√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@jamalbrody5543 жыл бұрын
I realize it is kinda off topic but does anybody know a good place to stream newly released tv shows online?
@texassteven89885 ай бұрын
This is the most excellent & thorough brake video I’ve ever seen. Thank You… I saved $450 in labor costs by using your video as a tutorial to replace the brakes on my 2014 Honda Accord. I am much obliged to y’all. Thanks again !
@pcrengnr17 ай бұрын
Thx for sharing. I came to learn how to reset the caliper piston. Knowing that it has to be rotated back to reset its home position was the ticket for me. Again, thx for sharing.
@MrRdporto4 жыл бұрын
Watched this video 3 times as its the best tutorial video that I have come across. I let the commercials run to their full length just to help out your channel.
@vernonwolley899111 ай бұрын
Very, very high quality video! Best I have seen. If I was so inclined to tackle this job. No mas though. If I had a lift I would probably make a run at it. Thank you for including the torque specs and pointing out the details to get the job done right the first time!
@TRQ11 ай бұрын
+Vernon Wolley Thanks for watching our video! 1aau.to/m/Shop-TRQ
@beb15273 жыл бұрын
Watched quite a few of these before I change out my pads & rotors. Like this one the best. Thanks!
@danr19203 жыл бұрын
Telling us the torque specs is a nice touch. Thanks. A though video.
@ammarmustafa4496 Жыл бұрын
Thank u for this video but the torque for rear brake caliper is 17 ft-lb for accord 13-17
@javier2322 жыл бұрын
I bought the brake set from and back from 1a auto and I don't regret it.
@richardfabrizio8998 Жыл бұрын
That was the best demo ever. Thanks
@timallen6593 Жыл бұрын
Excellent video, great step by step instruction !!!!
@TRQ Жыл бұрын
+Tim Allen Thanks for watching our video! 1aau.to/m/Shop-TRQ
@deborahfacciani68433 жыл бұрын
Most through video I have seen for brake replacement
@TRQ3 жыл бұрын
+Deborah Facciani Thanks for the feedback! 1aau.to/m/Shop-TRQ
@omarcarrillos27272 ай бұрын
Thank you!. Now Thanks to HONDA I need to buy or borrow the tool to push the capiler.
@ioandudas47724 жыл бұрын
Very good video,explain very nice every step...
@kylecordle794 Жыл бұрын
I've never seen anyone else have the pads sit in the shims without brake grease. And I know it's a practice to grease the caliper, but it allows dust to collect on the grease
@ochiedecenavillardo88772 жыл бұрын
Thanks to show that replaces rear brake pad and rotor
@larryzapotocky13632 жыл бұрын
Do you have to open the master cylinder lid when you compress the caliper back in to relieve the pressure?
@AgeOfGrace2023 Жыл бұрын
Thanks buddy, appreciate the video.
@k9casablankino8452 жыл бұрын
Great job! Very thorough
@albertompenaloza25052 жыл бұрын
Thanks a bunch for Your valuable info. 👍😎
@TRQ2 жыл бұрын
+alberto m penaloza Thanks for watching our video! 1aau.to/m/Shop-TRQ
@jamesrichardson7713 ай бұрын
Very Nice" 💥 🤙 🛠
@jedknutson83734 ай бұрын
must I use that block to turn the piston? thought I heard a 3/8 extension fits in there perfectly...perhaps not...
@NeoAndersonReloadedАй бұрын
Got to justify the 3hr quote😂
@alitena1542 жыл бұрын
NICE!
@myyube813 жыл бұрын
Those boots looks really inflated....good idea to bleed them after greased
@SUArmy123 жыл бұрын
Ran into this issue when I did mine. They seem to go under vacuum and don’t move as well when you force the air out. Is that the way they would come from factory?
@ArlenDelcastillo3 жыл бұрын
What kind of material are the bristles made of on the bore brush you use to clean the ports at 8:20?
@BronzeLincolns814 жыл бұрын
and i sit around complaining about how hard it is to do repairs on my chrysler. that was a lot of work just to change out the breaks on that honda.
@markwarren79593 жыл бұрын
Try dong a brake job with drums. This is a walk in the park.
@eddieshell Жыл бұрын
You forgot to put the screws back in the road or you can clearly see how they’re not in there
@luissantiago147 Жыл бұрын
Why didn’t you cover adjusting the E brake?
@xr500t5 ай бұрын
Waaaaay too much grease on the pins! in this case, more is not better.
@TRQ5 ай бұрын
+@xr500t Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
@PSimon-xr3pw2 жыл бұрын
Why did you have to unbolt the bracket for the ebrakes?
@kazymerchyk Жыл бұрын
You don’t have to, but it makes getting the caliper to clear the rotor to remove it easier
@jamesadamgleason9471Ай бұрын
A c clamp will work in place of that fancy tool nobody owns lol