How to Replace Pulley 02-09 Ford Explorer

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@ThomasMichaud]

This video was a lifesaver!

[@JaradNobles]

Thanks for this video. I lost my idler pulley earlier this week and had to replace it. This video helped me confirm my suspicions and quickly repair my vehicle. DIY definitely beats taking it to a shop when it's something simple like this. Thanks again guys!

[@ksuba65]

I was struggling with replacing the drive belt for my 96 explorer and found your instruction video, as soon as I finished the video it only took me 5minutes! Started my engine and the Idler sheared off. I guess I should have checked my pulleys hahaha. Watching your video on replacing Idler. Got to get the old bolt out first. I will always check with your site before starting my next project! Thanks

[@StevenOak]

Thank you for a great video showing exactly what needs to be done to replace the idler pulley

[@1AAuto]

@xx0rz Hey thanks for checking us out. Glad we could help you out. Have a great day!

[@1AAuto]

@567dirt8910 If the belt squeals when you start the truck up, it should either be a bad belt on your Ford Explorer or a worn serpentine belt tensioner. I would inspect the ribbed side of the belt first for cracks. If it has a bunch of small cracks throughout the belt you should change it. If it's not cracked, more than likely the belt tensioner needs to be replaced. Hope this helps you out.

[@1AAuto]

You may want to check the belt to see if it's worn or cracked. You may also want to check the belt tensioner to see if there's enough tension on the belt.

[@paulopereira3150]

Very good video, congratulations and thanks for the class, we wish you success!

[@1AAuto]

+PAULO PEREIRA Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@567dirt8910]

I think this will be my next move on my 03 sport trac. The "belt" or one of the pullys squeals bad in wet weather, Is this a sign of something particular??? I guess I'll just remove the belt and test the idler pully out and see what needs to be done. I'm sure I'm due for a new belt also. As always thanks for the videos - I love 'em.

[@planb2222]

Thanks for this super helpful video. May God bless you and keep you safe.

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@99f234]

thanks, this video helped remind me how to install the idler pulley on my 2002 ford ranger today. thumbs up.

[@ogbobbye]

Love your videos every time I need to do anything on my car I check your videos first. the idler pully look easy to do but I still watch this first and glad I did cause I didnt know about that lock washer on the back side. BTW I had to change a bad oil pressure sensor switch and I was surprised you didnt have a video on that because its a pretty common problem on Fords it was easy to do but very hard to figure out how to get at it. I know you would have had a trick or 2 to get it. thanks

[@1AAuto]

You may be referring to the AC compressor pulley.

[@1AAuto]

@journalwriter It sounds like you have v belts on your '94. Obviously you want to make sure you get the correct replacement and removing the belt probably involves loosening a pulley or component.

[@1AAuto]

usually if a tensioner or idler pulley fails they'll wobble all over the place.

[@1AAuto]

@surfndude44 There's not really any trick other than trying to narrow down what section of the motor the noise if coming from while it's running.

[@1AAuto]

You may want to inspect the other pulleys to see if they're working correctly.

[@jstorm001]

When i changed my Idler pulley & tensioner pulley on my 2002 explorer i didn't disconnect my battery .i never do unless i have to last time i did it messed up my engine idle made me go nuts didn't know what was wrong with my explorer it always wanted to almost stall at a stop but reading info online i disconnected the battery again for 15 to 20 minutes fixed it

[@evilgrows]

No reason to disconnect battery when doing this replacement...

[@1AAuto]

The procedure should be pretty much the same.

[@1AAuto]

@tiara313 They're pretty easy to fix. We sell the pulley on our website 1aauto.com If you have basic hand tools it's not to bad to fix yourself. Hope this helps you out.

[@TrueBoricua]

my bolt broke off my 1999 ford explorer xls 4.0. any idea what size it is and where to find buy it? please message me ASAP if possible thank you

[@1headone]

Very helpful thanks Guys!

