√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@kennethloki70112 ай бұрын
For those asking about greasing the bearings, dont. It can cause the bearing to fail early. They are designed to be lubricated from the gear oil. You can put some gear oil on the bearing after installing it if it makes you feel better, but it isn't needed. Once you re- assemble everything and add the gear oil to the differential housing, the wheel bearings will get coated at that time.
@randyb3347 Жыл бұрын
Nice. I'm reviewing this before I do the same to mine. I'm a bit surprised you don't put any grease or gear oil on the bearing when you install it. Not sure how the oil gets from the dif to the bearing. Is it just the spinning of the axle? Excellent, thank you!
@JohnGarris-i3t Жыл бұрын
Nice video for replacing rear wheel bearing but ounce you replace the one side do you just pull the otherside off also to change the bearing the same way.
@sinwoovts41 Жыл бұрын
what’s the part that the caliper bolts go through and holds the caliper. it also gets the backplate bolted onto it with the small bolts. it has the 4 bolts
@mgw4205Ай бұрын
When you walked those spider gears back into place was the truck in park?
@carycampbell1398 Жыл бұрын
How do you know u need bearings and a axle I have a popping when I take off and reverse but stops after a few seconds but my drivers side tire has tire wear on the inside
@akjames83075 күн бұрын
How would get bolt out if it broke off
@philtaylor62177 ай бұрын
Could you put the tool kit number? The exact bearing puller you used. I did my seal and 1mnth later leaking again. Gonna do both seal and bearing this time
@gerardopedroza6 ай бұрын
I have a 2004 Durango does it gave wheel bearing on both sides of the rear wheels
@TRQ6 ай бұрын
+@gerardopedroza Yes, your vehicle should include wheel bearings on each rear wheel.
@gerdihalla52963 ай бұрын
What is the name of the pull-out tool from stock to 8.35 minutes
@daviddenson33248 ай бұрын
I assume it is no different for the right rear passenger side as well, correct?
@1slow5point0 Жыл бұрын
I always put a thin film of clear silicone on the outside of the seal to prevent any leaks. Never had any seals leak by doing that. Cheap insurance.
@Dashewthadowg Жыл бұрын
Is this the same for both sides? I am assuming it is?
@danielquiroz82946 ай бұрын
Do these parts fit on a 2007 ram?
@redneckgreenthumb433 Жыл бұрын
i have a moog bearing, it doesnt need to be packed?
@richardgarcia4843 Жыл бұрын
Hi, thanks for your video. Can I do the same for a RAM 1500 year 2001 2ND GENERATION? it has drum brakes
@BestTigraymusic Жыл бұрын
I LOVE TRQ thag they prove it viedios channel! But they post a lot per day i don't feel to finish the at lest to watch one short vedio
@frodobaggins32486 ай бұрын
Really helpful Thanks
@ecsmuv2 ай бұрын
Thanks a lot, perfection
@fgarcia544610 ай бұрын
So You dont need to grease the bearings ?
@ricmigd Жыл бұрын
Golden information
@TRQ Жыл бұрын
+Richie Hill Thanks for the feedback! 1aau.to/m/Shop-TRQ
@pesnet7 Жыл бұрын
Qual o oleo do diferencial ?
@samizdat113 Жыл бұрын
I hate the way gear oil smells
@james-im1sj Жыл бұрын
Good video
@richardsosa8421 Жыл бұрын
Nice thanks
@scottr83603 ай бұрын
That is complicated. It's good to know what you're paying for.
@Annapolisprep Жыл бұрын
What about inner bearings
@miguelpenaflor8073 Жыл бұрын
You forgot to pack the bearing sir.
@ricmigd Жыл бұрын
Golden information
@TRQ Жыл бұрын
+Richie Hill Thanks for watching our video! 1aau.to/m/Shop-TRQ