How to Replace Office Chair Casters - Full Install Video

[@CasterHQ]

UPDATED CHAIR CASTER REMOVAL & INSTALLATION VIDEO + INTRODUCING NEW SELF BRAKING CHAIR CASTERS: kzbin.info/www/bejne/pZK6nKtogryeg7M

[@SpaceMel00]

Dude, I am a saleslady who has no handymam abilities. I just hired someone to put in a new gas cylinder in my office chair. He did that and left. My chair was wobbly but I just sat on it...then I noticed Handyman forgot to put back in one of my casters! So I searched on youtube, found your video. I thought no way I will be able to do this. But with a small hammer I had on hand, I got the caster to pop back in! I was nervous like it would break but it went right in. I am so relieved. thanks so much!

[@CasterHQ]

I am so glad that this video has helped you. Thank you so much for watching.

[@PracticallyCreative]

I have arthritis in my hands and had been trying to put casters on my new office chair for a good while when I found your video. I don't have any WD-40, but I used a tiny spray of cooking oil and my casters snapped in like magic! Thank you for a workable solution! :)

[@nihonbunka]

Thanks very much. I would not have known that one can just pull them out. And the broken chair that I took from the dump at work has the same diameter and height of wheels so I replaced my home computer's chair wheel presto, and saved on the price of a new chair. Even second hand they are about 30 USD. Writing this comment took longer than the replacement. Thanks again.

[@CasterHQ]

Glad I could help

[@kentrelc1]

Same ! I just ordered a set to replace my chair wheels

[@Lipstick_and_Caffeine]

God bless you! I was about to cry bc I couldn’t get the castors in my chair for WFH & my body can’t take another day in my crappy fold out chair 😂 ugh thank you!!! ❤️

[@CasterHQ]

Glad I could help! Please don’t cry, haha.

[@happydee9362]

Me in the same situation. I could not figure it out how to put those wheels in. Thanks so much

[@jjlynn6161]

Thank you Jordan for sharing this video. Replacing 17+ year old caster wheels with new roller blade style wheels. Your screw driver tip worked wonderfully!

[@noonasreact4275]

DUDE YOU ARE MY HERO. I thought my arm was going to fall off trying to do this.

[@CasterHQ]

Hahaha! Glad I could help. Thanks.

[@kimberlywalker280]

Fantastic video...and, very well done!😃 A few weeks ago, my daughter informed me that the wheels COULD be changed..... Transpire to this evening ...I found your video...and REALIZED, I could try to pull off the wheels off the now "throw away" office chair ( wheels are in MUCH better shape) and put these on the favorite office chair with so much comfort... you can actually sleep in this chair. WALA!...IT WORKED!!!😃😃😃 Now, once these wear out...my plan is to order some from your company. Thank you.. thank you...thank you...my office chair has been REVIVED!!!!😃😃😃😃

[@messerschmitt3725]

Dude, I was getting crazy, I get this expensive casters, and I was like Jesus!... they just don't fit at all! now thanks to your video I put them all in, THANK YOU from Germany Brother!!!

[@CasterHQ]

Glad I could be of help! Thanks for the comment. :)

[@salilpradhan5080]

The installation of the Casters was super useful. WD-40 is from heaven. Your suggestion of hammering worked well. Thank you.

[@catrenia72]

Thank you. I bought replacement castors for my office chair that I was about to toss because of a broken wheel. However, I could not get the new ones on and was about to toss the chair again. This video saved me from tossing the chair.

[@CasterHQ]

I am so glad we could help!! Thanks for the comment and I’m happy you didn’t have to throw away the chair. :)

[@ElaineGuevara]

One minute in and already got the solution for my problem. Thank you!

[@KarinPrzybilski]

Thanks so much for showing us how to put the castor wheels on the office chair! I couldn't get the castors to go into their slots no matter how I twisted, turned and wiggled them! When I used a hammer they went in and I was able to assemble the rest of my office chair successfuly! Wishing you a great day! :)

[@ZuriJourneys]

Easier to get the old casters out after watching the video, Thanks!

[@BennyKleykens]

So easy! Replaced the wheels on my Office chair in 2 minutes and got the replacement wheels from an Office Chair I was going to throw away. Thanks!

