How To Replace Nissan & Infiniti Spark Plug Tube Seals

[@chelle315]

I have the same stupid valve cover on my 09 Maxima, this worked like a charm. Thanks for figuring this out!! Car companies are turning to non serviceable valve covers which will phase out these seals. I guess we'll all have to visit the plumbing department at Lowes when that happens!

[@hardlymovingpro]

Glad it helped and worked out for you!

[@rodboijones7390]

Yes they are trying to make you go to the dealer for everything.

[@hardlymovingpro]

You said it!

[@shawncampbell1692]

What year Honda, civic or sport club seals? Do I need to ask for what year is the honda civic

[@IvanPerez-dv5et]

Your videos are awesome. You show all angles and explain everything well. Keep up the good work

[@hardlymovingpro]

Thanks for your comment and support. It takes a lot of work to put these videos together but comments like yours keep us motivated.

[@thewrenchmaster122]

What year make and model Nissan was this and engine size ? And also what Honda tube seals did you use ?

[@nuddahundo83]

Great idea because Nissan designed those things and they are flawed you can buy new valve covers eventually the oil will still seep past the gap.... Thumbs up for the creativeness.....

[@hardlymovingpro]

Thanks!

[@louieralphfernandez4533]

Thanks for your video sir, it helps me and save money rather buying a whole valve cover. More power

[@hardlymovingpro]

Good for you!

[@tuyenn10]

hey I needed to replace the spark plug seal on 04 infiniti fx35, what is the honda part # for it. thankyou for help

[@hardlymovingpro]

A link to the part is provided in the description of this video.

[@jamesdennis3249]

What year honda was those new tube seals im doing mine this weekend this will help me instead of getting a whole new valve cover

[@hardlymovingpro]

2010 civic

[@howboutthis2110]

Hey so I read ur description I bought 2 packs using both types of seals that came in the pack did u use both types or jus the one the fits snug?

[@hardlymovingpro]

Ones that fits snug over the spark plug tube. Use RTV to hold in the valve cover.

[@LizzyinJupiter]

I watched your video, I truly enjoyed it, thank you for the knowledge. What kind of car are you working on in the video. I want to try this on my 2008 Infiniti G35. Do you recommend.

[@hardlymovingpro]

Thanks! Infiniti M45. Repair procedure might work on your G35.

[@LizzyinJupiter]

@@hardlymovingpro I looked into the 2010 Honda Civic "grommets", but venues ask for type...DX, EX, LX, etc. Can you provide the information?

[@hardlymovingpro]

@@LizzyinJupiter can't recall. Maybe dx

[@RichardMLowe]

@@hardlymovingpro is this applicable for a 2012 Altima

[@joeysworldtour1004]

Did this exact fix on my 03 Pathfinder and and so far it’s holding up man thank you so much. How long has it been holding up for this valve cover? Also my car now has a slightly rough idle any thoughts? Thanks

[@hardlymovingpro]

Did you check the spark plug gap?

[@vonstervon4407]

Going to try this! Question, can I just replace one seal or should I replace all 3 spark plug tube seals?

[@hardlymovingpro]

Best to replace all the seals.

[@Eric-kz2rt]

Im trying to do this but the Honda seals are so snug im having problems getting them to slip on the spark plug tube. What exact 2010 honda civic seals did u guys use?

[@hardlymovingpro]

I went to my local auto parts store and did a mix and match to find the right size.

[@Addydaddy187]

I have a 2003 m45 Infiniti v8 can I use 2010 Honda civic tube seal

[@hardlymovingpro]

Yes ... I think that'll work.

[@Qkfltpdls777]

Could you take a look number 1 and 2’s spark plugs if there’s any leak afterwards?

[@hardlymovingpro]

Customer hasn't come back with complaints.

[@Qkfltpdls777]

@@hardlymovingpro or most of customers don’t know how to check spark plugs?

[@hardlymovingpro]

@@Qkfltpdls777 no more misfires

[@Mvelardi07]

be very careful guys, the m45 infiniti valve cover is similar but the tube seals are DIFFERENT… THIS WILL NOT WORK on the vk45de engines… you can do something similar with the same civic part but it’s a bit more sketchy, go slow with a dremel and use a lot of hondabond and u may be ok

[@hardlymovingpro]

Good to know and thanks for sharing!

