How to Replace Rear Bearing and Hub Assembly 92-01 Toyota Camry

  Рет қаралды 70,225

1A Auto: Repair Tips & Secrets Only Mechanics Know

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Пікірлер: 51
@1AAuto
@1AAuto 3 жыл бұрын
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@bslav94pgt
@bslav94pgt Жыл бұрын
As someone said earlier, you do not need to remove brake components if you’re somewhat handy you can get the bolts in and just remove the hub assembly itself. Took me about an hour and 3 miller lights with a battery impact. That being said , thank you guys at A1 for a great video and a great part, it fit perfectly.
@dylanwebber763
@dylanwebber763 4 жыл бұрын
Confirming: YOU DON'T NEED TO REMOVE THE BRAKE COMPONENTS. THE HUB ASSEMBLY BOLTS ON INDEPENDENTLY
@gailjones9155
@gailjones9155 3 жыл бұрын
You are the only dude on the darn internet that removes the brakes to replace the hub assembly!!!! You have miss titled your vid, or you're from another planet!!
@robs1852
@robs1852 3 жыл бұрын
It looked like he installed new brake shoes and hardware so I guess he figured it was easier to remove old shoes then do the hub while there was more room
@oby-1607
@oby-1607 2 жыл бұрын
Very well explained. My bearing is starting to make a noise so this is the route I am going. Thank you..
@Elmer_RedEagle
@Elmer_RedEagle 5 жыл бұрын
That made no sense, after watching this then doing it. I didn't have to remove the brakes like you show.
@user-od4op6ng9y
@user-od4op6ng9y 4 жыл бұрын
You're right. All the other videos I watched none of them removed the brakes. Just the hub cover, remove 4 bolts, remove old hub, install new hub, hub cover and wheel. Im going to attempt this next week.
@jeremyturn8516
@jeremyturn8516 4 жыл бұрын
That will save me time
@dbfcrell8300
@dbfcrell8300 3 жыл бұрын
**** THIS VIDEO SHOWS REMOVAL OF THE BRAKE SHOES AND BRAKE HARDWARE WHICH IS NOT NECESSARY. While these 1A AUTO videos are usually extremely helpful, and we should all thank them for them, this particular video shows that the wheel bearing procedure requires removal of the brake shoe assembly which is NOT correct. The brakes and rear bearing/hub assembly replacements are totally independent of each other making either optional once the drum is off. It should be noted that a rear brake job is definitely easier to do with the bearing/hub assembly removed.
@matthewjohnston7071
@matthewjohnston7071 Жыл бұрын
Is this the same way for disc brakes? The hub assembly part
@markymark560
@markymark560 3 жыл бұрын
I want to change the hub carrier on the rear camry 1998 and I am looking to find out if it is easy to remove the brake baking plate? Is it just held on with the 4 axel hub bolts. Mine has rear discs with a smaller drum for the handbrake. Is it the o ring keeping the brake plate on aswell?
@3r8mo
@3r8mo 3 жыл бұрын
Do I need to buy new o rings for this project ?
@jimmypersaud119
@jimmypersaud119 2 жыл бұрын
great job, very informative
@arifmesfin2610
@arifmesfin2610 5 жыл бұрын
Thanks so much very helpfull just watching this video i did it my self my o7 camry
@1AAuto
@1AAuto 5 жыл бұрын
+Arif Mesfin Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@dvader3000
@dvader3000 3 жыл бұрын
I just did this on my camry 99 and I didnt have to remove any of the brake components. For real,nothing got on the way to remove or to put it back,I did both sides,no problems.
@Tammadrummer1337
@Tammadrummer1337 3 жыл бұрын
If I'm using a jackstand instead of a lift, how would that work? Do I put it in neutral with E brake? Not seeing how I could move the wheel bearing to unbolt it without the whole car moving.
@nate_k123
@nate_k123 2 жыл бұрын
Leave that thing in park
@imad96123fly
@imad96123fly 3 жыл бұрын
Anybody know if the 2001 camry CE 2.2 Cylinder has ABS or not? Please much appreciated
@jacefac3113
@jacefac3113 2 жыл бұрын
2.2 cylinder 😆
@Tyufoe96
@Tyufoe96 2 жыл бұрын
Does this translate well to the '96 avalon?
@soundlesspeal
@soundlesspeal 4 жыл бұрын
i bought my bearing from a local car shop and it only had the bearing. how do i change my old hub into it?
@eddiearndt1949
@eddiearndt1949 2 жыл бұрын
Confirmed u do not have to remove the brake shoes. I think the reason why they show this is to save time and money filming.
@nathanducharme5697
@nathanducharme5697 3 жыл бұрын
Thank you!
@mergeform
@mergeform 5 жыл бұрын
