Rear Brake Caliper Replacement - 2013-2017 Honda Accord

[@s4nm4n97]

Just want to say Thanx for this video. I just replaced the rear calipers on my wife's Accord today. I've done alot of brake work, pads, front caliper, rotor and even bending and flaring my own lines, but not without the help of a mechanic buddy of mine. This was my first set of caliper replacements solo along with bleeding (always been the pedal pumper, never really seen what happens on the other end) and your video made it seemless. I even watched and made the self bleeder bottle you suggested. Thanx a TON!!!

[@jamesbroomfield7799]

Great vid. Straight to the point, no bs in between. Thanks for the vid

[@amacd08]

Great to see somebody working on an Accord that's crusty like mine. Great video! Keep up the Accord content!

[@zigwil153]

Constructive criticism... if you, or someone you care about, will be working on the car again use a torque wrench. Any cheap torque wrench is better than not having one. Nice vid!

[@raymondlosier8065]

It was more than helpful..i just had to install them on my 2016 honda accord touring and i was wondering about how difficult it was to install them..you came to my rescue with your detailed video....

[@michaelsharpe2413]

Very well done easy to follow wish all videos were as easy as yours keep up the great work.

[@joeo8396]

Great video, I found a pair of calipers for under 100.00. Installed, no problems. Thanks!

[@jpmyers20]

Great video! Helped me fix my daughter's Accord.

[@vincentle8857]

Awesome camera angle. Perfection at its finest video. Thank you.

[@calviny9384]

Thank you for this video. I have this exact same problem. I tried tightening the brake line from inside the car's center console, but it didn't work. I got quoted $800 for labour and parts for this job, but looks like a simple sunday DIY 👍

[@andrewamarone9578]

I was just quoted the same. I thought it was bonkers and ended up here. Going to tackle it in nice afternoon.

[@hunterw.4603]

@@andrewamarone9578bro Ig everyone charging $800 for new rear calipers/ rear brakes it’s insane went to get my whole rear end done and they wanted 900 for calipers pads and disc

[@eliteexposure5594]

Best video on this issue!

[@mixedboi]

Subbed right away, very nicely explained thanks man, mine are on the way, good boost of confidence right there.

[@segovian]

Excellent video. Just replaced all four calipers on my car .

[@joshsailer5721]

Perfect video, I'll be tackling this project soon!

[@juanvideofotos]

Thank you! Excellent detailed video. My 2014 Acura ILX the process is almost the same.

[@jianguoyao]

Nice clean job. Very helpful.

[@zingo2664]

Excellent video!,thank you for posting ,10/10

[@terrenceg3257]

Good details!

[@JWD1992]

This is great. Very easy to follow. I have a 2015 Accord which already had 194,000+ miles on it before I just drove it from New Jersey to Nebraska. I noticed the parking break is loose. It seems to engage, but I have to pull it back quite a bit. It is extremely loose when I first begin to pull it. I was thinking it just needed adjustment (like you show at the end), but now I wonder if it is seized where it connects to one of the calipers. I will have to get in there when I am able to do it right. If I have to replace anything, I will know how. Thanks.

[@NeoAndersonReloaded]

Ur rotors warped? Car Shaking? Use a temp gun for drag.

[@Von.NorthEnd]

Thanks man. My mechanic was giving me the runaround I said fck ima do it myself. I didn’t have a compact gun so it took longer but thanks man

[@richardfabrizio8998]

Great job very informative. Wish you gave torque specs. Thanks again

[@davidtavares2820]

Well, explain congratulation. keep doing your work 🙌🏽🙌🏽🔥

[@jeffreydrhodejr411]

Great video!! I’m going to get to work!

[@basavaa3877]

Thank you, great video. Do you have any recommendations for aftermarket brand for calipers similar to OEM quality?

[@robertopacheco6266]

Thanks blessings

[@127001er]

A great video. Thanks for the tips!

[@andrewrodrigues2865]

As a first DIY replacement of of calipers on my 2014 accord, do you think this it's advisable to undertake this job on my own?

[@andrewtoombs]

Thanks!!! This is very helpful

[@vico21y]

Great video. Images was so crisp. What aftermarket brand of calipers are those? How's the performance since then? Thanks in advance for your reply.

[@tmuka]

thanks for the helpful video!

[@valeryfeoktistov4349]

Отличное видео! Очень помогло!

[@bankzz7166]

This was a great video thank you 🙏🏽🙏🏽

[@lexsemenenko]

Thank you!

[@kencrowe5454]

Great video very helpful

[@NeoAndersonReloaded]

My cables under the console arent equal. Also, having hot rotors in the rear 190degree vs front 140degrees

[@josephgonzalez4418]

Vey helpful thanks

[@cglim1090]

Excellent video! Good~~~

[@luissantiago147]

I’m experiencing a e brake issue. Even after adjusting the cable and pulling up the brake the car still moves. I did a complete brake job I changed the front and rear rotors and pads. I also, replaced the passenger side rear caliper. When the car was purchased at CarMax they changed out the driver rear caliper because the e brake wouldn’t engage then. I’m thinking the emergency cable is binding somehow?

[@Kllff.11]

شكراً لك 🌹😍

[@eriksolis208]

Do you have to left the whole vehicle for this process I wasn’t sure if your lifted just one side or full on jack stands

[@MechanicalMalarkey]

You could do one side at a time.

[@PSimon-xr3pw]

The caliper bracket bolt for 9gen accord needs to be torque down to 80 ft lbs

[@robax3r]

better have a hose clamp to swith the hose to the new caliper!

[@gregoryluther838]

Do you ever see any problems with the rubber brake hoses on Honda cars? When I do this to my wife's 2013 accord I think I will also replace the rubber brake lines? Thank you for the video

[@MechanicalMalarkey]

I don't recall any leaks from the hoses on any Hondas I've worked on.

[@gregoryluther838]

@@MechanicalMalarkey Not so much leaking but I have replaced old hoses that have deteriorated on the inside which kept the brake fluid from returning after the brake pedal had been released. This may not happen anymore with today’s fluids and materials used, but if your brakes are ever stuck on and dragging and you don’t know why and your car is pretty old, could be the rubber lines. Do you have any aftermarket replacements parts that you prefer to use?

[@MechanicalMalarkey]

@@gregoryluther838 I buy most of my parts from RockAuto, I don't have a ton of brand loyalty, but for brakes I often get Centric or other brands I know the names of like Raybestos or AC Delco.

[@BikeLifeHooligan]

What size wrench do I need for the caliper bracket bolts?

[@MechanicalMalarkey]

It's either a 17mm or a 14mm, I can't recall at the moment.

[@lilfishey96]

How did u not get drake fluid everywhere did u clamp them off?

[@lilfishey96]

Never mind lol