[@adrianfigueroa8721]

I have a infiniti m45 2006 what seals can I use

[@ricardohernandezmora]

But which honda engine K20Z3 or R18?

[@hardlymovingpro]

Believe it was the 1.8

[@TheKidaldrin]

What size were the seals that you need? I’m going to attempt this job on my Altima.

[@hardlymovingpro]

Recommend you bring your valve cover to a local parts shop and try to match up the seals. I used seals for a 2010 Civic.

[@TheKidaldrin]

@@hardlymovingpro yes thank you I will keep that in mind

[@GhostOfBrickCity]

I'm planning to do this, this week! thanks! does it work same process and civic sizes on a 2007 g35x sedan vq35hr motor????? i was planning on buying new valve covers with so many to choose from and so many bad reviews on every single place i look online and ridiculous dealership prices i might as well try it myself. good project..

[@hardlymovingpro]

Sorry ... can't say since I haven't worked on the G35 series. It'll be more like trial and error. Take out one old seal and bring it to your local auto parts store to do a match up.

[@GhostOfBrickCity]

@@hardlymovingpro ok thanks

[@christapia9495]

Hey there did you end up doing this method? If so how has it been holding up any leaks? I too plan on trying it out on my Vq35hr Z

[@temiromeo7195]

@@hardlymovingpro hey did it work for you or what method did you do pls reply thanks

[@temiromeo7195]

Hey did it work?

[@losc4927]

Hi I recently replaced my tube seal and did as you did but I'm still having a misfire on that cylinder there's also a smell of gas/fuel when I start the car any suggestions? I also check spark plugs Ignition coil Fuel injector

[@hardlymovingpro]

Did you replace the coil pack or at least swap it out with another coil pack from a different cylinder?

[@skrtskrt3429]

Did you ever figure it out?

[@OJesusX3]

My goodness friend! That thing is really in there! 😊🌎🌟

[@hardlymovingpro]

You said it!

[@trailslug893]

I just bought the OEM valve cover for the 2.5L and new gasket for $53 - 13270-JA00A 1 $ 9.05 - Engine Valve Cover Gasket 13264-JA00A 1 $ 43.64 Engine Valve Cover

[@hardlymovingpro]

Good deal!

[@danielsalgado3319]

Have a 2015 nissan quest do you think this will work.

[@hardlymovingpro]

Won't know unless you take the cover off and then find replacement seals that fit.

[@nuddahundo83]

What type of Honda did you order the seals?... I'm going to do the same things to mines

[@hardlymovingpro]

2010 Honda Civic.

[@fredrenault3855]

Are the seals supposed to come from a base model r18 civic or a Si k20 civic?

[@hardlymovingpro]

Can't say. What I did was to take the cover to a local auto parts shop and opened different boxes of seals till we found ones that fit. I also measured the diameter of the spark plug tube so that the inner diameter of the seals would seal around the tube.

[@fredrenault3855]

@@hardlymovingpro so then how do you know it's from a 2010 honda civic?

[@hardlymovingpro]

That's what the auto parts store cashier got for me.

[@Yourdoc1]

good video!. What year and model infiniti is this on?

[@hardlymovingpro]

Thanks! 1997 I30 (which is based off the Maxima).

[@jamessalvia4839]

with the civic seals were they nice and tight around spark plug tubes? I have 117k on my pathfinder, at what age do you feel seals may need to be replaced?

[@hardlymovingpro]

Yes .. the seals fit fine. If or when you pull out the ignition coil and there's oil on the tube's connector, then the seals are leaking. Haven't seen this problem on the pathfinder.

[@hepzlawrence7710]

@@hardlymovingpro would you need to replace the coils aswel or just clean the oil out? And what Honda are the seals from?

[@hardlymovingpro]

No need to replace the coils. 2010 Honda Civic.

[@jedpulvera3558]

is rtv enough to hold the seals?

[@hardlymovingpro]

Yes.

