How to Replace Radio Bezel 2004-2015 Nissan Titan

Shop for New Auto Parts at 1AAuto.com trq.video/c-274-W
This video shows you how to install new radio bezel and buttons on your 2004-2015 Nissan Titan.
This repair was done on a 2004 Nissan Titan SE 5.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Phillips Head Screwdriver trq.video/oaYE...
• Pocket Screwdriver
• Trim Tool Set trq.video/oS9-...
• Pick trq.video/oC4-...
Subscribe: / @trq
Check out our playlist:
Nissan Titan 2004-2015 1st Gen: • Nissan Titan 2004-2015...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@jimb7297]

My 2004 Titan says hi! Lots of dash and shifter cracks and damage but your video is giving me confidence. I put a Northstar Liberty truck camper on it and take it to some "rustic" places. I do invest in it but the pleasure it gives wifey and I is worth the cash.

[@kennethmasonjr845]

This is definitely the best video on this by far.

[@tomkoala2903]

Great video I replaced mine on my 2006 titan.But make note of which radio you have I have the Rockford fosgate system and the bezel I purchased did not fit .the radio hvac plate did not fit . there are three types of bezels they look identical till you put the face back on. The cluster i need is no longer available so i have to now replace the stereo to a screen version..

[@revbradl]

I appreciate the video. It was very helpful to me replacing the radio bezel on my 2004 Nissan Titan. Too bad the original bezel hardens, cracks and breaks apart. Hopefully, my cheap Amazon replacement will last longer.

[@slugglife9527]

If that radio bezel is fractured and needs to be replaced, as mine is, then I’m assuming the other plastics I have to remove are going to break as well. And if it will ever go back together the way it was. Hesitant to do this job.

[@909chchis]

Very helpful video. i only needed to replace the center dash bezel. I did not need to remove the top steering wheel bezel so that saved me time. Thank you

[@northwestlife_9]

Excellent video! Really well done. Having someone else do the work while someone else shoots, then record audio later is so much better.

[@noroomforgloom]

Finally found a useful video on this subject. Excellent 👌

[@MrDanGroup]

This by far is the best detail video on this particular procedure. Great job guys.

[@TRQ]

+Nigel Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@briangimbel7973]

Great video!! I had the dash speaker to deal with, so some added complexity. Also, my replacement bezel didn’t come with the power socket plastic pieces already installed as yours appeared to and getting those back in was a PITA!

[@MikeS-c9q]

EXCELLENT PRESENTATION! Clearly expressed and clearly illustrated! Keep up the good work! Many thanks!

[@joelviramontes105]

This dude removed too many other things when you didn't need to

[@bmorekid28]

Awesome video. No fluff straight to the point. Thanks 👍

[@trumpeteer4792]

Great narration, looks simple. I'm off to do mine now. Hope it's that easy for me 🤞🤞🤞

[@rebel2032]

dude live saver and saved me some money in the process!!!!

[@scottgardner615]

Just know that this plastic is like peanut brittle and you may damage the instrument panel bezel and radio face while doing this. 🤕

[@laruewiggins2041]

I have an Armada. Is there anything different for the video screen?

[@kennethpeterson5610]

I want to remove the bezel so I can mount my ham radio control head on the shelf on the bezel. I need to run a flat cable similar to a Cat 5 type cable in the seam of the bezel. I will need to cut a small notch in the seam to let the cable go through to the underside of the dash. Is this much teardown necessary to just remove the bezel? I am not going to remove any wires just get some room to run the cable. What is the part number of the bezel so that I can order one if I break the original?

[@snowballisg]

um there is no need to remove the steering wheel bezel ?

[@SBXslick]

The Radio Bezels I have found all say for a 2004-2006, do you know if these will actually work on a 2008?

[@TRQ]

+Steve C If your year is not on the listing, it may not fit your vehicle.

[@Po7ent]

You gotta be trolling us.. all this just to replace the radio haha.

[@mikerrobes]

Excellent video. This was very helpful.

[@555Horsepower]

great video!

[@umoronius]

Excellent presentation! Clearly and professionally expressed! Well Done!

[@goliac492]

Well done.

[@mangoexp9532]

Great, just broke the connector to my radio.

[@Thongballlllll]

awesome job!

[@pedroramos3389]

looking for an 2007 titan bezel with rockford fosgate ..... where can i find one?

[@allanorozco8467]

Amazing Video!!!!! THANK YOU!!!!

[@nyfatkeungusa]

Thank you very helpful

[@stephendamico5570]

One 2017 Pathfinder second row seat does not stay Down

[@JulianFRosales]

How to remove your entire interior just to get to the center bezel

[@Mrkevi123]

Why didn't nissan split this giant cluster into 4 peices??

[@gtdodgeviper]

Why is it so damn expensive?

[@Zx14rrrrrrrrrrr]

This part sucks. Thin plastic stuck behind parts for no reason. It should be make to pop right out.