[@1AAuto]

+Al, Orange Park, FL Thanks for watching. If any of our viewers need to replace their idler pulley we carry them for many different year, make and model vehicles on our website. We also offer free shipping on all orders in the US. Here's a link to them www.1aauto.com/drive-belt-pulleys/c/178?KZbin&CTA%20Comment&ATony

[@brandonwebb1819]

I was told when getting a new idler pully not to use the back washer on it is that true for my ford ranger 99

[@1AAuto]

+brandon webb The back washer holds the bolt in place while it's installed at the factory. It may not be needed.

[@oscarmoyano2724]

Gracias por el vídeo maestro!!!!!

[@1AAuto]

Thanks for checking us out. 1aauto.com +Óscar Moyano

[@1AAuto]

@surfndude44 It wouldn't be a bad idea if it's the original one. If your truck also has the original water pump, you may want to replace that too while you're in there, and already have it off. Here's a link to our timing chain sets on the website if you would like to check them out. 1aauto.com/1A/TimingBelts/Ford/Explorer/-/-/2002?ATony

[@1AAuto]

It may be the belt tensioner that's loosing some of it's tension. When you did the pump you had to lift up on the tensioner to release the tension on the belt. This may be what's causing the noise. I had this happen on a 92 Mustang when changing an alternator, If it is, we sell new serpentine belt tensioners with free shipping on our website 1aauto.com 888-844-3393

[@vini914]

Great video, that was exactaly what I was looking for! I need to replace the same pulley for my explorer but I couldn't find it in your website for the 94 model, can you please help me? And I live in Brazil, do you take international orders? Many thanks!

[@powers0099]

I have a 2005 ford taurus. It is making a whirring noise coming from the pulleys. I have replaced the tensioner pulley and it is still making the noise. What else could it be. It is a 6 cyl. Thanks for any help.

[@robertoteles2289]

What is the part number I need to change this part and I do not know the exact part number I will appreciate your help

[@jpedroza602]

I got a 5.0 started squeeking aftervchanhing water pump i changed belt and pullis and still aqueeks i wonder if my new water pump can be squeeking....

[@TheJeepWheeler]

Is the tension pulley in the same spot on the 5.0's?

[@1AAuto]

We carry them for both the 4.0 and 5.0 motor. If you call we can take your info over the phone and match you up with the correct serpentine belt for your Ford Explorer. 1aauto.com 888-844-3393

[@kingsmanname]

Is this the same for a 05 Ranger with the 4.0l?

[@1AAuto]

+Tim Gray It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com

[@ez123abcz]

Where can i find the bolt for sale

[@1AAuto]

+Yump Try searching on eBay motors. Thanks for checking us out!

[@1AAuto]

It could be the fan making noise, you may want to look at it. Hope this helps you out. Have a great day! 1aauto.com 888-844-3393

[@Don-md4df]

I have a 1997 Subaru outback legacy I recently noticed that the engine gets real loud when in isle than calms down for two minutes the gets loud again what does this mean?

[@1AAuto]

You may want to see if you can pinpoint the source of the noise. Depending on the noise it could be anything from a bad pulley to an exhaust leak. Hope this helps you out. 1aauto.com 888-844-3393

[@Don-md4df]

Thanks

[@jasonjoncas5998]

That puppy needs a new belt.

[@1AAuto]

+Jason joncas Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@quanitiaredmond4769]

I have a Ford Explore 06 & the belt & pulley need 2 be replaced & the mechanic is talking $416 is that 2 much? or not?

[@1AAuto]

+Quanitia Redmond Thank you for checking us out. If you are able to perform this replacement yourself, it will save you a ton of money compared to the quote. The reason for the high price is upcharge in parts and on average 80 - 90 dollars an hour in labor. 1aauto.com

[@evilgrows]

@@1AAuto Make that NOW (2023) about $125.-$135 or more an Hour! Ouch! 🤥

[@1AAuto]

Thanks for watching. 1aauto.com 888-844-3393 FREE SHIPPING on all auto parts in the lower 48 states!!!