You can buy required replacement parts here: amzn.to/2FFPZWp (This is an Amazon affiliated link).
@deliverykp111 ай бұрын
Had just enough texts to explain what was going on, and the camera shots were perfect to show location of where everything was. I did mine today, took just short of an hour because of a stuck screw in my door handle, but otherwise it's perfect. I agree with others saying that it's an excellent video.
@meCarlosRodrigueZZ Жыл бұрын
Excellent video. I was able to replace this part using the video. Nothing else to add on. This is the way....although he makes it look easy. It will take some time to do it right. Blessings!
@chrisvan43284 жыл бұрын
Great video ! Worked well for me! Only issue is my door panel isn't flush anymore oh well
@DIYtime4 жыл бұрын
Thanks! Check maybe one of the fasteners didn’t align properly.
@chrisvan43284 жыл бұрын
@@DIYtime probably not. I will take the door panel off again today. Thanks
@MyUnquenchableThirst2 жыл бұрын
100% perfect. Exactly what I needed. Thank you!
@DIYtime2 жыл бұрын
🤦🏻♂️
@MichaelOfTroyWasHere2 жыл бұрын
Helpful Info: T30 Torx bit and 10mm socket
@عمرونيالمكي5 жыл бұрын
Thank you very much, brother, I swear I have benefited very much Thank you from Saudi Arabia
@DIYtime5 жыл бұрын
Awesome, I greatly appreciate it!
@jerryday28513 жыл бұрын
Nice video, You made that look so easy. Thanks
@DIYtime3 жыл бұрын
Glad it was helpful!
@rockyracooon44203 жыл бұрын
You my sir, are a savior!
@DIYtime3 жыл бұрын
🤠👍🏻 My pleasure!
@tedburing9995 Жыл бұрын
Great video, thank you
@hongdiep694 жыл бұрын
Thank you , I just watched and followed your instruction to replace the handle on my camry . I did it . Thanks’
@DIYtime4 жыл бұрын
Awesome!
@ezanderson88342 жыл бұрын
This video helped me so much thanks you
@Miguelapc244 жыл бұрын
Mejor explicado no podría ser. Excelente
@DIYtime4 жыл бұрын
👌🏻
@OmarHernandez-ld2yy6 ай бұрын
Thank you!!!
@mendezavala4817 Жыл бұрын
Good job my brother #10
@phillipmccollough87073 жыл бұрын
Great video.
@DIYtime3 жыл бұрын
Thanks!
@عمرونيالمكي5 жыл бұрын
I've shared your beautiful channel I hope you will be happy for your wonderful work
@DIYtime5 жыл бұрын
Thanks!
@michaelmarquez11883 жыл бұрын
Thank you so much for this video! 🥴
@DIYtime3 жыл бұрын
Glad it helped!
@danielflores24183 жыл бұрын
Thank you
@DIYtime3 жыл бұрын
Welcome!
@pjunior36923 жыл бұрын
Hey I need to replace the handle and the lock actuator.and tips for replacing the lock actuator?
@DIYtime3 жыл бұрын
Not sure, haven’t had a chance to do that yet.
@Pube836 жыл бұрын
Sick beats.
@DIYtime6 жыл бұрын
Yea, I like those too.
@lorenavillagrana24845 жыл бұрын
Excelente video, me sirvió mucho. Gracias!!!
@DIYtime5 жыл бұрын
Thank you!
@mickelsonmichael77568 жыл бұрын
hi, i gotta nissan altima 07 i was wondering if you could do a video how to replace a valve cover i notice to remove it theres an engine mount on top of it preventing it from removing. but i heard before doing that u need to put wooden blocks at the bottom to hold up the engine is that true or i dont need to do all that, just replace the valve cover?
@DIYtime8 жыл бұрын
Yes, that engine mount needs to be removed first. I also read about using wood blocks or supporting engine with hydraulic jack with one wood block. I tried it and was gonna record, but my jack is bad and it kept slowly lowering down after few minutes of holding engine. I had to put back the mount and wasn't able to replace valve cover. Then I almost bought a engine crane to do this job ($150 used), but my AC went out, and CVT transmission started jerking... So I just gave up on Nissan, parked it in garage and bought another car for now.
@DIYtime8 жыл бұрын
You do have to hold engine somehow. As soon as you remove that mount, engine starts falling back towards the firewall.
@mickelsonmichael77568 жыл бұрын
my altima isnt all in great shape too, i replaced my transmission once and my catalytic converter. the car makes small funny noises at times when pressing the gas or starting it up but i do understand the car has over 172,521 miles on it so i dont really pay too much attention to it. i have a powerbuild floor jack that can lift 4,000 lb ill use that to hold the engine when i replace the valve cover
@DIYtime8 жыл бұрын
Please let me know how it goes. I need to do mine too. I'll get better jack or crane soon to get the job done. Your tips or advice will be greatly appreciated!
@mickelsonmichael77568 жыл бұрын
ok no problem i will i subscribe to ur channel
@dma6546 жыл бұрын
Does every replacement handle for this car absolutely suck? I'm going to see if I can find factory ones. I'm already on my 4th or 5th handle.
@DIYtime6 жыл бұрын
The one I got from Amazon worked just fine.
@jersgmc6 жыл бұрын
Thanks!
@camorlandi2413 жыл бұрын
Where can I find the lock clips? The green and yellow ones?
@DIYtime3 жыл бұрын
U-pull junk yard is probably your only choice. eNay may have it too.
@adriansalazar38555 жыл бұрын
I need to replace the door handle but theres one more problem it has the child lock....so how can i do this ? Can you post a video of how to do it
@DIYtime5 жыл бұрын
It should be the same. The door in my video also has child lock.
@adriansalazar38555 жыл бұрын
@@DIYtime from what i can see the door on your video is opened and in my car the the door doesnt open. Because it has child lock and the handle is broken....so the door remains close
@DIYtime5 жыл бұрын
Try to take apart the handle inside and pull the cord going to the lock. This should open the door.
@Olasamj5 жыл бұрын
How do I replace the rear door handle of a Toyota corolla 2000 model?
@DIYtime5 жыл бұрын
Should be pretty similar process.
@antoniocarrizales5886 Жыл бұрын
👍✅
@That_Guy_Miggy5 жыл бұрын
It’s the same process on a corolla?
@DIYtime5 жыл бұрын
Probably not, but should be very similar.
@JuanLopez-sn7su2 жыл бұрын
I definitely missed something, I closed my door just to see if I could open it and now my door isn't opening.
@dma6546 жыл бұрын
I need to change a rear door handle as well. That's a serous pain in the ass. You've literaly have to take the door apart, metal parts and all to get to the handle mechanisms. The front are a lot easier.
@That_Guy_Miggy5 жыл бұрын
DMA right
@shannonsandifer37857 жыл бұрын
how do u change an outside door handle with roll down Windows
@shannonsandifer37857 жыл бұрын
on a 1998 toyota Corolla
@DIYtime7 жыл бұрын
+Shannon Sandifer I'm not sure, but should be similar to Camry. You start with door panel removal and than look for way to access door handle.
@msh0041zz3 жыл бұрын
I cant access it on the toyota corolla 2001 rear passenger, and its welded by metal