How to Replace Rear Brakes 10-14 Mercedes-Benz E350

Buy Now!
New Brake Pads from 1AAuto.com 1aau.to/ia/1ABPS02901
This video shows you how to install new, quality TRQ brake rotors and pads on your 10-14 Mercedes-Benz E350. Head over to TRQAutoparts.com for more info!
• Check here for more videos on the 2009-16 Mercedes-Benz E350: • 2009-2016 Mercedes E350
This process should be similar on the following vehicles:
2010 Mercedes Benz E350
2011 Mercedes Benz E350
2012 Mercedes Benz E350
2013 Mercedes Benz E350
2014 Mercedes Benz E350
2015 Mercedes Benz E350
2016 Mercedes Benz E350
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 18mm Wrench
• 17mm Socket 1aau.to/oa/1AXAA00015
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• T30 Bit 1aau.to/oa/1AXAA00008
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXSS00035
• Copper Anti-Seize
• sanding disc
• 7mm Allen Wrench 1aau.to/oa/1AXAA00007
• Hammer 1aau.to/oa/1AXAA00091
• Rubber Mallet 1aau.to/oa/1AXAA00413
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
2009-2016 Mercedes E350: • 2009-2016 Mercedes E350
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@justaddwata]

My advice to anyone attempting this - be sure to get a 7mm allen socket in advance. I was surprised to find that of my 8 odd sets of sockets and keys - only the cheap and nasty set had the all important 7mm. Good video - never hurts to see what I am up against before I start!!

[@ChandraSQLVideos]

Really Great video...👏👍 Gone through at right pace...Just watched the video as an enthusiast to see how it's made.

[@johnteoh9504]

Thank you! This is a professional how-to video with high-quality easy-to-follow instructions. The torque specs match the Mercedes WIS specifications.

[@paulh9956]

Excellent video and no nonsense explanation. Thanks for posting

[@wangshuokevin]

Best brake job video on youtube ever. Keep up the good work! Would be nice to post brake change videos for 2018 XC90 and 2013 Audi S4/5 as well :)

[@williambrandt9254]

Thank you for making these instructions clear and concise. I was interested in learning that the lug nuts were torqued I read to 100 foot pounds you say 95 foot pounds but every other Mercedes I’ve ever had it was always 80 foot pounds but these demand more torque. Thanks again - you have one of the better KZbin videos.

[@SuperZmeister]

As usual, it takes more time to remove the wheels than replace the pads! Thanks for the torque tips.

[@anfrae25]

Great job. Thanks a lot. Some people always have something negative to say no matter what. I appreciate your time and effort.

[@MrKingNica]

Thank you so much for this video

[@Artem_ZpCity]

Thx for Video , U are the Beat !!!

[@ajonsson2013]

High quality video. Keep it up

[@cc12h22w]

No complains the guys knows his trade very good .

[@6969tomahawk]

Great educational video 👍👍

[@GonzalezEzekiel]

Finally I see someone use a torque wrench on these. Good job sir and straight to the job too thanks a lot.

[@TRQ]

+GonzalezEzekiel Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@tudorstefan8892]

Very good video, many thanks!

[@ciprianstanciu640]

Thank you

[@mikebryant5223]

I believe MB calls for the caliper mounting bolts to be replaced, not re-used, and to use threadlocker in addition to torqueing to 85 ft/lb. Same both front and rear.

[@sukiiish]

Hello, how much moment are u using with moment key ?

[@foedahaterz]

Is that a 3/8 or 1/2 inch drive on that impact drill?

[@olid-p870]

Handbrake adjustment?

[@emersonrivera2981]

Hello @TRQ would I need to pump the brake pedal after finishing every wheel? Or can I replace both sides of the rear brakes, proceed to pump the brakes and then move to the front and follow same process?

[@cosme112002]

Is this same for 2010 E550?

[@Spooky4815]

Im guessing that i cant hit the rotor like that if im planing on reusing it?

[@123Sander1231]

why would you take it off if you want to reuse it?

[@houstonswisha143]

Nah bro you would only have to take it off if you’re replacing the entire rotor and brake together. Since you’re just replacing the rear brake pads you will just take the wheel off, unscrew 7m Allen heads, and replace the new brakes in the caliper and then reinstall. The excess work in this video is because he is also installing new rotors.. hope that cleared it up for u

[@punjabinetworld1695]

Did you change the senor or kept original? and are break sensors on boths sides??

[@BlueCollarClub]

Depends. One on the bac one on the front in this case

[@delboy2596]

You didn't readjust the handbrake to suit the new discs.

[@michaelwielenga8809]

lets try to not spray anti-seize on the parking brake shoe if you can avoid it.

[@joelaquino348]

Flex+TorqueWrench 100%da best tool

[@jamestorres2920]

What’s the cost for all 4 brakes

[@justaddwata]

Not sure about the poster - but I picked up a set of 4 power stop drilled and slotted rotors, carbon pads, and sensors from Amazon for under $400. All up it took about 4 hours with hand tools and stubborn rotor removal. Believe Mercedes were in the $2k range when they quoted the wife.

[@janetpinkpoodle3946]

Please explain why most every mechanic claims on Mercedes Benz every time you change brake pads you have to change rotors and I always argue no you dont

[@fajrcuthbertson12]

I’m really about to do this to my Benz. Because I don’t want to pay 700 to get em fixed

[@123Sander1231]

You didnt spin back the rotor to fit over the new brakes. You need special tools for this.