Not many people know the secret of this tool!!

It turns out that this tool has hidden secret features, try to watch the video until it's finished for clearer details.

[@CptCoitus]

Finally!! An easy solution to a problem nobody has!

[@robertduran178]

Instead of destroying the handle on an adjustable wrench, here in America, we just go to "Home Depot" and purchase the proper tool for the job.

[@williamwheeler8900]

some of these hacks 😂 destroy one tool to not have to buy the correct tool is idiotic

[@itowmyhome797]

If Trump gets voted back in the office, you’re gonna need these third world skills, oh that’s right the cultist squad won’t everyone else well

[@andrehoussney5703]

Wait till your supply chain fails you and you’ll be trying to remember these hacks you saw back when the internet was working. 😂

[@sammiches6859]

​@@andrehoussney5703Or I could spend seconds using a Knipex Cobra that I already use for fasteners and pipes like this.

[@riddickyulasentertainment1925]

I think in that situation, the last thing you're gonna be worried about is making a special wrench for that ONE thing, pretty sure its be easier to just make or find another one. 😂​@andrehoussney5703

[@carlosherrera0001]

Another secret is that you could grind the whole thing down and make a cool toothpick out of it.

[@paulmazerolle1735]

😆

[@tbird430]

😆👍🤣

[@tylersmith3398]

-Once I reached the halfway mark, I was convinced he might do just that.

[@malbancroft1932]

Or a tool for picking your nose for those awkward to reach places

[@ler1950dec]

ha, ha, all that work to tear up a perfectly good tool !!

[@dustin2250]

Next, I regained consciousness. Then, my dad said, "If you ever touch my tools again you won't wake up."

[@tbird430]

🎯

[@PaladinsLight]

lol😆😅🤣😂

[@vicferrari9380]

As a kid I broke my dad's favorite hammer trying to pull a screw😢 never did that again😊

[@mikedropper]

As a tradesman and a father, I can confirm this to be the funniest comment on KZbin.

[@executivelifehacks6747]

Indeed, GOATed commeny 😂​@@mikedropper

[@Bream243]

If anyone thinks I am going to do that to my Craftsman 8" 12", or 16 " adjustable wrenches that I have had more than 40 years, you are mistaken. As stated below, there are plenty of other tools that can do this.

[@williamcampbell5526]

You are so right a small pipe wrench or locking pliers.

[@rolandmartillano5834]

Waste of time😊

[@skiploader85]

This video is a third world solution....

[@zh9119]

This video is not for an American point of view. In America you can find millions of tools for a decent price, in Third World countries, even sometimes having the money, you won't find the right tool. Please don't break your Craftsman!

[@louiscolborn6715]

You see the pigment of the hands? I rest my case.

[@timberwolfdtproductions3890]

That makes so much more sense than reaching into my toolbox for my Channelocks, the correct tool for the job.

[@davidsturtz1731]

or a small pipe wrench

[@WilReid]

or a factory made chain clamp

[@grimaldusgonzalez6122]

Why buy a Channelock plier when you can buy an affordable set(multiple tools)of tounge and grove pliers

[@MichaelLopez-ee9hb]

And this is just so efficient. Makes me just want to spend about thirty minutes, at least making this tool, instead spending ten seconds to do this job, with channel-locks.

[@goodllookin1722]

Stupid

[@agnostic47]

I've always been a believer in having the right tool for the job. That doesn't mean destroying a perfectly good tool to do the job of another.

[@tommurphy4307]

me, too- see my comment above

[@flyingsodwai1382]

Destroyed? Get a dictionary.

[@edmills12]

I would of just gotten out my monkey wrench

[@raulgarduno301]

..or why not use a vise grip...you just destroy a tool..irreversable damage👎👎👎👎

[@macforme]

@@raulgarduno301 No it is not destroyed... it is now a multi-function tool.

[@HacksawTim]

30 seconds in, and I'm thinking, "I'm gonna regret this." I wasn't wrong. It wasn't a total waste of time, though, since even a bad example serves a purpose.

[@mikesaccoia5748]

Stay tuned for the next video. The little known secret of turning a claw hammer into a screwdriver in 30 easy steps.