[@crxdelsolsir]

This is a text book example of planned obsolescence, a method Manufacturers are making more money. By integrating parts (usually removeable for maintenance) they boost sales by making you buy more than what you want. In this case rather than just buying the seals Nissan has made you buy the whole rocker cover (only to do it again after a few years). Japanese are usually very honest (by their culture) and either have little to zero planned obsolescence. But Nissan is no longer Japanese, it is half Renault owned by French in europe which is not bound by the same codes which explains why Nissan is now doing this. Honda is still Japanese hence the Civic seals are what they are just seals, not locked into the rocker cover or heaven forbid the rocker cover is welded shut onto the head to make you buy a whole head just to replace a seal. Manufacturers are slowly conditioning and removing what it was and should be (seal replacement only) from living memory.

[@hardlymovingpro]

I know. I hear you. Which is why I had to come up with a way to replace those seals. A new valve cover with new seals were not available at any Retail Auto Parts suppliers. So I check with the dealer and they wanted a couple hundred dollars. Can you believe it? And the replacement cover is made out of plastic, not even aluminum alloy like the old days.

[@josephb3899]

So a 2010 Honda civic plug seal fits 2005 Titan 5.6 v,8

[@SirKurogane]

The funny thing is the newer honda valve covers are exactly the same so your point is invalid lol

[@crxdelsolsir]

@Rawkfist1501 You have no idea. You won't even know it if you see it as you have no idea.

[@crxdelsolsir]

@Rawkfist1501 Replacing seals on a Honda (b16 b18 f22 h22 powering virtually all Honda) once the valve cover is off is literrally only seconds. Buying a whole valve cover just for the seals does not make it any easier. You have not replaced seals on a Honda otherwise you would know your argument fails. As I said you do not know what you are talking about.

[@abeldubon9120]

Can I use the same Honda grommets for a Nissan Frontier 4.0 V6?

[@hardlymovingpro]

I think so with a 2010 Honda Civic seal -or- measure the interior and exterior diameter of the old ones and go to your local auto parts store to find a match.

[@darwinsanchez3617]

Hello what year of honda civic??? I have the same problem but need more info on the valve seal.

[@darwinsanchez3617]

Please answer me asap.

[@hardlymovingpro]

2010

[@abumannocchi]

Do we need to add to atv seal or no just asking

[@hardlymovingpro]

Use RTV to seat the gasket to the valve cover

[@abumannocchi]

@@hardlymovingpro my cars not exelerating what should I check

[@hardlymovingpro]

@@abumannocchi too much to recommend. Start with check engine light codes

[@abumannocchi]

Multiple misfires plus 02

[@hardlymovingpro]

Start with new plugs. Then perhaps new coil packs

[@bemartythree6589]

Great pinch idea, but the math and hassle wouldn't work in my favor. I would need 12 tube seals and they are about $25 for 8 seeing I need 12 that's $38 and I don't own a dremel. Also good chance I could damage the Valve cover seal seats cutting into it and a pair of new Valve Covers with factory seal tubes is $50 Ebay. But in a pinch this is an awesome idea!

[@hardlymovingpro]

Be careful with Ebay vendors. Could be Chinese knock offs that may not fit properly or the plastic doesn't last (can't take the engine heat).

[@adanreyes4430]

They are about 15$ each yeah to save a little might be good if it works

[@jamessalvia4839]

refitting the cover was it easy/hard to get the seals over the tubes?

[@hardlymovingpro]

Easy.

[@adlerxiloj9005]

This is my third time replacing the valve cover on infinity fx35 🥲. Still leaking from tube seals. What is the part number for the tube seals?

[@hardlymovingpro]

Don't have the number. May be cheaper buying a new valve cover. Their prices seem reasonable on Ebay.

[@adlerxiloj9005]

Will these tube seals in the description work for a 2003 Fx35 aswell?

[@AbdullaJaafari]

I can't seem to find Fel-Pro products where I am on the other side of the globe. Do you know if there's a Honda part number for the seals you're using?

[@hardlymovingpro]

You can do a google search on a Honda dealer that sells on-line. Their website should have a parts search engine.

[@AbdullaJaafari]

@@hardlymovingpro Found it after a long search. It's 12342-PCX-004.

