6 күн бұрын

Hi, I’m not sure why that would be to be honest. Wonder if it might be worth getting a pair of new ones from MB to see if that is the cause of the issue with 5 & 6

@bobbyedwards6144 9 ай бұрын

Hi, just found your channel, I have a 2014 sprinter by myself and the gears are very stiff. Did you find a big improvement after the cables and oil change? Thanks

@beaulunaedvantures 9 ай бұрын

Hi, thanks. Same year as ours 😁 we were having major issues trying to select gears, mainly 1st, 2nd and reverse. The gear lever would have to by rammed into these gears and crunched into them. The reverse lights and camera would come on trying to select 1st gear and going through the gears was a pretty miserable experience. The biggest change was replacing the gear selector bush in the dash mounted gear selection mechanism (that’s what I call it anyway). Changing the gearbox oil made no real difference on our van, but it was good to do for maintenance I think. If your having issues with stiffness selecting all the gears I’d say the cables would be a good place to start for sure. And changing the gearbox oil is a relatively simple procedure so might also be worth a go too. Let me know how you get on 👍