[@gazratjackson]

I turned 2 of my fingers into red stuff on my metal lathe in only 1 step 😊

[@RLS1010w-wh]

​@@mikesaccoia5748😂😂🥂👍👍

[@STV-H4H]

I immediately went to the comments to see if anyone else was thinking ‘destroy a perfectly good cresent wrench?’ Perhaps this is an ok idea. But finding a bike chain is more effort than going to HD to but the right tool. Buying a bike chain, negates having to look for one, but probably costs around the same as buying the actual tool. Ruining one of the last remaining USA made C wrenches is a terrible idea. Even F’ing up a crappy Chinese one is still more work than it’s worth. But if you have a broken bike and the chain is already trashed, your wrenches are junky HF stuff and you’re needing to get this exact same thing accomplished, this might just be the best plan ever.

[@ray11140]

My thoughts exactly. Strange, I always used the ring to hang the tool up.

[@pierreracicot1405]

You know , you still have to have a used chain. I totally agree with the comments about destroying the crescent wrench. Use pliers, channel locks, small pipe wrench , even rope wrapped around it and a small wooden stick.

[@tommissouri4871]

You steal that off someone's bicycle. From the condition of the wrench, it was probably stolen, too.

[@tommurphy4307]

if its a real crescent brand- its practically good as gold just the way it is.

[@nickconnor8667]

Destroyed a beautiful crescent rench

[@mariocestra1156]

He sure did. He could have used a pair of pliers. He could have also used a flat piece of metal to make it instead of destroying the wrench. To each their own, I guess.

[@gertjooste9558]

Really

[@blauer2551]

Most of these videos have easier solutions

[@anicetogalorio3217]

That's an adjustable wrench man, crescent is a brand name. It's WRENCH, not RENCH

[@blauer2551]

@@anicetogalorio3217 Let’s be honest, if someone asks for a Crescent Wrench that’s what they will be handed regardless of the brand.

[@patrickmckeegan5345]

Or you could get a channel lock or vice grip plier. Or a vice grip with the plumbers chain setup. I got on at a yard sale for $5 and all my adjustable wrenchs are intact.

[@АлександрАбросимов-о1ф]

Дурдом

[@gregtaylor6146]

...... and you can still hang your wrench up on it's hook, as originally intended.

[@DrMontague]

what a waste of time ,my granny got a jar opener from pound land

[@Terry-v9e]

😂😂😂 Exactly 😅

[@username8171]

Ya this was silly.

[@JamesGregory-o4q]

A pair of pliers would work better. Duh.

[@JeffBurmester]

I love how he says "try to watch the video until it's finished..." I couldn't.

[@KillerBill1953]

Considering the workshops I've worked in, and those I've visited, I always thought it a good idea to have the hole to hang the tool on a rack. There a plenty of tools out there for this type of job without destroying ones you already paid for. I'm surprised it doesn't now pick up thousands of encrypted television channels for free...

[@androiduser4162]

you know it

[@wadebarber6493]

You are right.

[@lesjones471]

I agree with you,I'm a fully qualified mechanic and would never do that to a good tool.Use adjustable jaw grips I say which would come in handy for other jobs too.

[@JnitraM078]

You can buy one of those for about the same price as a 10" crescent wrench. No need to destroy your own. Hey, how about a pair of channel locks? any other adjustable groove jawed wrench?

[@randybird9979]

I just use a pipe wrench or a good set of pliers and not mess up my adjustable wrench

[@neiljamison6415]

I had that exact situation a couple of weeks ago, had I known this I could have spent half an hour wreaking an adjustable wrench, but silly me I spent half a minute to get out my multi groove plier and unscrew the pipe. Also if you have to make drastic alterations to the tool to have it do something it's not designed to do is hardly a hidden secret feature.

[@terencelavigne9626]

No no it is a secret function. Also a handy secret function is to take a normal wood handled mallet and remove the head, whittle the remaining handle for about an hour, and boom secret hidden toothpick. Don't know why more people don't understand multi-functionality.

[@surfernorm6360]

I thought it was too much trouble too besides channel locks a pipewrench will turn round or damaged nuts or bolts. There is one thing big chain wrenches are usefull for though. Thats stopping crank ballancers or other big round objects like bigger than 6 inch round objects that are very tight but them 19" channel locks are mighty handy for lots of things

[@robynchesser9643]

facts facts facts!!!