[@hardlymovingpro]

@@AbdullaJaafari Good for you!

[@mejjjon2245]

Can the valve seals of Honda will work on 2005 infinity fx35

[@hardlymovingpro]

Can't say.

[@adrianfigueroa8721]

I have a infiniti m45 2006 what year are the seals for the civic

[@hardlymovingpro]

More and more aftermarket parts retailers are selling a new pair of valve covers with new seals and gaskets for under $100. Believe that's you easiest option IMHO. Check out Amazon.com

[@lebronjordan802]

How was the fix? Did it hold up?

[@hardlymovingpro]

Customer hasn't complained so I guess it's working.

[@dnotoriousb889]

Awesome i want to do this. Are the civic seals still holding up. And how did you discover that the seal from the civic would fit correctly. Thanks man

[@hardlymovingpro]

Haven't gotten any negative feedback from the customer. Had some extra seals lying around for the Civic and it worked.

[@GhostOfBrickCity]

@@hardlymovingpro any idea what other cars might fit as well if the civic ones are not in stock

[@jerryford3379]

What year civic were the seals for? Currently working on this. Want to make sure I buy the right ones

[@hardlymovingpro]

2010

[@petert696]

@@hardlymovingpro which honda engine type k series etc? Thanks

[@arshmann786]

I have 2004 nissan Altima, will it works on this

[@hardlymovingpro]

It could work.

[@alejandroramirez-xp5jk]

Hi do you know if the valve cover come with the seals when you buy it

[@hardlymovingpro]

I've never seen a Nissan valve cover gasket kit with replacement seals. I guess the manufacturers figure if the seals are worn, you need to replace the valve cover ... unless you come up with your own way to replacement them ... like in this video.

[@cedricmiller4370]

@@hardlymovingpro whenever the Nissan spark plug tube seals are worn will it cause ticking noise during acceleration?

[@Kyle_gallegher]

I heard a guy say his coil packs didn't fit after can anyone vouch this works and everything still lines up and bolts up?

[@hardlymovingpro]

The coil packs fit into the spark plug tubes. The tube seals, which wrap around the tubes, does not interfere with the coil packs.

[@Kyle_gallegher]

@@hardlymovingpro ok I'm going to give it a try. Bought oem honda seals and infiniti gaskets and good rtv so guess the rest is up to me, if it doesn't get me a few more months ill just buy from z1 😅

[@Kyle_gallegher]

@@hardlymovingpro hey so I actually purchased the seals. There seems to be two variants of them inside the 8 pack I bought?

[@budolyf7614]

What 2.0L 2010 honda motor are these for 4 cylinder or 6

[@hardlymovingpro]

4

[@jessesantos3114]

Do you know what engine were the seals for

[@hardlymovingpro]

2010 Honda civic

[@GhostOfBrickCity]

@@hardlymovingpro do you remember what model civic. (example ex,etc?

[@Mj2335]

So how well did this work out?

[@hardlymovingpro]

No customer complaints or customer "come backs" so far. Work was performed to fix a cylinder miss fire problem caused by oil getting into the coil pack tube.

[@gerardoc5840]

How has this been holding up?

[@hardlymovingpro]

No problems to date.

[@chrissannes1348]

Im having this issue. Ordered these same part number at the parts store. They were 21 and 38mm. What am i doing wrong here? They were felpro

[@hardlymovingpro]

You used the 2010 civic seals?

[@chrissannes1348]

Yes. They were labeled fuel injector something seals tho.

[@hardlymovingpro]

@@chrissannes1348 Should be "valve cover spark plug tube seals".

[@chrissannes1348]

Ya thats what i thought. The other ones i have that are to big say that. Idk if maybe 2 packs were mis packed or what

[@chrissannes1348]

I ordered another set of 2010 civic tube seals. Same. To small 21x38mm. Same part number same valve cover. Are u sure those are the year make of the seals u used? Thats the 3rd set iv ordered that were wrong. With the same part number u provided. Jus trying to figure this out.