[@leab100]

Jojinnkjjkjjijjjkokk Ono

[@leab100]

K ok joke ok Kokomo ok hi kiii II

[@elainelily9910]

I have 3 office chairs. Their spew dust and ruin my fake wood laminate floor. So a few months ago I got 5 Chrome Lux 3” wheels and my handyman installed them for me using a pry bar. I love these new wheels so much that I ordered 10 more and bought a pry bar at Harbor Freight so I could do it myself. I am an old lady but I am studying this video and will try to do one chair tomorrow. The handyman made it look so easy and quick. Wish I had paid better attention. But these wheels are great!

[@MindelM]

Thank you . I used your instructions to remove the casters . Fortunately my new ones went in easily

[@donnaleefields]

Thank you so much. You helped me with something that looks so easy and just isn't. Thank you for you calm, straightforward and compassionate (!) explanation.

[@sulinder2001]

Please accept my heartiest thanks for posting such an informative video.

[@CasterHQ]

It's my pleasure

[@NovaRanger007]

Thanks, this provided solution to my problem.

[@jeremyfry2063]

Thanks bro, i got the answer i needed quickly without having to listen to a bunch of repetitive rambling like a lot of help video's do to make the video longer lol, thank you tho

[@CasterHQ]

No problem 👍

[@jamesanthony5874]

Thank you for this video. I was having trouble getting my casters off, but it looks like with most of them I was just pulling from the wrong angle. Setting the chair on the ground like you show got me to the right angle and they popped right out. Only had to use the screwdriver on 2 of them to get them started, then was able to pull them by hand.

[@CasterHQ]

Glad I could help

[@HarroopLife]

Yeah, Thanks. I have fixed my own computer chair in Corona lockdown with your help. Thanks. Love from India.

[@CasterHQ]

You're welcome!

[@awgmax]

the screwdriver prying trick saved me thanks.

[@DemShotta]

Struggled for 2 hours, watched your video, finished all 5 wheels in less than 5 mintues!!!!!!!

[@CasterHQ]

Glad this video was able to help!!

[@aroshadilshan2344]

I could not do this job. But after watching this video I did exactly that. Thank you very much🤗

[@rosavelazquez4801]

LOL I was having a real hard time putting in the wheels of my office chair. It slipped my mind to use a hammer! thank you!

[@CasterHQ]

You’re welcome! Glad this video could help you.

[@Wichitan]

I recently had to non-destructively remove some oversized casters from my office chair due to a broken base. Since I was going to reuse the casters and they were injection-molded plastic, I didn't want to damage them, so the screwdriver approach was out. What I wound up using was a large-ish pair of diagonal cutters. I simply opened them as wide as they'd go, then placed the cutter jaws over the stem behind the extruded metal ring. Also, diagonal cutters have a 'flat' face; and that face was toward the top of the stem on the caster to create a tappable surface. I'd rock them a couple of times to get the casters started, then used a hammer to tap them out. This is a bit more secure method than using a screwdriver.

[@BeeWhistler]

Yeah, I noticed my chair is starting to scratch my hardwood floor in my new house and wanted to make sure I can replace them before ordering more. Thanks for the video!

[@lisalewis4999]

Thank you for the tip; hammer/flat head screw driver. Worked beautifully!

[@dabi_]

for whomever it may concern, if the removal is hard for a caster wheel, try using the head of a hammer for leverage to pull it out and loosen it

[@BNAGurl59]

Having to change wheels because of hair and dust. Your video was helpful

[@GTWorldca]

Saved me from tossing out a perfectly good chair. Thanks!

[@CasterHQ]

Glad it helped!

[@sathyantinku9177]

Thanks for the video. I literally kept pasting breaking wheels together with glue.

[@CasterHQ]

Glad it helped!

[@stygiann]

Thanks for the screwdriver tip. That was very helpful!

[@ZezaFarooq]

Thankyou i fixed my broken chair because of you 😍

[@CasterHQ]

Glad I could help!

[@terried4648]

Thank you for video I have been throwing office chairs away that look beautiful but wheels came off always 1-2

[@fwildflower1963]

Thank you. So easy to understand. Got it done in less than 5 minutes !