[@crabtrap]

The ONLY reason this could be useful, is a chainwhip in your bike tools. That chain would slip on anything else. Why strapwrenches are rubber

[@surfernorm6360]

@@crabtrap Your Mistaken I'm retired but I bought a chain wrench off of a tool truck in thousand oaks, ca in '98. I don't know what bike tools are you talking about you must have brain damage so I will just ignore you for being to young to know when to shutup. I think this wrench was for twisting pipes up to 10". Around our shop we used tools like this to turn motors over or to lock them when tightening crank nuts or VW gland nuts to 400lbs. As an there were special factory tools that could do the same job but they cost even more and only worked for one application. If you want to really learn about tools instead of just shooting your mouth off get a job at a heavy equipment shop and see what tools the men have. However I would never have messed up that adjustable wrench the was Indian guy did but those guys are different they use cutting torches and arc weld with thongs on.

[@dirtycurty1202]

I hate when people call it a function of the tool when it's NOT A FUNTION OF THE TOOL but rather a modification of the tool to perform a different task. It's NOT A HIDEN SECRET FEATURE!!!!!!! It's a modification.

[@Tim.Gregory]

I agree just a modifaction. He could have just used a pipe water pump plier

[@kenhill9176]

A

[@macdaddy52]

Total ignorance

[@vicferrari9380]

But look at all the comments he got.

[@nickzalucha218]

Yeh or "Old masters wont show you this secret"

[@wood2259]

That was 3 minutes of my life I'll never get back

[@marcio3719]

It ruined a tool to do what others do much better. Bad idea.

[@wallpurgesnight8209]

Well if in a pinch & no access to said tools (or$) w/parts laying around... The video did show WAY to much grinding (one pass for each grind would suffice, rather than more than a minute, the majority of the video as far as steps, with the least technical area). Otherwise nicely done X) Title is misleading too... (Fool me once)

[@easygoing2479]

I did the same thing with an old Crescent wrench years ago. Worked great. Later I went to the store, bought a chain wrench, and turned it into an adjustable Crescent wrench.

[@cheeseheadfiddle]

Dude, you need your own tool hack KZbin channel.

[@donaldpennington1990]

😆

[@WompRat94]

That was perfection in the world of sarcasm and wit

[@mikedavis1069]

That was funny...

[@graemed3012]

Now THAT would be clever!

[@dwagneriowa]

Can’t believe that until this hack came along, I’ve wasted my whole life using the right tools.

[@justme.9711]

Never lend this guy your tools.

[@gregbusick8833]

The hole is for clipping the wrench to a carabiner by skyscraper and bridge builders. It would retain the wrench to the builder's tool belt and prevent a slip, dropping it on someone below. Kinda put a halt on the work too if you dropped one not secured.

[@dntlss]

Really? i always thought it was there to hang it in your garage,guess it could also be put on a carabiner.

[@energyfitness5116]

Long walk down to go get it.

[@flyingsodwai1382]

That makes sense, I always thought the hole was to big to be just for hanging on a a peg board.

[@johnr990]

Aerial Riggers too! Climbing without carabiner and lanyards on tools and gear is a big no no. Dropping anything is not an option.

[@eddie054]

Whoops! There goes that car's windshield!

[@twofingers2233]

It’s okay. This was a metric Crescent wrench.

[@UpnorthHere]

But it was also the old, defective, left-handed style...

[@Procrastinator1948]

If only there was some magical invention that would accomplish the same thing. Could maybe call it a strap wrench.

[@rswow]

Yes. Or a chain wrench.

[@noblsht]

The dollar tree might sell one for a dollar if they don't have it harbor freight might have it for two dollars

[@tommurphy4307]

for when some idiot cranks the oil filter on like he's godzilla?

[@peterbaruxis2511]

Praytell, who was that? The mchanic u da future!

[@macforme]

I think we are all missing the point here. If he didn't take up minutes of out lives creating useless content... he wouldn't make any money.

[@ricknone4686]

Nice, destroy a perfect Crescent wrench 🔧, when you could have used lock jointed pliers or a small pipe wrench and also make a rubber belt wrench similar to a chain wrench but belt won't damage plastic (pvc)!

[@jimzimmerman5288]

Called an adjustable wrench. Crescent wrench is a brand.