[@caylemsepeda4845]

Can anyone tell me where the seals are on a 99 gt mustang 2v 4.6 the spark plug dosen't go through the valve cover

[@josemarrero9878]

What honda seal for a Nissan Pathfinder 3.5 ....2003

[@hardlymovingpro]

Can't say

[@GhostOfBrickCity]

can you tell me what year and model is this valve cover

[@hardlymovingpro]

Think is was for a 2007 Infiniti with a V6.

[@GhostOfBrickCity]

@@hardlymovingpro g35? vq35hr? de?

[@hardlymovingpro]

@@GhostOfBrickCity It was some M series I believe.

[@GhostOfBrickCity]

@@hardlymovingpro GREAT!! so i decide to change valve covers by myself and i do the left one first, finished barely no issues.. then as I'm taking the last one of the bolts on the right side. it snaps and it's stuck inside the hole.. FML!!! now i gotta take the car to a mechanic... worst part is if i would of looked inside the spark plugs tube. i would of noticed that after i cleaned it a few months ago and changed the spark plugs. their wasn't no oil in there and i didn't need to change the valve cover..... SMFH

[@hardlymovingpro]

@@GhostOfBrickCity Live and learn .... unfortunately.

[@CarlosCastro-ix3jt]

I saw on ebay that the gasket Fel-Pro ES72481 fit for VQ35DE engine, Has anybody used those seals? please tell your experience. Thanks.

[@goodnightvids]

Will there work in the HR engine ?

[@hardlymovingpro]

Can't say.

[@hotwheelsdamian]

My HR is leaking oil into the spark plugs 😢 guess I’m going to have to buy a new valve cover

[@hardlymovingpro]

Believe newer Honda's have serviceable spark plug tube seals.

[@ryanscanlan9875]

Any difference for the HR motor?

[@hardlymovingpro]

What's a HR motor?

[@muhamadjallow3490]

@@hardlymovingpro high rev, the improved version of nissans VQ35DE engine

[@eddieflosvideos]

From this response alone I'd be hesitant to follow anything this guy suggests.

[@matiasouza]

Hello,fit on QR25DE?

[@hardlymovingpro]

Can't say with absolute certainty ... but believe it would.

[@matiasouza]

@@hardlymovingpro Thanks from Brazil.

[@eyoboyeegaming1187]

Dude this isn’t a parts counter

[@ISLANDLX]

Is the valve cover from a vq35de m45?

[@hardlymovingpro]

Roger that!

[@liblib89]

@@hardlymovingpro That would be an M35 guys... ;)

[@manuelvillar8166]

To Suzuki Swift 2013 1.4?? Thanks

[@hardlymovingpro]

Can't say.

[@manuelvillar8166]

Thanks to You...

[@SleepyRandom]

Can I do this on a 2004 Nissan Altima?

[@hardlymovingpro]

Should be able to.

[@SleepyRandom]

Hardly Moving Productions thanks I will try this do you know what tube seal should fit?

[@SleepyRandom]

Hardly Moving Productions it’s 2 that are leaking should I do them all or just the ones that are leaking?

[@sg8401]

What motor size in the civic are these for ???

[@hardlymovingpro]

I think 2.0

[@HilarioLarryCabrera]

Civic tube seaal.from.what year,-years civic?

[@hardlymovingpro]

In the video description.

[@HilarioLarryCabrera]

@@hardlymovingpro oh ok, should've read that. Thanks.

[@hardlymovingpro]

You bet!

[@IvanPerez-dv5et]

What year are the tube seals for the Civic?

[@hardlymovingpro]

2010

[@erickdizon5485]

Sir, it will work out also for nissan xtrail 2006?

[@erickdizon5485]

Are the tube seals of 2010 honda civic also fits for nissan xtrail 2006??

[@hardlymovingpro]

@@erickdizon5485 Might work.

[@erickdizon5485]

Oh so not sure for now.. i hope so bcoz i have the same problem now for my 2006 xtrail.. oil leakage goes to my sparks..

[@erickdizon5485]

If that works, u mean i replace 2 tube seals at every holes?

[@hardlymovingpro]

@@erickdizon5485 yes

[@eddieflosvideos]

I wanna know how well this held up, because it looks Jerry rigged as hell.

[@hardlymovingpro]

So far over 2 years.