don't really have to remove brakes on 2000 Camry, but don't drop the socket behind the brakes
@Infamousnacho83
@Infamousnacho83 6 жыл бұрын
do you have the ebrake on or off when adjusting the drum with the star raching??
@1AAuto
@1AAuto 6 жыл бұрын
+Infamous KN It should be off
@jamileepiatt9760
@jamileepiatt9760 4 жыл бұрын
I don't have the abs wheel what part should i get
@1AAuto
@1AAuto 4 жыл бұрын
+Jamilee Piatt That part can be found here: www.1aauto.com/toyota-lexus-rear-wheel-bearing-and-hub-assembly-trq/i/1ashr00081/374304/1997
@MW-mp5fu
@MW-mp5fu 6 жыл бұрын
Is this the same process for 2001 Avalon
@1AAuto
@1AAuto 6 жыл бұрын
+Mike Watson Hi Mike, Here is a link to the replacement wheel hub bearing assemblies that we carry for you vehicle and also an auto repair video that will show you how to perform the repair. goo.gl/kP1Sv1
@ewzm
@ewzm 4 жыл бұрын
Mine is still running smoothly but the grease is old and partially dried out. Is it possible to just clean out the old grease and replace with new grease rather than replace the assembly?
@daveg4018
@daveg4018 7 жыл бұрын
Is this the same process for 2010 Camry?
@1AAuto
@1AAuto 7 жыл бұрын
+Dave G Here is a link to the replacement part that we carry for your 2010 and also a video of how to install it. Hope this helps you out www.1aauto.com/wheel-bearing-and-hub-assembly-trq-bha53296/i/1asfk00079?f=351639&y=2010&KZbin&CTA%20Comments&
@daveg4018
@daveg4018 7 жыл бұрын
Wow that was a tough job. If that happened to me, where I did not have a press available, can you buy a new backing plate and start from scratch? If so, do you carry them?
@jabbaweezy
@jabbaweezy 3 жыл бұрын
Wish someone made videos on 6th gen celicas
@1AAuto
@1AAuto 3 жыл бұрын
+Jabbaweezy We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
@Usmanthemecano
@Usmanthemecano 3 жыл бұрын
Why did you remove the brakes?????
@1AAuto
@1AAuto 3 жыл бұрын
+Usman The Mechanic Thanks for checking us out! This was an additional repair we did in the event you wished to change the shoes when you had the hub off so you could see how to do it. 1aauto.com
@grimreaper3143
@grimreaper3143 3 жыл бұрын
My 99 Toyota Camry doesn’t have the brake drums has a brake disc
@gapratt4955
@gapratt4955 6 жыл бұрын
Exactly what I thought, bulk of the job is dealing with the brakes!
@gailjones9155
@gailjones9155 3 жыл бұрын
The whole darn vid IS about the breaks !
@HaNg_ALL_ThE_tRaItOrS_hiGh
@HaNg_ALL_ThE_tRaItOrS_hiGh 3 жыл бұрын
You do not have to remove any brake parts to do the wheel bearing.
@bryan10444
@bryan10444 2 жыл бұрын
DONT REMOVE THE BRAKE SHOES
@RogerReeves-p9s
@RogerReeves-p9s Жыл бұрын
😅
@nickcanfield9919
@nickcanfield9919 2 жыл бұрын
We
@maxy274
@maxy274 5 ай бұрын
The guy from the video is not very professional and don’t use the right tools how i saw it on a other video very easy en more care about the parts
@jabbaweezy
@jabbaweezy Ай бұрын
5:22
@jbwright0162
@jbwright0162 7 жыл бұрын
Is this the same for a 92 Toyota Camry xle v6
@1AAuto
@1AAuto 7 жыл бұрын
+jarvis Bad Hurricane This would be the same procedure on a 92 Toyota Camry. Thanks for watching. 1aauto.com
How to Replace Rear Drum Brakes 1992-1996 Toyota Camry
20:38
ЗНАЛИ? ТОЛЬКО ОАЭ 🤫
00:13
Сам себе сушист
Рет қаралды 3,7 МЛН
Kluster Duo #настольныеигры #boardgames #игры #games #настолки #настольные_игры
00:47
龟兔赛跑:好可爱的小乌龟#short #angel #clown
01:00
Super Beauty team
Рет қаралды 94 МЛН
How to Replace CV Axle Passenger Side 92-01 Toyota Camry
10:02
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 251 М.
Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!
10:11
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,6 МЛН
How to replace rear wheel bearing on Toyota Highlander
24:18
Toyota Maintenance
Рет қаралды 44 М.
Front Wheel Bearing Hub Diagnosis and Replacement - Buick, Chevy, GM
26:43
Blue Cyberia Music
Рет қаралды 473 М.
How to replace rear wheel bearing/hub on a 2001 Toyota Avalon
17:12
Almost Right By Mike
Рет қаралды 10 М.
🔧🔧🔧 How to Change Toyota Camry Rear Wheel Bearing! (2012 - 2015)
11:23
Dan's Guide to Everything
Рет қаралды 24 М.
How To Replace a PRESS IN Wheel Bearing ~ On The Car
30:32
HumbleMechanic
Рет қаралды 1 МЛН
How to Replace Rear Drum Brakes 97-01 Toyota Camry
11:53
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 283 М.
Top 5 reasons why the suspension knocks | AUTODOC tips
8:14
autodoc.co.uk
Рет қаралды 1,4 МЛН