[@georgefarmstead9979]

Why!!!!! Why!!!😂😂😂😂

[@Royale_with_Cheeze]

@@jimzimmerman5288 Adjustable wrench, or spanner in British, is just that. A crescent wrench is named for its shape and comes in different sizes. I never heard of it as a brand name.

[@truthmatters8241]

@@Royale_with_Cheeze I never heard of a crescent brand either. I've known it by that name for it's shape.

[@dyer2cycle]

Well, true...but perhaps someone didn't have access to or money to buy a pipe wrench or adjustable pliers...but then again, if one couldn't get, or couldn't afford those tools, what are the odds they would have an angle grinder to grind on this adjustable wrench with?...

[@ghostboatsofsouthernmichig3773]

Personally I believe a crescent wrench is the worst tool ever designed I would never do this. Get the right tool for the job.

[@ulrikof.2486]

This is like "do ya know the secret of this large barn door? If you nail it to a rocket, it can even fly!"

[@Dogsnark]

No wonder few people know about this tool!

[@joemendiola7345]

They do but too much waste of time.

[@RLS1010w-wh]

In Wien sagt man so arbeiten die Russen in Sibirien 🙉👳‍♂️

[@TheVicar]

Its so very sneaky of the manufacturers to hide this secret by not doing it in the first place They must think we're stupid

[@phildavenport4150]

Yes! Don't just reach for a pipe wrench, destroy a valuable tool so that you can do that job for probably the only time ever. And take most of the day doing it.

[@tommurphy4307]

wa-wa-waaaaaaaa!

[@wilsonrajagukguk1]

For open a cheap pipe, you destroy a more valuable key.😂

[@michaellissow543]

OH, so that's why the adjustable wrench companies designed that hole. All this time I thought it was for hanging it in a convenient place. Right.

[@TheVicar]

or to put a rod through to create more leverage

[@Spruce_Bingsteen]

LOL! Too funny Michael. 😁😁

[@HumanzeeTamer]

That pretty cool, I visualize someone in a remote place that's in a bind then comes up with this idea to salve his problem, I like it. thank god for the hidden tool.

[@markyoung4940]

Something a pipe wrench or channel locks could have easily done

[@dalegribble60]

Agreed, you can easily turn a micrometer into a pipe wrench or a adjustable clamp into channel locks....way to think outside the box!

[@robertalexander7661]

What’s wrong with using the right tool for the job?

[@kendigjl]

Hard to profit from a video that's only 3 seconds long.

[@backroadhustler8687]

Make a video on you using that same wrench with torque applied. Snap........

[@patbird9694]

We in the first world take tools for granted. People in the third world have to manipulate their current tools to complete a job. Hes not being wasteful hes being innovative.

[@StephenMesoros]

I got to agree with that one

[@tomvana4270]

Such a secret even the wrench manufacturer didn’t even know about it.

[@FrankShaw-g5h]

Looks like someone has no problem with wasting $$$$$$$.

[@tomvana4270]

What?@luchocastro1028

[@Michael-ek8rz]

The comments making me laugh so much !😂

[@notnow12345]

If I did this to my wrench, how am I going spin it around my finger and pretend I'm John Wayne as I walk across my work shop?

[@rogermcspodger]

Good one🤣🤣

[@rjmaxwell1963]

Basically you have to design and make your own tools. Ridiculous.

[@flyingsodwai1382]

What an entitled and world ignorant comment. Have fun with your fashion tools.

[@krakatoa1200]

Adjusting the spanner correctly might help, and then you could still hang it on the hook afterwards.

[@dsinsuatable]

do you have to do that? a vise grip over used cloth can do that.

[@thomashynd2291]

The title and thumbnail led me to believe I was going to see something amazing with the end of the adjustable as it was. I should have known better.

[@tommurphy4307]

welcome to the CLICK-BAIT TOOL CO.

[@davidshaffer4649]

i can think of 5 tools i have handy that i would use before i cut up a perfectly good adjustable wrench.

[@UltraUrutora]

Why didn't he just use the grinder for the pipe?😂

[@adriankolavcic2702]

Just open up the spanner, and with a wet piece of rag, put it on the fitting, you may need to fold the rag a few time's and then just adjust the spanner to fit and the wet rag will take up the slack. Oh and the hole at the end of this 10 inch or 12 inch spanner is to tighten any water mains spindle that might have an old washer in it.