[@eddieflosvideos]

@@hardlymovingpro thats honestly amazing

[@bgibbs04]

Does this work in the 09 Nissan Maxima?

[@hardlymovingpro]

Can't say but the concept is the same

[@bgibbs04]

@@hardlymovingpro thank you. We are having the hardest time trying to find the seals for the civic without having to buy a whole kit. When I call to ask about the civic seals they ask for the “ex , ls... or whatever type of Honda it is. I didn’t realize having a maxima would be this draining 🥴🥴

[@hardlymovingpro]

Suggest you go to a auto retailer who will open up gasket kits to help you find and match the seal size

[@ChrisC-fr8yu]

AWESOME!!! thank you!

[@hardlymovingpro]

You're welcome!

[@zebrarodri4197]

2010 Honda Civic but what a trim.

[@robertgibson1707]

2.0L .Im about to try it tomorrow on my FX35. Just ordered outter seals and all the Civic spark plug tube seals. They sell them in 8 packs so i got 2 packs since i will need 12. Hope it works!!!

[@TK-jj9xr]

@@robertgibson1707 is that worked? I'm planning doing it on my 350z

[@celsogarcia1882]

What year Honda civic

[@hardlymovingpro]

In the description area of this video, I stated 2010.

[@bartvermeulen6515]

Do we know the Honda partnumber?

[@hardlymovingpro]

Nope. I just went to a auto parts store and matched the seals that would fit.

[@hepzlawrence7710]

@@hardlymovingpro what are the sizes of the original seals? Im trying to find some in New Zealand but im finding it hard to find the ones you used. Maybe if i get the measurements for the originals i could find ones here that match, thanks👍🏾

[@dylanchildress8946]

Yes u can pop those spark plug seals out just like on a honda u habe to pop em out with a chisel and hammer

[@hardlymovingpro]

They are a pain!

[@JD-ic7qc]

That's awesome!!!

[@hardlymovingpro]

Thanks!

[@smsomeljbr89]

Thank you sir

[@hardlymovingpro]

Welcome

[@allenjackowiak3496]

If oil is inside the tube, it is not leaking in from that seal. Oil gets in the tube at the bottom of the tube, where it screws into the cylinder head. Oil leaks past the threads and into the tube from the bottom. The tube must come out, and then the threads are sealed, and the tube is screwed back in.

[@hardlymovingpro]

Here...watch this video to see how I fixed the tube oil leak on a Toyota: kzbin.info/www/bejne/p4TMhHZnl8iYipo

[@gallo2760]

The only problem this tubes on the g35 don't have any thread how can I remove them?

[@allenjackowiak3496]

Ummm, I'm aware of that and have resealed them in the past. That is not the style of this valve cover. If there is a seal in the cover, that is for the spark plug tube.

[@GeloNegron]

Not all cars are the same. Nissan says & we can confirm, if oils inside the spark tube its coming from up top, not beneath… unless you catastrophically blew your engine & head gasket.

[@el011000]

Terimakasih bro, mau kucoba biar ga bocor bocor mulu

[@hardlymovingpro]

Terima kasih atas kiriman Anda. Semoga beruntung dengan pekerjaan itu!

[@el011000]

Seal yang dipakai untuk satu mobil berjumlah 8pcs bro

[@hardlymovingpro]

@@el011000 Itu benar dan lebih murah daripada membeli penutup katup baru.

[@el011000]

Terimakasih akan saya coba , semoga Tuhan memberkati kamu

[@el011000]

Sejauh ini dgn double seal berapa kuat untuk pemakaian harian ,apa bisa lebih setahun

[@jaydean4765]

This is not a M45. It's an old maxima or I 30 I think. M45 is a v8!- this has 3 cylinder tubes...so is from a v6. I'm now the proud owner of a new dremmel, some cut wheels and 2 felpro seal sets I didn't need and Now have bought new valve covers for my vk45de infinity 😢

[@hardlymovingpro]

Thanks for the update but definitely remember the car as a M.

[@jaydean4765]

@@hardlymovingpro old M30 maybe...