[@CasterHQ]

Glad it helped!

[@kushpaladin]

thanks, i had no idea they were so easily removable. i had wheels break on my chair and the stem started digging into my floor. had i known they were so easily removable i would have removed the whole thing to protect the floors. :/

[@CasterHQ]

Glad I could help!

[@surajnarayan3782]

Thanks a lot man... Just repaired wheels of my chair.. 🔥🔥🔥

[@MROCD]

Perfect 👌 I thought no way are they coming off and a bit of a wiggle and a flat head screw driver and all changed thanks

[@Chaitusworld]

I am from india and your video really helped me alot thanks for sharing

[@CasterHQ]

Most welcome!

[@swatchproductions2659]

The WD tip to push in wheels really helped me👍🏽

[@theresaday9194]

Thank- you so much! You made it seem possible for anyone and explained it very clearly- well done!

[@chiragdeshmukh325]

The hammer trick worked, thanks!!

[@BidoTech]

Excelente video, I replaced mine before to watch it.

[@boundariessetinstone5893]

It will not come off wish they came off easy like this. Edit: All I did was spray some cooking spray in the crevice, spun each one around a few times to make sure the oil is in there good. It took a hard pull and for me to push the chair on a wall while laying on its side but job done thanks. I have a severe hip and groin condition that may it harder so someone healthy should be able to find just use risistance.

[@migueldeportugal8420]

I thought I had to summon the lord of darkness to pull them out. Thank you so much for showing how easy it is.

[@patilsonal47]

Thank u solved my chair problem

[@CasterHQ]

We have a caster that will work that we sell in singles but you can change the quantity to 6 pieces at the product page here. www.casterhq.com/4-Inch-112-Expanding-Stem-p/hdldtpr414-112.htm

[@nujdefante2667]

Simple and straightforward. Thank you so much!

[@CasterHQ]

0:14 - *_Office Chair Caster Removal_* 1:38 - *_Discussing Premium Office Chair Caster Features & Benefits_* 2:41 - *_Installation of the new upgraded Chair Casters_*

[@Liusila]

I had to hammer in my screwdriver into the gap but they finally came off. Was about to chuck away the whole chair!

[@CasterHQ]

Yeah sometimes it can be a pain to remove and install new ones. Glad you didn’t toss the chair. Thanks for the reply.

[@sureshmanjarekar8650]

Thanks brother. I did it with the help of your helpful video. God bless you

[@CasterHQ]

I am glad this helped! Thanks for watching! :)

[@simranjitbharta9311]

Thanks a lot .it help me a lot .i was looking Machanic to fixed chair.but when I was video .i fixed my self.thanks mate

[@CasterHQ]

Glad it helped

[@paulbode2154]

Thanks. I had bought 2 office chairs. On assembling the first they did not click in, I tried with a hammer the way you showed but did not work. Finally I put them with the wheel down, put a piece of wood on top of the leg and than with a hammer from the top. That worked. I thought I would have to do the same with the second chair (same brand and style) but those clicked in just fine without problem...

[@CasterHQ]

I am glad this helped! Thanks for watching! :)

[@jilliansala139]

A Must Have!

[@chocgurt]

Top search result. awesome video and tips!

[@CasterHQ]

Thanks Martin!! I appreciate the compliments!

[@samiullahvohra4238]

Thanks bro , I use sizer as i dont have other tool but your trick works charm

[@CasterHQ]

Glad I could help!! Thanks for the feedback!!

[@user-bx7ri1ei8w]

Thank you! That was easy!

[@CasterHQ]

Glad it helped!

[@freakyfornash]

This video of yours just literally helped me replace a wheel on my chair now! Thanks so much, and as Homer Simpsons would say (obviously when something good happens) "WOO HOO!!!" 😃

[@maestrovic42]

got mad and threw my chair through the room and broke off one of the casters. now i gotta do this

[@DEATHFIFR190]

I do have to buy new Wheels because turns out the ones I bought are too small but with that being said thank you for making this video I thought I was just going to have to deal with two out of five of the wheels on my chair just being broken forever

[@HoursaDay]

Thank you SO much! I was about to pull my hair out installing new casters!