[@RLS1010w-wh]

👍😇Das wissen aber nur Fachleute die die dieses Video produzieren sind Pfuscher!🧻😮🤯 Grüße aus Wien 🥂🇦🇹

[@tommurphy4307]

thats just about as half-assed as the rubber band trick for stripped screw heads

[@adriankolavcic2702]

@@tommurphy4307 It seems as you've never been employed in the plumbing industry.

[@turn-n-burn1421]

Lots of people can create their own tool. But if Channel Lock, Stanley or whichever company intended for a tool to be used in a certain way, they'd create that when making said tool.

[@kevinharms5158]

Years ago some innovative guy combined a nail puller with a hammer creating a claw hammer and said look Ma two tools in one pocket

[@tommurphy4307]

theyre wimps who are afraid of product liability

[@darrenkoenen2506]

I hand forged all my snap on tools into paint stir sticks. It’s brilliant. Now I don’t have to use the ones the paint store gives me.

[@dntlss]

ha ha ha ha, kinda like buying a motorcycle but having no money for gas then selling the bike and buying the gas,lol

[@garymucher4082]

What a total waste of a perfectly good wrench... Obviously he doesn't care for his tools like most people do.

[@Royale_with_Cheeze]

Might as well take an adjustable wrench and open it to just the right size for a particular nut you want to tighten or loosen and weld it shut just there. No need for pesky exact sized wrenches when you can just modify an adjustable wrench to the perfect fit.

[@estellesilva1404]

Ditto😮

[@willferrmail]

Thanks!

[@Sanan3]

Thanks Sir

[@sagitarius6461]

Yeah i already know it. But why in your buying unfinish crescent rench ?

[@wellla680]

Плять,мы ждем секрет ЭТОГО инструмента,а не как его испортить...

[@DanG-ug1ed]

You can buy a chain wrench, it will pay for itself compared to the time it took to make this one. Not only is there another tool that works well, pliers, just the plain wrench that you showed in the beginning works well. I know I used it today twice to install caps on pipe ends.

[@LynnJynh9315]

And chain wrenches are super underrated. Sometimes you need a lot of leverage in a tight space.

[@N-Lee]

Often times people want to make it themselves and save a buck or two. Kinda Handy to have a chain wrench on the end of a Crescent Wrench. 2 tools in One.

[@johnblackwell3580]

i bought a couple different chain and strap wrenches a few decades ago at a yard sale for 10 bucks, pretty cool you can make one....cheers

[@thomass8362]

Damn I guess I'll just throw my Channel Locks away now! lol

[@MexicanSCinVR-mt4ol]

Do you by any chance make the tools that show and sell them if someone sends you a message wanting something you’ve shown?

[@robertmcwhinney4596]

A lot of people don't know the secret of this tool, then proceeds to destroy a wrench! He's the TOOL lol!😉👍

[@tyrotrainer765]

I can't believe I just sat through that! You can get a perfectly good chain wrench for under $5 at a hardware store.

[@tommurphy4307]

thats just a wide half-inch chain wrench. try pricing a freewheel or cassette wrench from a specialty tool maker- youre in for tool-sticker-shock. see my comment above.

[@flyingsodwai1382]

5 bucks? What century are YOU from?

[@JoseManuelCamposSanchez]

Exactamente @tyrotrainer765 ¡hay llaves de cadena! 👍

[@tyrotrainer765]

@@flyingsodwai1382 Sorry, I meant $3. I'm in the PH and online the price goes from 1.5 bucks for a crappy one to around 2.5 bucks for one that lasts., which is what I've got for removing my 3 well filters. Still going strong after 2 years. Ok cheap crap, but it works on the few occasions I need it to, and it hasn't rusted away because I lightly oil it and hang it in my pump house.

[@arturogarciarodriguez3347]

That’s no secret…. Cheaper and easier to just go buy the tool!!

[@robertotto5811]

And all this time i thought they cast a loop on the end so i could hang it up when I was done using it. Turns out they did it so i could grind it off. Learn something new every day.

[@tommurphy4307]

but you could also hang it from a tool belt so you can forget its there and start running and have it smack you right in the balls....how clever would you feel THEN??

[@peterbaruxis2511]

Don't miss part two where we go out and buy a longer crescent wrench so we can hold it where we used to be able to hold this one for leverage.