[@adrianfigueroa8721]

So this ain't good to do on a 2006 m45 infiniti

[@mauricesimonscrubbs7425]

The problem is you can't get the top cover gasket with the seals from the auto parts store At all but you can get a gasket from Walmart the entire kit I'm serious Second you can't get the valve cover gasket kit entire assembly This nissan rogue will be fun 🤣

[@hardlymovingpro]

Thanks for sharing! A link to the Walmart kit would be nice.

[@r3dhorse]

Why not just put RTV around the old spark plug seals and call it a day.

[@hardlymovingpro]

Won't work.

[@jamessalvia4839]

Im looking at Rock Auto and want to confirm were the seals for the 2010 civic 2.0L?

[@hardlymovingpro]

Yes ... I believe so.

[@mitsuoo1012]

What does new tube seal look like?????? Duhhh

[@Sj4.4.4]

Will not fit for vq37HR

[@hardlymovingpro]

Thanks for sharing!

[@robertyanez2031]

Anyone try this on a 2018 Altima yet?

[@Jedi_Luke]

Bad designs like this is why I'll never own a Nissan. Luckily for people who get stuck with these cars, eBay now sells a set of valve covers for under $50 FYI.

[@hardlymovingpro]

I agree. Those seals should be serviceable; which motivated third party parts makers to produce cheap knock off valve covers.

[@dimassmith8367]

this is a real nissan blunder that they keep for years... and give lesson to me not to buy any nissan again. my experience is with QR25DE in T30 2005, and Ur described method its the same thing as my mechanic had done.. but the replacement seals cracked up again when i drive it on highway, i push the engine to the limit in high revvs, so after another same work had been done, ive sold the car and never buy nissan again ever

[@hardlymovingpro]

Yup ... a poor design.

[@otm777]

Ha...Take that Infinity!

[@uptownsamcv]

FUCKING AWESOME !!

[@henrynissanmimintruck]

Kinda of risky don't you say. And to much work and I see some damage when cutting. I'll just buy a new one for safety. But yea good luck.

[@hardlymovingpro]

Couple hundred bucks for a POS plastic cover vs $20 bucks for new seals. So far this repair has been holding for the customer.

[@WizzRacing]

Sounds like VW.. I need a new PCV valve.. They hand you a whole new valve cover... Have a nice day....

[@meTimetraveler]

why not just use a seal puller

[@hardlymovingpro]

Because it's designed by Nissan to be unserviceable. Can only be cut and pryed out.

[@physics2817]

Or…buy the aluminum with replaceable seals 😇

[@hardlymovingpro]

If there's a vendor that sells them and the car's a keeper.

[@Kickinvtec]

Please do not do this this I a problem waiting to happen

[@hardlymovingpro]

???

[@Sroor90010]

🤣🤣🤣🤣🤣🤣

[@wifredocancel7385]

Na,,, That is not going to work!!!

[@hardlymovingpro]

Working so far!!!!

[@wendyconstant2454]

What year of honda civic to seal i can used?

[@hardlymovingpro]

Believe it was a 2010.

[@saved74]

Will this part from Amazon fit a 2005 Altima S sedan?

[@hardlymovingpro]

Can't say.

[@saved74]

@@hardlymovingpro Once i got it apart I decided to get a new one anyway since it looked beat up. Thanks

[@adlerxiloj9005]

Will this work for a 2003 Infiniti Fx35 aswell?

[@hardlymovingpro]

Can't say.

[@Angel-eg6ij]

I have a 2006 nissan sentra ser-spec v 2.5 litter manual will this work

[@hardlymovingpro]

It might.

[@albertllaguno9941]

This seal honda civic 2010, fit to nissan armada 2007?

[@hardlymovingpro]

Wouldn't know. Maybe easier to buy a cheap replacement valve cover on Amazon or ebay

[@Raul-he2sb]

Would it work on a 2006 Nissan altima 2.5 ?

[@hardlymovingpro]

Can't say.

[@jamessalvia4839]

were the seals for the 2010 civic 2.0L?

[@hardlymovingpro]

From my recollection ... yes.

[@therealblakekirkham5701]

Are the 04/12 titans the same size?

[@hardlymovingpro]

Can't say ... sorry.

[@jdc72cutty]

This is exactly what I'm trying to find out. What size seal works for an 05 titan