[@CasterHQ]

Glad I could help!

[@josym1958]

Thank you for the tip. Being I didn't have any WD-40 spray, I poured some olive oil in a bathroom dixie cup and dipped the caster stem into the oil, then hammered on the flat part of the castor and went right in the hole. Then I turned whole star stand sideways to wipe off the drippies. I don't know what to call that part where all the castors go in lol. Thanks again for your idea giving my idea for me.

[@CasterHQ]

Glad it helped!

[@InGodWeTru2t]

Thanks brother! HAD to like and leave a comment after. Much respect 👊🏿

[@CasterHQ]

Not a problem! Thanks for the support!

[@billmilosz]

Pretty easy. Thanks.

[@sjcastillo87]

WD40 did the trick! Your video was so helpful, thank you so much!

[@CasterHQ]

Glad it helped!

[@boundariessetinstone5893]

Thanks for your tip and help

[@deborahgage7130]

Thanks! Worked like a charm.

[@Dane3412]

ALL chairs from all makers should come with TPU fitted wheels in this very design (rollerblades-like).

[@thesuperstomper4776]

Thanks! The first 40 seconds was all I needed!

[@oscarmilla1048]

very helpful thank you !!!!

[@patcastro3803]

Thank you for this awesome KZbin content! It solved my problem. 💖

[@CasterHQ]

Glad it helped!

[@faith6834]

Your video helped me. Thank you!

[@CasterHQ]

*UPGRADE YOUR CHAIR CASTERS TODAY - SET OF 5 ROLLERBLADE STYLE CHAIR CASTERS: **amzn.to/37878Xj*

[@OfficialWimpydoll]

Very helpful thank you

[@lokeshraghavendra1159]

DUDE THANK YOU SO MUCH! You made me repurpose 2 really great chairs that i was about to throw away. Saved me a good 70$ for the chair i was eyeing. Massive Help :)

[@CasterHQ]

Glad I could help!

[@ggsmkularathna]

Really helpful video

[@chiplitch]

Thanks dude!

[@VictorAdad]

great video guys

[@djjoeykmusic]

Great video Awesome job Thank you

[@JayOrlando32828]

Thanks I thought it was a little more difficult 😅

[@FirestormX9]

Thank you so much for this tutorial! Helped a lot

[@CasterHQ]

Glad it helped!

[@dharamjeetsinghrayat7962]

Thank you this helped

[@CasterHQ]

Thanks Dharamjeet!! Appreciate the compliment.

[@cyko5950]

this was 400 x easier than I expected

[@abdulhaleemnasirmakhdoom7836]

Thanks so much for sharing this video

[@Jay60525]

Saved my day. Thanks

[@CasterHQ]

Glad it helped!

[@PurpleIphone7]

Thank You because I couldn’t figure out how to put the casters on a new desk for my printer. No instructions were included - only a diagram.

[@CasterHQ]

I am glad this helped! Thanks for watching! :)

[@nuhafatimah4303]

Thanks !! It was super useful!!!👍👍👍👍

[@happydee9362]

Thanks so much.

[@Subhadhra108]

You make it look so easy. But, I will try your WD40 and hammer trick. This senior woman says Thank you.

[@CasterHQ]

You can do it!

[@Flacko-300]

This helped the news with lizzo

[@CasterHQ]

I am glad this helped! Thanks for watching! :)

[@AVTorres]

"NON MARKING"... SOOOOOLD!! Thank you..

[@CasterHQ]

You bet!

[@divyaanantsri9817]

Life saver!! Thank you!!

[@dishxpert]

Thanks for the help

[@CasterHQ]

Not a problem! Thanks for watching.

[@aymanhijjawi9869]

thanks alot , worked v well

[@CasterHQ]

Glad it helped

[@arsi.k2215]

thank for the help

[@AestheticArcade]

Thanks for the video and its helpful.

[@CasterHQ]

Glad it was helpful!

[@Keshii_ii]

This helped me a lot. Thanks!

[@CasterHQ]

*I am so glad it helped. Thanks for watching! :)*

[@andisiwegwele1989]

Thank you so much the video helped me