[@michaeloconnell7372]

I'm not sure if the video is about stuffing up a good shifting spanner or how grind the handle.

[@АдамЛернер]

Зачем ключ ломать, можно было к любой железке цепь приделать.

[@ВовкаОс]

Вот именно, а сделал по сути газовый ключ ( клещи ) - велосипед изобрёл

[@paulschneeman1476]

Wonder how many PPL used Google Translate to see what the Russian had to say ?😁

[@flavius3896]

Crazy man. And when you are done loosening the plastic pipe, you can weld the wrench back together. lol

[@geniuspharmacist]

Pretty cool chain wrench for pipes, oil filters, and many other applications.

[@РустамСайфуллин-ы7ж]

Для этого не обязательно было портить разводной ключ.

[@askolddegersogerseau]

Ума ноль, что поделаешь?

[@dianasimon2060]

I would hate to use the wrench with that chain flopping around on the end.

[@tommurphy4307]

you could make it a quick-release chain with a cap screw and knurled nut.

[@schizy]

Great idea. Then makes the adjustable wrench so much easier to use with that chain hanging off the handle.

[@bricefleckenstein9666]

0:12 Try tightening it up. Of COURSE it doesn't get a grip when it's still loose!

[@williamadkinsbanishedtothe5057]

That's not a hidden secret, that's you are mutilating a perfectly fine tool.

[@ddave7026]

When everyone at the job sight say " Wow! Thats cool" (Laughing at you while you walk away)

[@MichaelRoberts-t7c]

Reinforces the never loan your tools rule...

[@anthonyvera8524]

Guys, remember, these people usually wear sandals to their unregulated, highly dangerous, shoddy construction projects. They don't have a lot to begin with, so this is revolutionary to them.

[@HypocrisyLaidBare]

Absolutely, this "sand pit engineering", it's revolutionary to them.

[@StephenMesoros]

I have to agree with th it's like you said some people ain't got jack s***

[@Adones09]

You have drills, angle grinders, chains, etc., then you ALSO have a simple wrench

[@mh-tn3ic]

Really, this is the secret we have been waiting for

[@anthonyiannone7618]

o yea thats a great idea ,to use the end of the wrench that was designed with the strength to hold is own weight on a hook, for leverage . In case you dont know a real chain wrench has a jaw like a pipe wrench to do the actual gripping , the chain is just used to keep the work piece in contact with that jaw.

[@davidwhite5858]

I told my kids that these tools you’re using are your tools. Mine are hiding under the work bench. Better take more care with your tools 😊.

[@ninjasagain1201]

That’s not a secret of that tool. It’s not meant to have that function. Nothing you have to modify is a secret until after it’s been modified and even then it’s only a secret until the modifications reaches social media. That would be like me calling the crescent wrench I grinded down to make an adjustable skinny wrench to fit between the nuts on a bmx hub a secret. Not a secret, just a modification. So, up until this video was posted, the only secret about this whole thing was your idea to modify a crescent wrench to add another function to it. And a great idea it is, imo. However, you can achieve the same, what I call, “vise wrench” with a sturdy 2x2 piece of wood, a back chain and a couple nails or screws. There are many other things that can be used to make one, but the materials I just listed are the bare minimum to get you through a project or two. I made one out of a bolt cutter handle and i can almost unscrew myself when I get myself into an undesirable position that usually comes right after I open my mouth and insert foot. Good job thinking outside the box.

[@tbruceroberts]

So they make a belt wrench that will spin that. You could also you a PIPE WRENCH and that's a pretty common plumbers tool.

[@tommurphy4307]

any wimp with money could do that- youre NO FUN

[@tbruceroberts]

@@tommurphy4307 you assume a lot.

[@Alotipsalo]

"This video was a real eye-opener! The revelation about this tool's secret was truly unexpected. The way it was explained was clear and concise, leaving no room for confusion. It reinforces the idea that there's significance in everything around us, if only we take the time to uncover it. A fantastic reminder to stay curious and keep exploring!"

[@carmgitto]

I could never understand why one would break a perfectly good tool to make an inferior one. This easily could have been made with steel stock and the chain

[@stevebishop4926]

or buy a chain wrench

[@RLS1010w-wh]

Elefanten oder Russen 👳‍♂️wissen es nicht besser!🧻🙉😇

[@regd.2263]

I've got the very chain wrench he's made for removing oil filters on my car, now every time he uses that wrench as a wrench he will have watch he doesn't cut himself.

[@Belly-u2w]

But then you would never learn "the secret".

[@terry_willis]

I wanted to do this, but I'd have to buy an angle grinder and a drill press to do it. That would cost lots more than just buying that specific tool.

[@BunkerAudioPanama]

Not to mention the bike you need to get the chain off of

[@williamvolkmann8658]

All you need to do is thread the chain thru the hole and place a cotter pin to make the desired size

[@brnmcc01]

Also, improper use of the side of a cutoff wheel for grinding. Cutoff discs are for cutting only, they're thin and can shatter sending shrapnel of shattered cutoff disc's everywhere... Getting a chunk of a cutoff disc embedded in your face isn't very fun...

[@dalegribble60]

He forgot to show how he turned the grinding disc to a cut off disc so in reality it still is.

[@martinkuliza]

HOWEVER.............IT WOULD MODIFY YOUR FACE possibly in the same way the wrench was modified

[@MattGuzman-ng2yx]

​@@martinkuliza 😅😂👺😞

[@tommurphy4307]

good point- you can get an angle-grinder and arbor thats made for side-grinding rather than cutting. cheap, lazy guys like to just buy the thick cut-off wheels for that.

[@tommurphy4307]

..or the neighbor's face across the street if it fails at full speed@@martinkuliza

[@markr.1984]

Just use a channel lock type tool on that with maybe a piece of rubber to prevent damaging the PVC. About 20 times quicker than destroying an adjustable wrench!!

[@rickpressnell7914]

Just buy a strap wrench already!

[@breezybmetal8646]

So are you going to cut up your adjustable pliers as well?

[@tommurphy4307]

stay tuned....

[@brushst59]

I had a 12” crescent wrench that I cut into a a set of 8 small open end wrenches and it only took 38 days. Doing that was about as good an idea as this video was.

[@tommurphy4307]

call mattel and barbie- you just invented a set of tiny wrenches for ken

[@danmuscarella785]

😂😂

[@macforme]

@@tommurphy4307 WAIT A MINUTE! Barbie is a liberated woman... she might want to tinker around too.... He needs to make a second set for her, because Ken never cleans or puts his tools away neatly... just leaves them around the shop and can never find the one he needs. 😂

[@ACME22]

I think the objective was to get 3.3 million mechanics watching in disbelief. Mission accomplished🎉

[@wooddoug1]

Cutting into a wrench with an angle grinding under isn't a hidden feature, it's a major modification

[@thomasryan5681]

So in other words....buy a chain wrench.

[@ГеоргийКостюк-т6ф]

Вообще то для этих целей есть газовый ключ

[@НиколайГрибов-щ2ш]

Ничего глупее. Нельзя придумать......или от нечего делать. Это все древнее изобретение ..

[@ЕвгенийЕрофеев-ю9р]

Это не секрет инструмента а дебелизм "мастера"

[@stealthnthunder]

Awesome Idea! Man of Skill, 💡👍👌🤔 Might Have to Make One! 👏🙂

[@larryyoderlarryyoder353]

Why in the world would you do that to an adjustable wrench? They make chain wrenches that you can usually buy cheap.

[@navret1707]

So I’m supposed to destroy a perfectly good crescent hammer to make a tool that I can go to NAPA, TrakAuto, etc and buy a chain oil filter wrench. Or a pair of channel locks. I don’t think so.

[@GooseAssassin]

Amazing, it looked like it was hand tight

[@lauramurman2642]

That's a lot of work for such a simple task. Besides, what if I don't have a chain, an angle grinder and a drill? Guess the wrench alone will do the job, if/when used properly!?👻❤

[@6milesup]

Yes. Another retarded "look at what this can do if I modify it enough" video.

[@tommurphy4307]

then youre almost a toolmaker- almost.....

[@RodneyTyo]

I guess he didn't have any other option! Watching stuff like this destroys brain cells.

[@tommurphy4307]

he IS pretty handy with that angle grinder- no welder/fabber would be caught dead without one.

[@Jeff-ik8in]

Dumbest thing I have seen anyone do in a while.

[@paulb88916]

This could be the secret of any piece of metal that already has a hole in it 😂